DOWNLOAD Sharp MX-5500N / MX-6200N / MX-7000N (serv.man66) Service Manual ↓ Size: 8.05 MB | Pages: 25 in PDF or view online for FREE

MX-7000N  FUSING SECTION  O – 4

* CAUTION. HOT

When removing the fusing unit, because the fusing unit is high
temperature, remove after it cools enough.

1)

Release the lock (A), and open the right door unit (B).
* When working, open the right door unit enough.

2)

Remove the screws (C), and pull out the fusing unit (D).

3)

Hold the part of green felts (E), and remove the fusing unit (F). 

1)

Remove the fusing unit.  (Refer to the "(1) Fusing unit".)

1

Fusing unit

1

Fusing unit

a

External thermostat main

b

External thermostat sub

MX-7000N  FUSING SECTION  O – 5

2)

Remove the screws (A). Rotate the fusing web unit (B), and
remove it.
* When installing, engage the fusing web unit (B) to the pawls

(C) of the upper cover.

* When installing, be careful to prevent bending the elec-

trodes (D), and check that the electrodes are contacted.

3)

Remove the screws (E), and remove the upper cover (F).

4)

Disconnect the connectors (H) by releasing each locks (G).
Remove the screws (I), and remove the external thermostat
main  (J), the external thermostat sub (K), and the washers (L).

1)

Remove the fusing unit.  (Refer to the "(1) Fusing unit".)

2)

Remove the screws (A). Rotate the fusing web unit (B), and
remove it.
* When installing, engage the fusing web unit (B) to the pawls

(C) of the upper cover.

* When installing, be careful to prevent bending the elec-

trodes (D), and check that the electrodes are contacted.

3)

Remove the screws (E), and remove the upper cover (F).

1

Fusing unit

c

External thermistor main

✕

 ▲

d

External thermistor sub

✕

 ▲

MX-7000N  FUSING SECTION  O – 6

4)

Remove the screw (G), and remove the clamp (H). Disconnect
the connector (I). Remove the screws (J), and remove the
mounting plates (K). Remove the screws (L), and remove the
external thermistor main (M) and the external thermistor sub
(N).

1)

Remove the fusing unit.  (Refer to the "(1) Fusing unit".)

2)

Remove the screws (A). Rotate the fusing web unit (B), and
remove it.
* When installing, engage the fusing web unit (B) to the pawl

(C) of the upper cover.

* When installing, be careful to prevent bending the elec-

trodes (D), and check that the electrodes are contacted.

3)

Remove the screws (E), and remove the upper cover (F).

1

Fusing unit

e

Upper thermostat main

f

Upper thermostat sub

MX-7000N  FUSING SECTION  O – 7

4)

Disconnect the connectors (H) by releasing each locks (G).
Remove the screws (I) and the washers (J), and remove the
thermostat main (K) and the thermostat sub (L). Remove the
washers (M).

1)

Remove the fusing unit.  (Refer to the "(1) Fusing unit".)

2)

Remove the screws (A). Rotate the fusing web unit (B), and
remove it.
* When installing, engage the fusing web unit (B) to the pawl

(C) of the upper cover.

* When installing, be careful to prevent bending the elec-

trodes (D), and check that the electrodes are contacted.

3)

Remove the screws (E), and remove the upper cover (F).

4)

Disconnect the connector (G). Remove the screw (H), and
remove the upper thermistor sub (I).

1

Fusing unit

g

Upper thermistor sub

✕

 ▲