DOWNLOAD Sharp MX-5500N / MX-6200N / MX-7000N (serv.man28) Service Manual ↓ Size: 2.55 MB | Pages: 8 in PDF or view online for FREE

MX-7000N  MX-FNX3  7 – 3

1)

Install the rail (Package part No. 5) to the finisher with the fix-
ing screws (Package part No. 1).

2)

Install the rail reception sheet metal (Package part No. 6) to
the main unit with the fixing screws (Package part No. 2).

1)

Install the connection fixture R (Package part No. 8) to the
main unit with the fixing screws (Package part No. 3).

2)

Install the connection fixture F (Package part No. 7) to the
main unit with the fixing screws (Package part No. 3).

1)

Insert the rail of the finisher into the slit on the rail reception
sheet metal of the main unit, install the finisher.

2)

Remove the screw, and remove the connector cover on rear
side of the finisher.

MX-7000N  MX-FNX3  7 – 4

3)

Check that the center of the screw hole of the finisher is in the
range of specification of an oval hole of the connection fixture
that exist on main body rear side.

* When not the range of specification, execute the following

adjustment. If the adjustment is not required, progress to the
procedure of "E. Touch of the auxiliary caster with the floor".

1)

Remove the finisher from the main unit.

2)

Remove the screws, slide to the left the front lower cover, and
remove it.

3)

Open the front upper door.

4)

Remove the screws, and open the front lower door.

5)

Remove the fixing tapes.

6)

Remove the screws, and remeve the rear lower cover.

MX-7000N  MX-FNX3  7 – 5

7)

Remove the fixing tapes.

8)

Loosen both of the caster fixing screws of the front side and
rear side.

9)

Remove the screw, and remove the spanner installed inside
the front lower door.

10) Turn the bolt for which the adjustment is necessary, and adjust

to become it within the range of specification.

11) Check to insure that the upper and lower clearances between

the main unit and the finisher are even.

MX-7000N  MX-FNX3  7 – 6

12) Tighten the caster fixing screws so that the indicator scale is

fit.

13) Install the rear lower cover with the fixing screws.

14) Install the spanner for adjustment to inside the front lower door.

15) Close the front lower door, and fix with the fixing screws.

16) Close the front upper door.

17) Attach the front lower cover with the fixing screws.

1)

Engage the finisher to the main unit.