MX-5500N, MX-6200N, MX-7000N (serv.man25). MX- PEX2 SERVICE MANUAL — Sharp Copying Equipment Peripheral (repair manual)

Model
MX-5500N MX-6200N MX-7000N (serv.man25)
Pages
99
Size
2.87 MB
Type
PDF
Document
Peripheral
Brand
Device
Copying Equipment / MX- PEX2 SERVICE MANUAL
File
mx-5500n-mx-6200n-mx-7000n-sm25.pdf
Date

View Sharp MX-5500N / MX-6200N / MX-7000N (serv.man25) Peripheral online

SERVICE MANUAL
Parts marked with "
" are important for maintaining the safety of the set. Be sure to replace these parts with
specified ones for maintaining the safety and performance of the set.
SHARP CORPORATION
CODE: 00ZMXPEX2/S1E
DIGITAL FULL COLOR 
MULTIFUNCTIONAL SYSTEM OPTION
PRINT CONTROLLER UNIT
MODEL
MX-PEX1
MX-PEX2
 
© 2006 Electronics for Imaging, Inc. 
Part Number 45059159
This documentation is protected by copyright, and all rights are reserved. No part of it may be reproduced or transmitted in any 
form or by any means for any purpose without express prior written consent from Electronics for Imaging, Inc. (“EFI”), except as 
expressly permitted herein. Information in this documentation is subject to change without notice and does not represent a 
commitment on the part of EFI. The documentation is further covered by “Legal Notices” distributed with this product, which can 
be found on the User Documentation CD. The documentation may be provided in conjunction with EFI Software (“Software”) 
and any other EFI product described in the documentation. The Software is furnished under license and may only be used or 
copied in accordance with the terms of the Software License Agreement, which can be found in the “Legal Notices” distributed with 
this product.
 
Contents
 
Overview
 
1
 
Scope of this guide
 
2
Tools needed
2
 
Precautions
 
3
 
Accessing the Fiery X3eTY2
 
6
 
Checking connections
 
10
 
Removing and replacing Fiery X3eTY2 components
 
12
Interface board
13
Dual in-line memory module (DIMM)
16
Battery
18
Motherboard
19
Service board
22
CPU cooling assembly
24
CPU
29
Exhaust fan
32
Power supply
33
Hard disk drive
37
 
Restoring functionality after service
 
42
Printing Fiery X3eTY2 pages
46
Verifying connection to the network
48
 
Fiery X3eTY2 system software
 
50
System software installation reminders
50
Installing system software over the network port
51
Installing system software using a USB flash drive
57
 
Specifications
 
64
Hardware features
64
Networking and connectivity
64
User software
64
Safety and emissions compliance
64
 
The troubleshooting process
 
65
Where problems occur
66
 
Before you go to the customer site
 
67
 
Preliminary on-site checkout
 
68
Checking external connections
68
Checking internal connections
68
Inspecting the system
69
 
Error codes and conditions
 
72
 
Clearing the CMOS and power-up settings
 
89
 
Index
 
1
Overview
 
Overview
 
The Fiery Print Controller MX-PEX1/MX-PEX2 adds computer connectivity and 
highly efficient PostScript and PCL printing capacity into Sharp MX-7000/6200/5500/
4500/3500 series copiers and printers. This service guide describes how to remove or 
replace Fiery Print Controller MX-PEX1/MX-PEX2 components and how to reinstall 
system software. 
 
N
 
OTE
 
:
 
The term “Fiery X3eTY2” is used in this manual to refer to the Fiery Print 
Controller MX-PEX1/MX-PEX2. The term “MFP” (multifunctional peripheral) is used 
to refer to any Sharp MX-7000/6200/5500/4500/3500 series copier or printer.
Generally, the Fiery X3eTY2 does not require regular maintenance. The Fiery X3eTY2 is 
shipped with all necessary software installed. Use the procedures in this guide to inspect, 
remove, reseat, or replace major hardware components and to reinstall system software. 
Replacement parts for the Fiery X3eTY2 are available from your authorized service 
support center. You must reinstall system software if you replace the hard disk drive 
(HDD) or update the system software. You can also reinstall system software as a way to 
troubleshoot the system.
 
F
 
IGURE
 
 A
 
Printing system
Networked computers 
or workstations
MFP with
Fiery X3eTY2 installed

Download Sharp MX-5500N / MX-6200N / MX-7000N (serv.man25) Peripheral

Here you can view online or download Sharp MX-5500N / MX-6200N / MX-7000N (serv.man25) Peripheral in pdf. This Peripheral can help you recover, restore, fix, disassemble and repair Sharp MX-5500N / MX-6200N / MX-7000N (serv.man25) Copying Equipment. Information contained in Sharp MX-5500N / MX-6200N / MX-7000N (serv.man25) service manual (repair manual) typically includes:

  • Disassembly, troubleshooting, programming, maintenance, remote, adjustment, installation and setup instructions.
  • Schematics, wiring and block diagrams.
  • Printed wiring boards (PWB) and printed circuit boards (PCB).
  • Parts list (bill of materials).