MX-5500N, MX-6200N, MX-7000N (serv.man75). Whole Installation Manual — Sharp Copying Equipment Service Manual (repair manual)

Model
MX-5500N MX-6200N MX-7000N (serv.man75)
Pages
104
Size
27.77 MB
Type
PDF
Document
Service Manual
Brand
Device
Copying Equipment / Whole Installation Manual
File
mx-5500n-mx-6200n-mx-7000n-sm75.pdf
Date

View Sharp MX-5500N / MX-6200N / MX-7000N (serv.man75) Service Manual online

INSTALLATION MANUAL
Parts marked with "
" are important for maintaining the safety of the set. Be sure to replace these parts with
specified ones for maintaining the safety and performance of the set.
SHARP CORPORATION
CONFIGURATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .i
[ 1 ] MX-5500N/6200N/7000N (Main unit)  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  1-1
[ 2 ] MX-LCX2 (Large capacity tray (A4))  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  2-1
[ 3 ] MX-LCX3 (Large capacity tray (A3))  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  3-1
[ 4 ] MX-RBX2 (Paper pass unit) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  4-1
[ 5 ] MX-CFX1 (Inserter) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  5-1
[ 6 ] MX-PNX2A/B/C/D (Punch module)  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  6-1
[ 7 ] MX-FNX3 (4K finisher)  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  7-1
[ 8 ] MX-FNX4 (4K Saddle stitch finisher). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  8-1
[ 9 ] MX-FRX3, MX-FRX3U (Data security kit). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  9-1
[10] MX-PKX1 (PS3 expansion kit) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  10-1
[11] AR-PF1 (Barcode font kit)  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11-1
[12] MX-AMX1 (Application integration module) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  12-1
[13] MX-FXX1 (Facsimile expansion kit). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  13-1
[14] MX-FWX1 (Internet Fax expansion kit) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  14-1
CONTENTS
CODE: 00ZMX7000/I1E
DIGITAL FULL COLOR 
MULTIFUNCTIONAL SYSTEM
MODEL
MX-5500N
MX-6200N
MX-7000N
MX-7000N  CONFIGURATION  - i
MX-7000N
Service Manual
 
CONFIGURATION
1. Configuration
A. Lineup (Main unit and option)
Digital full color
multifunctional system
(Copier/Printer/Scanner)
(MX-5500N)
(MX-6200N)
(MX-7000N)
Large capacity tray A4
(MX-LCX2)
Saddle stitch finisher
(MX-FNX4)
Finisher
(MX-FNX3)
Inserter
(MX-CFX1)
Punch module
(MX-PNX2A/B/C/D)
Paper pass unit
(MX-RBX2)
Staple cartridge
Staple cartridge
(AR-SC3)
(AR-SC2)
Large capacity tray A3
(MX-LCX3)
Facsimile
expansion kit
(MX-FXX1)
(MX-FWX1)
(MX-AMX1)
(MX-PKX1)
Internet FAX
expansion kit
Sharpdesk
license kit
PS3 expansion kit
(AR-PF1)
Barcode font kit
Application
integration module
(MX-USX1/5)
(MX-US10/50/A0)
Data security kit
(MX-FRX3U)
(MX-FRX3)
Authentication version
Commercial version
MX-7000N  CONFIGURATION  - ii
B. Machine configuration
C. Combination of options list
Copier memory (Local memory) (MB)
1GB
Printer memory (System memory) (MB)
896MB
Copier
Standard provision
PCL printer
Standard provision
PS printer
Option (Product key target.)
Main body LCD
Color VGA 10.4"
FAX
Option (No support for some areas.)
Scanner
Standard provision
Filing
Standard provision
HDD
Standard provision
DSPF
Standard provision
Automatic duplex
Standard provision
Security
Option (Product key target.)
Internet Fax
Option (Product key target.)
Section
Name
Model name
Remarks
Paper feed system
Large capacity tray
MX-LCX2
(A4)
Large capacity tray
MX-LCX3
(A3)
Paper exit system
Paper pass unit
MX-RBX2
• Required when the finisher or the saddle stitch finisher is 
installed.
Inserter
MX-CFX1
• The finisher or the saddle stitch finisher is required.
• When combining the finisher with the inserter, the punch unit is 
required.
Finisher
MX-FNX3
• Simultaneous installation with the saddle stitch finisher is 
inhibited.
Saddle stitch finisher
MX-FNX4
• Simultaneous installation with the finisher is inhibited.
Punch module
MX-PNX2A
• Requires the finisher or the saddle stitch finisher and the paper 
pass unit.
MX-PNX2B
MX-PNX2C
MX-PNX2D
Staple cartridge (For finisher)
AR-SC2
Staple cartridge (For saddle stitch finisher)
AR-SC3
Electrical system (ROM)
Barcode font kit
AR-PF1
Data security kit
MX-FRX3U
(Commercial version)
Data security kit
MX-FRX3
(Authentication version)
Software
PS3 expansion kit
MX-PKX1
Internet Fax expansion kit
MX-FWX1
Sharpdesk 1 license kit
MX-USX1
Sharpdesk 5 license kit
MX-USX5
Sharpdesk 10 license kit
MX-US10
Sharpdesk 50 license kit
MX-US50
Sharpdesk 100 license kit
MX-USA0
Application integration module
MX-AMX1
FAX system
Facsimile expansion kit
MX-FXX1
No support for some areas.
MX-7000N  MX-5500N/6200N/7000N  1 – 1
MX-7000N
Service Manual
 
[1] MX-5500N/6200N/7000N
1. Installing (use) conditions
Before installing the machine, check that the following installing
(use) conditions are satisfied.
If the installing (use) conditions are not satisfied, the machine may
not display full performances, resulting in troubles. It may also
cause safety problems. Therefore, be sure to arrange the installing
(use) conditions before setting up the machine.
A. Bringing space
For installation of a large size machine, be sure to check that the
door size is great enough before bringing in.
B. Installing space
The following space must be provided around the machine in order
to assure machine performances and proper operations. If any
option is installed, provide the additional space for installing it.
Especially the space at the rear of the machine must be provided
sufficiently. If not, the machine cannot exhibit functions against
heat and dust, causing some troubles.
C. Power source (Capacity, voltage, frequency, 
safety, plug)
If the power specifications are not satisfied, the machine cannot
exhibit full performances and may cause safety trouble.
Strictly observe the following specifications.
(1) Power capacity
Check that the following power capacity is satisfied. If not, addition-
ally provide a power source.
(2) Power voltage
Measure the voltage during copying to check that the voltage is in
the range of the specified voltage 
±10%.
If the voltage is outside the specified range, use thicker lead wires
to reduce impedance. (An electrical work is required.)
Use of a step-up transformer is also available. In this case, the
capacity must be great enough for the max. Power consumption of
the machine.
(3) Power frequency, waveform
The frequency must be within the range of the specified frequency
±2%. If power waveform is deformed, a trouble may occur.
(4) Safety
Be sure to properly ground the machine.
(5) Power plug
Check the form of the power plug. If the shape does not match, do
not use it.
D. Floor strength and level
This machine is considerably heavy and becomes heavier with an
option installed. The floor must be strong enough for assuring
safety.
If the floor is not level, the toner density control is not normal, 
and the copy quality may be adversely affected.
If not, color shift or image distortion may occur.
E. Direct rays of the sun, dust, temperature, 
humidity, gasses, chemicals, vibration
(1) Temperature and humidity
This machine is designed to perform properly under the specified
temperature and humidity. If the temperature and humidity exceeds
the specified range, the machine may not operate properly and or
cause equipment failure.
Especially when the humidity is too high, paper absorbs humidity to
cause a paper jam or dirty copy.
Do not install the machine near a heater, a cooler, or a humidifier.
Dew may be formed inside the machine to cause a trouble. Use
enough care for ventilation.
• Working environment
Temperature: 10 to 35
°C
Humidity: 20 to 85% RH
Atmospheric pressure: 590 to 1013hPa (altitude: 0 to 2000 m)
No
Content
1
Bringing space
2
Installing space
3
Power source (Capacity, voltage, frequency, safety)
4
Floor strength
5
Direct rays of the sun, dust, temperature, humidity, gasses, 
chemicals
Power capacity
Japan
20A or more
EX 100V
15A or more
EX 200V
10A or more
30cm
30cm
45cm
85%
(humidity)
(Temperature)
60%
20%
MX-7000N  MX-5500N/6200N/7000N  1 – 2
(2) Dust
If dust enters the machine, it may cause dirty copy and a paper
jam, resulting in a shortened lifetime.
(3) Direct rays of the sun
If the machine is installed under the rays of the sun, the exterior of
the machine may be discolored and abnormal copies may be pro-
duced.
(4) Gases and chemicals
Do not install the machine at a place where there are gases and
chemicals. Especially be careful to avoid installation near a diazo-
type copier, which produces ammonium gas.
Copy quality may be adversely affected and a trouble may be
caused.
(5) Vibration
Avoid installation near a machine which produces vibrations.
If vibrations are applied to the copier machine, copy images may be
deflected and a trouble may be caused.
2. Transit and delivery
A. Implements, facility, and manpower
It is recommendable to use a forklift for bringing in the machine for
safety.
If no forklift is available, Be sure to use the skid slope (DKIT-
0367FCZZ). Be careful to safety and pull the machine down. The
carrying in must ensure manpower of four persons or more for
safety. The machine is considerably heavy, and requires safety
precautions for delivery and installation.
Transit of the machine must be made in packed condition to the
installing place.
Since the hard disk drive is built in the machine, use care not to
exert vibrations or shocks to the machine when in transit.
B. Delivery
Remove the packing materials prior to installation in the office envi-
ronment.
3. Unpacking
A. Pulling out of the main unit
1)
Remove the top case, the top cushion, the packing case, and
the bundled item.
No
Content
Method
1
Implements, facility, and 
manpower
Use a forklift. (If no forklift is 
available, ensure manpower of four 
persons or more, and use the skid 
slope (DKIT-0367FCZZ)).
2
Delivery
Transit must be made in packed 
condition.

Download Sharp MX-5500N / MX-6200N / MX-7000N (serv.man75) Service Manual (Repair Manual)

Here you can view online or download Sharp MX-5500N / MX-6200N / MX-7000N (serv.man75) Service Manual in pdf. This Service Manual can help you recover, restore, fix, disassemble and repair Sharp MX-5500N / MX-6200N / MX-7000N (serv.man75) Copying Equipment. Information contained in Sharp MX-5500N / MX-6200N / MX-7000N (serv.man75) service manual (repair manual) typically includes:

  • Disassembly, troubleshooting, programming, maintenance, remote, adjustment, installation and setup instructions.
  • Schematics, wiring and block diagrams.
  • Printed wiring boards (PWB) and printed circuit boards (PCB).
  • Parts list (bill of materials).