DOWNLOAD Sharp MX-5500N / MX-6200N / MX-7000N (serv.man18) Service Manual ↓ Size: 12.88 MB | Pages: 39 in PDF or view online for FREE

Model
MX-5500N MX-6200N MX-7000N (serv.man18)
Pages
39
Size
12.88 MB
Type
PDF
Document
Peripheral
Brand
Device
Copying Equipment / MX-FNX3 4 MX-RBX2 MXPNX2A-D SERVICE MANUAL-Disassembly Assembly-1
File
mx-5500n-mx-6200n-mx-7000n-sm18.pdf
Date

Sharp MX-5500N / MX-6200N / MX-7000N (serv.man18) Peripheral ▷ View online

MX-FNX4  DISASSEMBLY AND ASSEMBLY  6 – 1
MX-FNX4
Service Manual
 
[6] DISASSEMBLY AND 
ASSEMBLY
1. Finisher (MX-FNX3/4)
A. Exterior cover
(1) Front cover
a. Removal of front cover
• MX-FNX4
1) Open the front cover [1], and remove the clip [2].
2) Lift the front cover [1], and remove it.
• MX-FNX3
1) Open the front upper cover [1], and remove the clip [2].
2) Lift the front upper cover [1] to remove it.
3) Remove the two screws [3] to remove the cover [4].
4)
Remove the three screws [5], and lift and remove the front
lower cover [6].
(2) Rear cover
a. Removal of rear cover
• MX-FNX4
1)
Slide the tray cable cover [1] to the tray side, and remove it. 
2)
Remove the six screws [2], and lift and remove the rear cover
[3].
• MX-FNX3
1)
Remove the three screws [1], and lift and remove the rear
cover [2].
[1]
[2]
[1]
[2]
[3]
[4]
[5]
[6]
[2]
[1]
[3]
[2]
[1]
[2]
MX-FNX4  DISASSEMBLY AND ASSEMBLY  6 – 2
(3) Left upper cover
a. Removal of front cover
1) Open the front cover [1], and remove the clip [2].
2) Lift the front cover [1], and remove it.
* For MX-FNX3, refer to 1-A-(1)-a.
b. Removal of rear cover
1) Slide the tray cable cover [1] to the tray side, and remove it. 
2) Remove the six screws [2], and lift and remove the rear cover
[3].
* For MX-FNX3, refer to 1-A-(2)-a.
c. Removal of saddle inlet front inside cover
1) Remove the three screws [1], and remove the saddle inlet front
inside cover [2].
d. Removal of front inside upper cover
• MX-FNX4
1)
Remove the four screws [1], and remove the front inside upper
cover [2].
• MX-FNX3
1)
Remove the four screws [1] to remove the front inside upper
cover [2].
e. Removal of left upper cover
1)
Remove the two screws [1].
2)
With the upper door [2] open, tilt the left upper cover [3] to the
right, and remove it. 
[1]
[2]
[2]
[1]
[3]
[2]
[1]
[2]
[1]
[1]
[2]
[1]
[1]
[2]
[3]
[2]
[1]
MX-FNX4  DISASSEMBLY AND ASSEMBLY  6 – 3
CAUTION: When installing, be sure to engage the two pawls [4] of
the left upper cover with the metal plates. 
(4) Upper door
a. Removal of front cover
1) Open the front cover [1], and remove the clip [2].
2) Lift the front cover [1], and remove it.
* For MX-FNX3, refer to 1-A-(1)-a.
b. Removal of rear cover
1) Slide the tray cable cover [1] to the tray side, and remove it. 
2) Remove the six screws [2], and lift and remove the rear cover
[3].
* For MX-FNX3, refer to 1-A-(2)-a.
c. Removal of saddle inlet front inside cover
1)
Remove the three screws [1], and remove the saddle inlet front
inside cover [2].
d. Removal of front inside upper cover
1)
Remove the four screws [1], and remove the front inside upper
cover [2].
* For MX-FNX3, refer to 1-A-(3)-d.
e. Removal of left upper cover
1)
Remove the two screws [1].
2)
With the upper door [2] open, tilt the left upper cover [3] to the
right, and remove it. 
[4]
[1]
[2]
[2]
[1]
[3]
[2]
[1]
[2]
[1]
[1]
[2]
[1]
[3]
[2]
[1]
MX-FNX4  DISASSEMBLY AND ASSEMBLY  6 – 4
CAUTION: When installing, be sure to engage the two pawls [4] of
the left upper cover with the metal plates.
f. Removal of upper door
1) Open the upper door [1], and disengage the hooks [2] at two
positions.
2) Remove the screw [3], and remove the upper door [1].
(5) Grate-shaped upper guide
a. Removal of front cover
1) Open the front cover [1], and remove the clip [2].
2) Lift the front cover [1], and remove it. 
* For MX-FNX3, refer to 1-A-(1)-a.
b. Removal of rear cover
1)
Slide the tray cable cover [1] to the tray side, and remove it. 
2)
Remove the six screws [2], and lift and remove the rear cover
[3].
* For MX-FNX3, refer to 1-A-(2)-a.
c. Removal of saddle inlet front inside cover
1)
Remove the three screws [1], and remove the saddle inlet front
inside cover [2].
d. Removal of front inside upper cover
1)
Remove the four screws [1], and remove the front inside upper
cover [2]. 
* For MX-FNX3, refer to 1-A-(3)-d.
[4]
[3]
[1]
[2]
[1]
[2]
[2]
[1]
[3]
[2]
[1]
[2]
[1]
[1]
[2]
[1]
Page of 39
Display

Sharp MX-5500N / MX-6200N / MX-7000N (serv.man18) Peripheral ▷ Download

  • DOWNLOAD Sharp MX-5500N / MX-6200N / MX-7000N (serv.man18) Service Manual ↓ Size: 12.88 MB | Pages: 39 in PDF or view online for FREE
  • Here you can View online or download the Peripheral for the Sharp MX-5500N / MX-6200N / MX-7000N (serv.man18) in PDF for free, which will help you to disassemble, recover, fix and repair Sharp MX-5500N / MX-6200N / MX-7000N (serv.man18) Copying Equipment. Information contained in Sharp MX-5500N / MX-6200N / MX-7000N (serv.man18) Peripheral (repair manual) includes:
  • Disassembly, troubleshooting, maintenance, adjustment, installation and setup instructions.
  • Schematics, Circuit, Wiring and Block diagrams.
  • Printed wiring boards (PWB) and printed circuit boards (PCB).
  • Exploded View and Parts List.