DOWNLOAD Sharp MX-5500N / MX-6200N / MX-7000N (serv.man134) Service Manual ↓ Size: 160.14 KB | Pages: 13 in PDF or view online for FREE

3/3

IMAGE SEND MODE,FAX MODE JOB LOG CODE LIST(CODE A-2)

CONTENTS OF CODE

CODE A-2

Content of communication interruption

88

In SMTP e-mail receive, an attached file cannot be stored in memory.
・ Cannot be stored in memory.
・ The number of items of acting receive data is the maximum, and an additional data cannot be
stored.

89

In SMTP e-mail receive, an error occurs in communication with the mail server.
・ Time-out occurs during e-mail receive.

90

After reservation by re-operation of document filing, conversion for image send cannot be
made.

91

Data cannot be written to the memory device when Scan To USB is executed.

 

・ The memory device is disconnected during writing to the memory device.

 

・ An error occurs due to a memory device trouble.

92

The USB device memory overflows during writing data into the memory device when "Scan to
USB" is executed.

93

When error in D-SMTP send (with recall)

 

・ An error response of 4XX occurs during communication with the SMTP server.

 

・ Time out occurs after establishment of connection with the SMTP server.

94

When busy in D-SMTP send
Time out occurs during establishment of connection with the SMTP server.

95

When the path is too long in execution of Scan To USB.

98

The copy inhibit pattern is detected when scanning a document.

99

A document which is inhibited to be copied such as a banknote is scanned.

1/2

IMAGE SEND MODE,FAX MODE JOB LOG CODE LIST(CODE C)

CONTENTS OF CODE

CODE C

Content of communication interruption

Send/Receive

00

When the conditions after 01 do not apply.

Send/Receive

01

Send length over

Send

02

EOL time up

Receive

03

Carrier detection time up

Receive

04

Time up of the communication start command from the machine side

Receive

05

Time up in phase C (8 min)

Send

06

Memory image decode error

Receive

07

Memory image decode error

Send

08

Time up between frames in phase C (Report code is 0 or 16.)

Send/Receive

09

Not used

-

10

Not used

-

11

Polarity reversion detection

Receive

12

Invalid command reception

Receive

13

Time up (1-minute timer/6-second time)

Receive

14

PUT error

Receive

15

In V.34 mode, time up is generated when shifting from Primary to Control. Receive

16

In V.34 mode, time up is generated when shifting from Control to Primary. Receive

17

Command receive time-up from MFP controller

Receive

18

Not used

-

19

Not used

-

20

Polarity reversion detection

Send

21

Invalid command reception

Send

22

Fallback retry number over

Send

23

Command retry number resend over

Send

24

Time up (T5 timer)

Send

25

Time up (T5 timer) in V.34 mode

Send

26

In V.34 mode, time up is generated when shifting from Primary to Control. Send

27

In V.34 mode, time up is generated when shifting from Control to Primary. Send

28

When sending the FSK signal, no response of send completion is sent back
from the MODEM chip within a certain time. (V.34, other than V.34)

Send

29

Not used

-

30

A communication error is generated between MFP controller and Modem
controller. (Report code is 0 or 16.)

-

31

DC current not detected (busy)

Send

32

Dial tone not detected (busy)

Send

33

Busy tone detection (busy)

Send

34

T0 time up (Remote machine not responding)

Send

35

T1 time up (Remote machine not responding)

Send

36

In dialing, polarity reversion detection (Remote machine not responding)

Send

37

Calling is not made (busy)<Collision detected (including CNG detection)>

Send

38

Not used

-

60

In resend of document filed data, an error occurs in decoding or coding.

Resend

61

In resend of document filed data, setting to inhibit resolution conversion is
made. (The resolution after resend is set to be Enlarged.)

Resend

62

In resend of document filed data, rotation setting is made for data which
cannot be rotated.

Resend

63

In resend of document filed data, data cannot be stored in HD after
conversion of resolution for resend.

Resend

64

In resending data of document file, during conversion for resending, the
number of IMS management pages exceeds the upper limit (999). (IT
occurs in OSA Scan to FTP also, resulting in memory over.)

Resend
OSAScanToFTP

70

E-mail header acquisition error

E-mail receive

71

Time out occurs during e-mail receive.

E-mail receive

72

Receive reject occurs during e-mail receive.

E-mail receive

73

Network communication cannot be made due to port disable.

Network send

2/2

IMAGE SEND MODE,FAX MODE JOB LOG CODE LIST(CODE C)

CONTENTS OF CODE

CODE C

Content of communication interruption

Send/Receive

74

An authentication of the POP server is failed when POP before SMTP is
enabled.

Network send

75

In the setting of SSL communication, when SSL communication is tried
but the server side does not support SSL.

Network send

80

There is no attached file in received e-mail.

E-mail receive

81

The attached file of received e-mail is not of TIFF type which is
supported.

E-mail receive

82

The TIFF type of the attached file in received e-mail cannot be
recognized.
ID error

E-mail receive

83

The TIFF type of the attached file in received e-mail cannot be
recognized.
Endian error

E-mail receive

84

The TIFF type of the attached file in received e-mail cannot be
recognized.
Version error

E-mail receive

85

The TIFF type of the attached file in received e-mail cannot be
recognized.
Tag data error

E-mail receive

86

The TIFF type of the attached file in received e-mail cannot be
recognized.
Tag parameter error

E-mail receive

87

The TIFF type of the attached file in received e-mail cannot be
recognized.
Header size error

E-mail receive

88

The TIFF type of the attached file in received e-mail cannot be
recognized.

E-mail receive

90

E-mail receive

91

E-mail receive

92

E-mail receive

2/2

IMAGE SEND MODE,FAX MODE JOB LOG CODE LIST(CODE C)

CONTENTS OF CODE

CODE C

Content of communication interruption

Send/Receive

74

An authentication of the POP server is failed when POP before SMTP is
enabled.

Network send

75

In the setting of SSL communication, when SSL communication is tried
but the server side does not support SSL.

Network send

80

There is no attached file in received e-mail.

E-mail receive

81

The attached file of received e-mail is not of TIFF type which is
supported.

E-mail receive

82

The TIFF type of the attached file in received e-mail cannot be
recognized.
ID error

E-mail receive

83

The TIFF type of the attached file in received e-mail cannot be
recognized.
Endian error

E-mail receive

84

The TIFF type of the attached file in received e-mail cannot be
recognized.
Version error

E-mail receive

85

The TIFF type of the attached file in received e-mail cannot be
recognized.
Tag data error

E-mail receive

86

The TIFF type of the attached file in received e-mail cannot be
recognized.
Tag parameter error

E-mail receive

87

The TIFF type of the attached file in received e-mail cannot be
recognized.
Header size error

E-mail receive

88

The TIFF type of the attached file in received e-mail cannot be
recognized.

E-mail receive

90

E-mail receive

91

E-mail receive

92

E-mail receive