MX-5500N, MX-6200N, MX-7000N (serv.man68). Drive Section-Detailed Section — Sharp Copying Equipment Service Manual (repair manual)

Model
MX-5500N MX-6200N MX-7000N (serv.man68)
Pages
32
Size
8.87 MB
Type
PDF
Document
Service Manual
Brand
Device
Copying Equipment / Drive Section-Detailed Section
File
mx-5500n-mx-6200n-mx-7000n-sm68.pdf
Date

View Sharp MX-5500N / MX-6200N / MX-7000N (serv.man68) Service Manual online

MX-7000N  DRIVE SECTION  Q – 1
MX-7000N
Service Manual
 
[Q] DRIVE SECTION
1. Disassembly and assembly
A. Main drive unit (CL)
(1) Main drive unit (CL)
1)
Remove the rear cabinet. (Refer to the "[A] EXTERNAL OUT-
FIT".)
2)
Remove the screws (A), and open the control box (B).
3)
Remove the screws (C), and remove the flywheel (D) and (E).
* When installing, check to confirm that has not come in con-
tact with the harness etc.
* When installing, the order of the installation is the flywheel
(E), the  flywheel (D). (Equipping the mark to each color.)
Unit
Page
A
Main drive unit (CL)
Q - 1
B
Main drive unit (BK)
Q - 4
C
Toner transport drive unit
Q -11
D
PS drive unit
Q -16
E
Tandem drive unit
Q -21
F
Multistage drive unit
Q -28
Unit
Parts
Page
1
Main drive unit (CL)
a
Developement drive 
motor_CL
Q - 2
b
Drum motor_Y
Q - 3
c
Drum motor_M
d
Drum motor_C
e
Y phase detection
Q - 3
f
M phase detection
g
C phase detection
h
Transfer belt separation 
detection sensor CL
Q - 4
1-a
1-h
1-d
1-g
1-f
1-e
1-b
1-c
1
Unit
1
Main drive unit (CL)
1
B
B
A
A
D
E
C
MX-7000N  DRIVE SECTION  Q – 2
4)
Disconnect the connectors (F). Remove the harness (H) from
the wire saddles (G). Remove the screws (I), and remove the
main drive unit (CL) (J).
a. Developement drive motor_CL
1)
Remove the rear cabinet. (Refer to the "[A] EXTERNAL OUT-
FIT".)
2)
Remove the screws (A), and open the control box (B).
3)
Remove the screws (C), and remove the flywheel (D) and (E).
* When installing, check to confirm that has not come in con-
tact with the harness etc.
* When installing, the order of the installation is the flywheel
(E), the flywheel (D). (Equipping the mark to each color.)
4)
Disconnect the connector (F). Remove the screws (G), and
remove the developement dirve motor_CL (H).
Unit
Parts
1
Main drive unit (CL)
a
Developement dirve motor_CL
J
1
F
I
G
G H
F
1-a
B
A
A
D
E
C
G
G
F
H
1-a
G
MX-7000N  DRIVE SECTION  Q – 3
b. Drum motor_Y, Drum motor_M, Drum motor_C
1)
Remove the rear cabinet. (Refer to the "[A] EXTERNAL OUT-
FIT".)
2)
Remove the screws (A), and open the control box (B).
3)
Remove the screws (C). Remove the flywheel (D), the flywheel
(E), and the flywheel (F).
* When installing, check to confirm that has not come in con-
tact with the harness etc.
* When installing, the order of the installation is the flywheel
(E), the flywheel (D). (Equipping the mark to each color.)
The flywheel (F) is out of the order.
4)
Disconnect the connectors (G). Remove the screws (H), and
remove the drum motors (I) of each color.
* Be careful to wiring of harnesses.
c. Y phase detection, M phase detection, C phase detection
1)
Remove the rear cabinet. (Refer to the "[A] EXTERNAL OUT-
FIT".)
2)
Remove the screws (A), and open the control box (B).
Unit
Parts
1
Main drive unit (CL)
b
Drum motor_Y
c
Drum motor_M
d
Drum motor_C
1-b
1-c
1-d
B
A
A
C
F
D
E
C
Unit
Parts
1
Main drive unit (CL)
e
Y phase detection
f
M phase detection
g
C phase detection
H
H
H
H
H
G
G
I
1-b
G
I
1-c
I
1-d
1-e
1-f
1-g
B
A
A
MX-7000N  DRIVE SECTION  Q – 4
3)
Remove the screws (C). Remove the flywheel (D), the flywheel
(E).
* When installing, check to confirm that has not come in con-
tact with the harness etc.
* When installing, the order of the installation is the flywheel
(E), the flywheel (D). (Equipping the mark to each color.)
4)
Remove the screws (F), and remove the phase detections (G)
of each color. Disconnect the connectors (H).
d. Transfer belt separation sensor CL
1)
Remove the rear cabinet. (Refer to the "[A] EXTERNAL OUT-
FIT".)
2)
Remove the main drive unit (CL). (Refer to the "(1) Main drive
unit (CL)".)
3)
Disconnect the connector (A), and remove the transfer belt
separation sensor CL (B).
B. Main drive unit (BK)
(1) Main drive unit (BK)
1)
Remove the rear cabinet. (Refer to the "[A] EXTERNAL OUT-
FIT".)
Unit
Parts
1
Main drive unit (CL)
h
Transfer belt separation sensor CL
D
E
C
F
G
H
G
G
G
1-e
1-f
1-g
1-h
Unit
Parts
Page
1
Main drive unit (BK) 
a
Developement drive motor_K
Q - 6
b
Developement drive motor
Q - 7
c
Drum motor_K
Q - 7
d
Belt separation clutch 
(normal)
Q - 8
e
Belt separation clutch 
(reverse)
f
K phase detection
Q - 9
g
Charger cleaner motor
Q -10
h
CCM rotation detection
i
PTC cleaner motor
Q -10
Unit
1
Main drive unit (BK)
A
B
1-h
1-d
1-b
1-i
1-e
1-a
1
1-g
1-c
1-f
1-h
1
MX-7000N  DRIVE SECTION  Q – 5
2)
Open the front cabinet (A).
3)
Turn the blue screw (B) counterclockwise. Check that the lock
is released as shown in (C).
* Failure to complete this step may damage the primary trans-
fer belt.
4)
Remove the screw (D). Hold the drum fixing knob (E) by the
hand to not rotate, remove the screw (F). Remove the drum
fixing knob (E).
5)
Pull out the fixing cover (G).
6)
Loosen the screws (H), and open the cover (I) of the process
section.
7)
Loosen the screw (J), pull out slightly the developement unit
(BK) (K) and the OPC drum unit (BK) (L).
8)
Remove the screws (M), and open the control box (N).
A
B
C
E
D
F
G
H
H
I
J
K
L
N
N
M
M

Download Sharp MX-5500N / MX-6200N / MX-7000N (serv.man68) Service Manual (Repair Manual)

Here you can view online or download Sharp MX-5500N / MX-6200N / MX-7000N (serv.man68) Service Manual in pdf. This Service Manual can help you recover, restore, fix, disassemble and repair Sharp MX-5500N / MX-6200N / MX-7000N (serv.man68) Copying Equipment. Information contained in Sharp MX-5500N / MX-6200N / MX-7000N (serv.man68) service manual (repair manual) typically includes:

  • Disassembly, troubleshooting, programming, maintenance, remote, adjustment, installation and setup instructions.
  • Schematics, wiring and block diagrams.
  • Printed wiring boards (PWB) and printed circuit boards (PCB).
  • Parts list (bill of materials).