MX-5500N, MX-6200N, MX-7000N (serv.man134). ISSUING EXPLANATORY MATERIAL OF JOB LOG CODES. — Sharp Copying Equipment Technical Bulletin (repair manual)

Model
MX-5500N MX-6200N MX-7000N (serv.man134)
Pages
13
Size
160.14 KB
Type
PDF
Document
Technical Bulletin
Brand
Device
Copying Equipment / ISSUING EXPLANATORY MATERIAL OF JOB LOG CODES.
File
mx-5500n-mx-6200n-mx-7000n-sm134.pdf
Date

View Sharp MX-5500N / MX-6200N / MX-7000N (serv.man134) Technical Bulletin online

 
 
 
Sharp Electronics (UK) Ltd., Technical Services Group
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
1. Model Name:
  
MX-M283N/M363N/M363U/M453N/M453U/M503N/M503U 
   MX-M850/M950/M1100 
   MX-B381/B401/C310/C311/C380/C381/C400/C401,                                                    
DX-C310/C311/C400/C401 
   MX-5500N/6200N/7000N/6201N/7001N 
   MX-1800N/2300G/2300N/2700G/2700N/2301N/2600G/2600N/3100G/3100N 
   MX-3500N/3501N/4500N/4501N/4100N/4101N/5000N/5001N 
 
2. Description:
 
We issue the explanatory material of JOB LOG codes by inquiries from 
the field
 
About JOB LOG CODE: 
The JOB LOG in csv file format for viewing is available by downloading onto a PC 
using the Web Page mode, or by downloading onto USB memory using 
simulation 56-4. 
Among the items in the JOB LOG, there are items called JOB LOG CODEs. The 
JOB LOG CODE refers to an alphanumeric record described in the “Error cause” 
field of a JOB LOG, and each code has specific meaning.  
There are two types of JOB LOG CODE LISTs, “Printer mode” and “Image send 
and fax mode” lists. 
 
1. Printer mode JOB LOG CODE LIST 
A printer mode JOB LOG CODE LIST is described in a 3-digit code. 
For each JOB LOG CODE, descriptions are provided about causes, actions, and 
messages that appear on the status monitor at the same time as JOB LOG 
CODES are recorded. 
ISSUING EXPLANATORY MATERIAL OF JOB LOG 
CODES. 
TECHNICAL BULLETIN 
Date:  
7
th
 October 2009 
Model:  
See Below 
Ref.:  
 
Colour:  
White 
Page:  
1 of 1 
 
 
 
Sharp Electronics (UK) Ltd., Technical Services Group
 
 
2. Image send and fax mode JOB LOG CODE LIST 
JOB LOG CODES are divided into three part, each of which is made of a 2-digit 
code. The 2-digit codes have specific meanings respectively. 
An actual code to be recorded is described in a 6-digit code, which is a 
combination of the three kind of codes. 
CODE A (two digits)  CODE B (two digits)  CODE C (two digits) 
 
(Outline of codes) 
 
 
Refer to attached list for details. 
 
1/5
PRINTER MODE JOB LOG CODE LIST 
CODE
Cause
Item
Remedy
SMON Message
201
Due to ERDH memory full, only one set is
printed though the multiple sets were
specified.
ERDH memory
Please print after the print job is gone from the print
queue.  If the problem still recurs, please delete the
data in Quick File folder.
The requested job could not be completed correctly due
to the following reason:
(Hard disk full ormemory full)
202
Reserved
Reserved
203
Reserved
Reserved
204
* Staple function is unavailable for the
selecteed output tray
* Staple option is not connected.
Staple/Delivery
section
* Please select the available output tray for Staple.
* Please check the driver option settings.
The requested job could not be completed correctly due
to the following reason:
(Staple: No function)
205
Reserved
Reserved
206
* “Disabling of Stapler” in “Disabling of
Devices” is selected.
* “Disabling of Finisher” in “Disabling of
Devices” is selected.
Staple
* Cancel “Disabling of Stapler” of “Disabling of
Devices” by the Administrator
* Cancel “Disabling of Finisher” of “Disabling of
Devices” by the Administrator
The requested job could not be completed correctly due
to the following reason:
(Staple: Prohibited) Please ask your administrator.
207
Reserved
Reserved
208
Reserved
Reserved
209
Reserved
Reserved
20A
* Punch function is unavailable for the
selected output tray
* Punch option is not connected.
Output tray/Punch
* Please select the available output tray for Punch.
* Please check the driver option settings.
The requested job could not be completed correctly due
to the following reason:
(Punch: No function)
20B
Reserved
Reserved
20C
* “Disabling of Punch” in “Disabling of
Devices” is selected.
* “Disabling of Finisher” in “Disabling of
Devices” is selected.
Punch
* Cancel “Disabling of Punch” of “Disabling of
Devices” by the Administrator
* Cancel “Disabling of Finisher” of “Disabling of
Devices” by the Administrator
The requested job could not be completed correctly due
to the following reason:
(Punch: Prohibited)
20D
Reserved
Reserved
20E
Reserved
Reserved
20F
Reserved
Reserved
210
Selected output tray is disabled in “Disabling
of Devices”
Delivery section
* Please select other available output tray.
* Cancel “Disabling of Finisher” of “Disabling of
Devices” by the Administrator
The requested job could not be completed correctly due
to the following reason:
(Selected output tray:Prohibited) Please ask your
administrator.
211
Selected output tray has a trouble.
Delivery section
* Please select other available output tray.
* Check the delivery section, and then repair it.
The requested job could not be completed correctly due
to the following reason:
(Selected output tray:Failure)Please ask your
administrator.
212
There’s no selected output tray.
Delivery section
* Please check the driver option settings.
The requested job could not be completed correctly due
to the following reason:
(Selected output tray:No function)
213
Reserved
Reserved
214
Reserved
Reserved
215
Reserved
Reserved
216
* “Disabling of Duplex” in “Disabling of
Devices” is selected.
2-sided printing
* Change 2-sided printing to 1-sided printing.
* Change 2-sided printing of Covers/Inserts setting to
1-sided printing.
* Cancel “Disabling of Duplex” of “Disabling of
Devices” by the Administrator
The requested job could not be completed correctly due
to the following reason:
(2-sided printing:Prohibited) Please ask your
administrator.
217
Reserved
Reserved
218
Reserved
Reserved
219
Reserved
Reserved
21A
Reserved
Reserved
21B
Reserved
Reserved
21C
Reserved
Reserved
21D
Selected input tray is disabled.
Feed section
* Select the available input tray.
* Cancel “Optional Paper Drawer” of “Disabling of
Devices” by the Administrator
* Cancel “Disabling of ” Tray Settings" of “Disabling of
Devices” by the Administrator
* Cancel “Disabling of Inserter” of “Disabling of
Devices” by the Administrator
The requested job could not be completed correctly due
to the following reason:
(Selected input tray:Prohibited)
21E
Reserved
Reserved
21F
Selected paper size is not appropriate for
Booklet.
Paper size
* Please select the available paper size for Booklet.
The requested job could not be completed correctly due
to the following reason:
(Booklet printing:Incorrect paper size)
220
Reserved
Reserved
221
Reserved
Reserved
222
Reserved
Reserved
223
Reserved
Reserved
224
Reserved
Reserved
225
Reserved
Reserved
226
Reserved
Reserved
227
Reserved
Reserved
228
Reserved
Reserved
229
Reserved
Reserved
22A
Reserved
Reserved
22B
Reserved
Reserved
22C
Tandem Printing: Incorrect setting
parameter
Tandem printing
Please check the setting parameter of Tandem slave
machine.
The requested job could not be completed correctly due
to the following reason:
(Tandem Printing:Incorrect setting parameter)
22D
Setting error of Tandem slave machine
Tandem printing
Check the setting of Tandem slave machine, and set
up appropriately.
The requested job could not be completed correctly due
to the following reason:
(Tandem Printing: Not setting)
22E
Reserved
Reserved
22F
Reserved
Reserved
230
Reserved
Reserved
2/5
PRINTER MODE JOB LOG CODE LIST 
CODE
Cause
Item
Remedy
SMON Message
231
The selected store folder does not exist.
Retention
* Please create the store folder.
* Please specify the store folder name correctly.
The requested job could not be stored to the selected
folder due to the following reason:
(Document filing:Selected folder does not exist) The job
is stored to the default folder.
232
Since the selected folder does not exist, the
job is stored to the default folder.
Retention
* Please specify the store folder name correctly.
The requested job is printed, but could not be stored in
the selected folder due to the following reason:
(Document filing:Selected folder does not exist) The job
is stored to the default folder.
233
Inserter specifies the unavailable output tray.
Inserter/Delivery
section
Inserter is selected in “Covers/inserts settings” but
please specify the available output tray.
The requested job could not be completed correctly due
to the following reason:
(Inserter: Incorrect output tray selection)
234
Reserved
Reserved
235
Reserved
Reserved
236
Covers/Inserts" is disabled in "Disable
Setting": “Operation Settings”
Covers/inserts
printing
* Not use Covers/Inserts function.
* Cancel “Disabling of Covers/Inserts” by the
Administrator.
The requested job could not be completed correctly due
to the following reason:
(Covers/Inserts:Prohibited)
237
Password to access the folder is wrong.
DSK, Retention
Specify the correct password for folder access.
The requested job is printed, but could not be stored in
the selected folder due to the following reason:
(Document filing:Incorrect folder password) The jobis
stored to the default folder.
238
Password to access the folder is wrong.
DSK, Retention
Specify the correct password for folder access.
The requested job could not be stored in the selected
folder due to the following reason:
(Document filing:Incorrect folder password) The job is
stored to the default folder.
239
Quick File Mode is disabled.
DSK, Retention
* Not use Quick File Mode.
* Cancel “Disabling of Quick File Mode” by the
Administrator.
The requested job is printed, but could not be stored
due to the following reason:
(Disabling of Quick File Mode)
23A
Sharing Mode is disabled (stored without
entering the password).
DSK, Retention
* Store the data with entering the password.
* Cancel the disabled setting by the Administrator.
The requested job is printed, but could not be stored
due to the following reason:
(Disabling of Sharing Mode)
23B
Sharing Mode is disabled (stored with
entering the password).
DSK, Retention
* Change the setting to store without entering the
password.
* Cancel the disabled setting by the Administrator.
The requested job is printed, but could not be stored
due to the following reason:
(Disabling of Confidential Mode)
23C
Storing to the folders other than the default
folder is disabled.
DSK, Retention
* Change the setting to store the default  folder.
* Cancel the disabled setting by the Administrator.
The requested job is printed, but could not be stored
due to the following reason:
(Disabling of Storing to the selected folder)
23D
Retention function is disabled.
DSK, Retention
* Print without using Retention function.
* Cancel the disabled setting by the Administrator.
The requested job is printed, but could not be stored
due to the following reason:
(Disabling of Document Filing)
23E
Print Jobs Other Than Hold Job is disabled. DSK, Retention
* Change to Hold Print.
* Cancel the disabled setting by the Administrator.
The requested job is stored, but could not be printed
due to the following reason:
(Disabling of Print Jobs Other Than Hold Job)
23F
Print Jobs Other Than Hold Job is disabled. DSK, Retention
* Change to Hold Print.
* Cancel the disabled setting by the Administrator.
The requested job is stored to the "QuickFile" folder,
but could not be printed due to the following reason:
(Disabling of Print Jobs Other Than Hold Job)
240
Hold Print job is disabled by the
Administrator.
DSK, Retention
* Change to the normal print.
* Cancel the disabled setting by the Administrator.
The requested job is printed, but could not be stored
due to the following reason:
(Retention printing:Prohibited)
241
Offset is disabled in “Device Control”.
Offset printing
* Not use Offset
* Cancel the disabled setting by the Administrator.
The requested job could not be completed correctly due
to the following reason:
(Offset: Disabled)
242
Reserved
Reserved
243
Reserved
Reserved
244
User ID is not registered.
Account Control
* Ask the Administrator to register the User ID.
The requested job isprinted, but thefollowing
phenomenonoccurred:
(Invalid user)
245
User ID is not registered.
Account Control
* Ask the Administrator to register the User ID.
The requested job is stored, but the following
phenomenon occurred:
(Invalid user)
246
Reserved
Reserved
247
Reserved
Reserved
248
Reserved
Reserved
249
Reserved
Reserved
24A
Reserved
Reserved
24B
Only 2-sided print is approved for User
Authority settings.
User Authority
settings
* Check the User Authority, and change "Approval
Settings for 2-Sided Print".
* Ask the Administrator to change the setting to be
able to do 1sided/2-sided print with User Authority.
The requested job could not be completed correctly due
to the following reason:
(Only 2-sided print approved)
24C
Only 1-sided print is approved for User
Authority settings.
User Authority
setting
* Check the User Authority, and change "Approval
Settings for 2-Sided Print"
* Ask the Administrator to change the setting to be
able to do 1sided/2-sided print with User Authority.
The requested job could not be completed correctly due
to the following reason:
(Only 1-sided print approved)
24D
When “Allow User to Select the Print Color”
is disabled, the document control pattern
print color differed between the color
selected in System Settings and the color
selected in the driver.
Document Control
* On the driver, select the same color selected for
Document control pattern print color in System.
Color of Document control function has been changed
on the specified job by the reason below:
(Color setting of Document controlfunction: Allow User
to Select the Print Color is disabled)
Page of 13
Display

Download Sharp MX-5500N / MX-6200N / MX-7000N (serv.man134) Technical Bulletin

Here you can view online or download Sharp MX-5500N / MX-6200N / MX-7000N (serv.man134) Technical Bulletin in pdf. This Technical Bulletin can help you recover, restore, fix, disassemble and repair Sharp MX-5500N / MX-6200N / MX-7000N (serv.man134) Copying Equipment. Information contained in Sharp MX-5500N / MX-6200N / MX-7000N (serv.man134) service manual (repair manual) typically includes:

  • Disassembly, troubleshooting, programming, maintenance, remote, adjustment, installation and setup instructions.
  • Schematics, wiring and block diagrams.
  • Printed wiring boards (PWB) and printed circuit boards (PCB).
  • Parts list (bill of materials).