DOWNLOAD Sharp MX-5500N / MX-6200N / MX-7000N (serv.man31) Service Manual ↓ Size: 3.06 MB | Pages: 10 in PDF or view online for FREE

Model
MX-5500N MX-6200N MX-7000N (serv.man31)
Pages
10
Size
3.06 MB
Type
PDF
Document
Peripheral
Brand
Device
Copying Equipment / MX-CFX1 Inserter-Installation Manual
File
mx-5500n-mx-6200n-mx-7000n-sm31.pdf
Date

Sharp MX-5500N / MX-6200N / MX-7000N (serv.man31) Peripheral ▷ View online

MX-7000N  MX-CFX1  5 – 1
MX-7000N
Service Manual
 
[5] MX-CFX1
1. Unpacking
A. Removal of the inserter
* For removal of the inserter, manpower of two persons or more is
required.
1)
Remove the packing cushion, and bundled items from packing
cusion.
2)
Holding the upper part of the inserter by two people, pull up the
inserter, and make it stand upright.
3)
Pull out the inserter from packing case.
B. Removal of the protection material
1)
Remove the fixing tapes and protection material.
MX-7000N  MX-CFX1  5 – 2
2)
Open the top door, and remove the fixing tape and protection
material.
C. Check the packed items
1)
Check that all the items are included in the package.
2. Installation
<Note before installation>
* Before installing the MX-CFX1, unpack the MX-FNX3 or MX-
FNX4.
A. Installation of the FIN connection fixture A/B
1)
Fix the FIN connection fixture B (Package part No. 7) to the
FIN connection fixture A (Package part No. 6) with the fixing
screws (Package part No. 1).
* Be careful that a fixed part of FIN connection fixture B is dif-
ferent according to the three kind of combination of con-
nected equipment. (MX-FNX4 only, MX-FNX4 and MX-
PNX2, MX-FNX3 and MX-PNX2)
2)
Fix the FIN connection fixture A (Package part No. 6) to the fin-
isher with the fixing screws (Package part No. 1).
B. Installation of the connection fixture F/R
* The connection fixture F and R installed in the inserter are differ-
ent depending on the model that connects inserters. Use the
connection fixture F/R and the fixing screws bundled to the
model (MX-PNX2, MX-FNX3, MX-FNX4) that connects inserters.
• Connection fixture F/R for MX-PNX2
(Screw used for installation : Package part No.4 of MX-PNX2)
No.
Names of bundles
Quantity
1
Binding head round tapping M4x7
12
2
Binding head tapping M4x20
2
3
Binding head M4x12
2
4
Binding head P tight M4x14
2
5
Rail
1
6
FIN connection fixture A
1
7
FIN connection fixture B
1
8
Latch reception parts on main unit
2
9
positioning pin
1
1
2
3
4
5
6
7
8
9
X4
X3+P
X4+P
MX-PNX2
MX-FNX4
MX-FNX4
+
MX-PNX2
MX-FNX3
+
P
P
MX-7000N  MX-CFX1  5 – 3
• Connection fixture F/R for MX-FNX3
(Screw used for installation : Package part No.3 of MX-FNX3)
• Connection fixture F/R for MX-FNX4
(Screw used for installation : Package part No.3 of MX-FNX4)
1)
Fix the connection fixture F to the inserter with the fixing
screws.
* The following figure is explanation of the connection fixture
and the screws for the connected with MX-PNX2 as exam-
ple.
2)
Fix the connection fixture R to the inserter with the fixing
screws.
C. Connection of the inserter and finisher (Punch 
unit)
1)
Attach the inserter to the finisher (or Punch unit).
* Match the sign of the inserter to connection plate, and
engage the inserter.
2)
Open the front door of finisher (or Punch unit).
3)
Fix the inserter and finisher (or Punch unit) with the fixing
screw (Package part No. 4 of MX-FNX3 or MX-FNX4).
X3
X3
X4
X4
MX-7000N  MX-CFX1  5 – 4
4)
Close the front cover of the finisher (or Punch unit).
5)
Remove the screws on rear side of the finisher (or Punch unit),
and remove the rear cover.
6)
Attach the fixing screw (Package part No. 4 of MX-FNX3 or
MX-FNX4).
7)
Install the rear cover of the finisher (or Punch unit) with the fix-
ing screws.
D. Install of the latch reception parts and the 
positioning pin
1)
Install the latch reception parts (Package part No. 8) to the
main unit with the fixing screws (Package part No. 1).
2)
Install the positioning pin (Package part No. 9) to the main unit
with the fixing screws (Package part No. 3).
* Be careful to the direction of the installation.
Page of 10
Display

Sharp MX-5500N / MX-6200N / MX-7000N (serv.man31) Peripheral ▷ Download

  • DOWNLOAD Sharp MX-5500N / MX-6200N / MX-7000N (serv.man31) Service Manual ↓ Size: 3.06 MB | Pages: 10 in PDF or view online for FREE
  • Here you can View online or download the Peripheral for the Sharp MX-5500N / MX-6200N / MX-7000N (serv.man31) in PDF for free, which will help you to disassemble, recover, fix and repair Sharp MX-5500N / MX-6200N / MX-7000N (serv.man31) Copying Equipment. Information contained in Sharp MX-5500N / MX-6200N / MX-7000N (serv.man31) Peripheral (repair manual) includes:
  • Disassembly, troubleshooting, maintenance, adjustment, installation and setup instructions.
  • Schematics, Circuit, Wiring and Block diagrams.
  • Printed wiring boards (PWB) and printed circuit boards (PCB).
  • Exploded View and Parts List.