DOWNLOAD Sharp UP-X300 (serv.man49) Service Manual ↓ Size: 2.8 MB | Pages: 127 in PDF or view online for FREE

Open guest checks can be transferred from a clerk to another clerk.  This function may be convenient at
the end of a clerk shift or whenever a clerk is relieved.  It is possible to transfer one, several or all open
tables.

The clerk who has served the table must be signed on.

Touch the [TRANSFER] key.

Select the objective tables on the graphical layout screen or open table list screen.
In case of transferring all opened tables, you do not have to select tables.

Touch the [TRANSFER] key.

Enter a clerk code to whom the opened tables are transferred, and his or her password, if
necessary.  Then touch [OK].  In case of the real clerk key system, insert his or her clerk key.

Select the objective tables on the graphical layout screen or open table list screen.
In case of transferring all opened tables, you do not have to select tables.

Touch the [TRANSFER] key.

Enter a clerk code to whom the opened tables are transferred, and his or her password, if
necessary.  Then touch [OK].  In case of the real clerk key system, insert his or her clerk key.

In case of Type 1 method is applied, key sequence, [TRANSFER] 

➞

 [TABLE #] 

➞

 Select the target

table number 

➞

 Select the clerk, is available.

You can recall data of closed tables.  All payment operations are canceled for the recalled guest checks,
and the transaction is opened again.
Following operation are available after a recall:
• To edit media type
• To correct items
• To add items
• To add tip
• To access by bill number or transaction number

Touch the [Recall] key. A recall table list will appear.

Perform an operation suitable for you.

• Select the targeted transaction line on the list.

• In order to open the window for entering a bill or transaction number, touch the [RECALL#] key.

Then enter the bill or transaction number and touch [Enter].

• Scan the barcode (bill or transaction number) printed on the bill issued for the table.

You can use the following functions by using employee codes.

Employees can be logged-on by entering employee codes, or they can be signed-on by using employee
cards.  To use an employee card, you need a magnetic card reader (MCR).

Enter your employee code and touch the [EMPLOYEE #] key, or swipe employee card.
When your password is to be entered, the following window will appear.

Enter your password, if necessary.

The default screen for the employee, which is programmed previously will be displayed.

Touch the [Exit] key to log off.

(In case of job entry menu screen)