DOWNLOAD Sharp UP-X300 (serv.man69) Service Manual ↓ Size: 19.24 KB | Pages: 1 in PDF or view online for FREE

Model
UP-X300 (serv.man69)
Pages
1 Few pages! See other manuals at the bottom of the first or last page.
Size
19.24 KB
Type
PDF
Document
Driver / Update
Brand
Device
EPOS / X300 Version Upgrade Procedure 1.5.x.x to 1.6.x.x (if you require further deatils on the CSV Upgrade Utility you can refer to X300 200 Data Conversion Utility Guide posted 09 11 06)
File
up-x300-sm69.pdf
Date
PREV: Sharp UP-X300 (serv.man68) Driver / Update

Sharp UP-X300 (serv.man69) Driver / Update ▷ View online

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
E
E
C
C
R
R
/
/
E
E
P
P
O
O
S
S
T
T
e
e
c
c
h
h
n
n
i
i
c
c
a
a
l
l
 
 
S
S
u
u
p
p
p
p
o
o
r
r
t
t
1
UP-X300
Version Upgrade
From 1.5.x.x to 1.6.x.x
Procedure
UPX300 Version 1.6 Set-up procedure from Ver.1.5.x.x.
1)  On your current it is recommended to system reset EOD sales for Daily/Periodic1/Periodic2
2)  Delete the following data TLOG/Close Transaction/Operation&EJ go to:-
      POS Programming/System Setting/Administrator/Data Delete
3)  Backup ALL data by DATA CONTROL (Not just Program Data)
4)  Shutdown Master/Backup Master/ Satellite.
5)  Please upgrade your CSV data (saved at point 3) from Ver.1.5.x.x to Ver.1.6.0.xx
(Please use Utility on the Technical WEB site)
6) 
Install Ver.1.6.0.xx software to UPX300 Master
     (Keep Current Data Base is “NO”.)
7)  After Installing the software Master Machine is shut down.
8)  Restart Master Machine.
9)  Restore ALL Data by DATA CONTROL in Master.
10) Shut down and Restart Master Machine.
11) Install Ver.1.6.0.xx software to UPX300 Backup Master
(Keep Current Data Base is “NO”.)
Important to enter the correct Terminal# and IP Address when asked, please check with settings
stored in the Master Terminal list
If entered incorrectly (i.e. number that is not in the Master list) the machine will freeze on “Update
Database…”
12) Install Ver.1.6.0.xx software to UPX300 Satellite or UPX200.
(Keep Current Data Base is “NO”.)
Important to enter the correct Terminal# and IP Address when asked, please check with settings
stored in the Master Terminal list
If entered incorrectly (i.e. number that is not in the Master list) the machine will freeze on “Update
Database…”
Please note:
* If you forget red colour procedure, your database could have a problem.
* During Installation of new version software in the Master and restoring new database
Process 6) to10) it is important to ensure other machines in the network are shut down,
(X300 and X200 terminals)
* We recommend to issue and reset sales report for the End User need. Process 1), in
case of any difficulty.
Display

Sharp UP-X300 (serv.man69) Driver / Update ▷ Download

  • DOWNLOAD Sharp UP-X300 (serv.man69) Service Manual ↓ Size: 19.24 KB | Pages: 1 in PDF or view online for FREE
  • Here you can View online or download the Driver / Update for the Sharp UP-X300 (serv.man69) in PDF for free, which will help you to disassemble, recover, fix and repair Sharp UP-X300 (serv.man69) EPOS. Information contained in Sharp UP-X300 (serv.man69) Driver / Update (repair manual) includes:
  • Disassembly, troubleshooting, maintenance, adjustment, installation and setup instructions.
  • Schematics, Circuit, Wiring and Block diagrams.
  • Printed wiring boards (PWB) and printed circuit boards (PCB).
  • Exploded View and Parts List.

Found More:

UP-X300 (serv.man69) Service Manuals

Preview DownloadPagesSize
UP-X300 (serv.man43) ER-03DWB ER-05DWB Cash Drawer service manual including parts guide Service Manual 7 198.26 KB
UP-X300 (serv.man44) UP-X200 with UP-X300 application Configuration Procedure Service Manual 14 1.83 MB
UP-X300 (serv.man45) UP-X300 Service Manual Service Manual 73 3.62 MB
UP-X300 (serv.man48) Back Office Programming Manual User Manual / Operation Manual 127 1.58 MB
UP-X300 (serv.man49) Front End Operation Manual User Manual / Operation Manual 127 2.8 MB
UP-X300 (serv.man46) ER-03DWB ER-05DWB Cash Drawer service manual including parts guide Service Manual / Parts Guide 7 198.26 KB
UP-X300 (serv.man47) UP-X300 Parts Guide Manual Service Manual / Parts Guide 18 379.57 KB
UP-X300 (serv.man41) Layouts Version 1.1 Service Manual / Specification 76.18 KB
UP-X300 (serv.man42) Documentation on how to connect Avery FX series scale to the UP-X300 series including cable specification Service Manual / Specification 3 218.76 KB
UP-X300 (serv.man110) X500 300 Touch Panel change Service Manual / Technical Bulletin 4 808.43 KB
UP-X300 (serv.man111) UP-X300 Auto Application Upgrade (Terminalfile.txt)It is possible to perform auto application version upgrades on Backup Client machines on a network. Service Manual / Technical Bulletin 1 17.44 KB
UP-X300 (serv.man112) UP-X300 Pre Installation Guide Tech Bulletin Service Manual / Technical Bulletin 2 27.78 KB
UP-X300 (serv.man113) UP-X300 Release of Power Switch Cover, to prevent accidental power off Service Manual / Technical Bulletin 1 74.23 KB
UP-X300 (serv.man114) UP-X300 Speed Performance Issues (V1.6.0.9 V1.6.0.10 Only)changes to mfull.ini file Service Manual / Technical Bulletin 1 18.83 KB
UP-X300 (serv.man115) UP-X300 Lock Out or Freezing after manual Date Change (BST) Service Manual / Technical Bulletin 1 18.97 KB
UP-X300 (serv.man116) UP-X300 Configuration Guide for interface to Sharpsoft B O (Updated to include latest required files) Service Manual / Technical Bulletin 3 381.8 KB
UP-X300 (serv.man117) UP-X200 Installation Guide Service Manual / Technical Bulletin 1 18.5 KB
UP-X300 (serv.man118) X300 500 to Wireless Hand Held terminal AP and Wireless set-up guide Service Manual / Technical Bulletin 7 477.43 KB
UP-X300 (serv.man119) UP-X300 500 RTC Battery Failure Symptons Service Manual / Technical Bulletin 1 17.46 KB
UP-X300 (serv.man120) UP-X300 X200 Version 1.4.7.0 1.0.6.0 with new O S Update Notes Service Manual / Technical Bulletin 1 19.43 KB
UP-X300 (serv.man121) X300 HDD Mapping Document. Required when using SharpSoft Back Office. Service Manual / Technical Bulletin 306.24 KB
UP-X300 (serv.man122) Date Time is reset to factory default Service Manual / Technical Bulletin 2 119.3 KB
UP-X300 (serv.man51) Release notes for printer layouts 1.0 1.1M Driver / Update 2 37.01 KB
UP-X300 (serv.man52) Standard Print Layouts for the UP-X300 Ver 1.1M(Please refer to print layout import procedure for instructions) Date added for Daily Summary report Driver / Update 88.81 KB
UP-X300 (serv.man53) Standard Print Layouts for the UP-X300 Ver 1.0M(Please refer to print layout import procedure for instructions) Date added for Daily Summary report Driver / Update 88.87 KB
UP-X300 (serv.man54) Standard Print Layouts for the UP-X300 Ver 1.1L(Please refer to print layout import procedure for instructions) Qty field added for KP Condiments Driver / Update 88.8 KB
UP-X300 (serv.man55) Application Version 1.5.0.9 with OS 1.08 (Compatible with ALL V1.5.x.x but with latest 1.08 OS, allows you to upgrade your 1.5 sites without converting data) Driver / Update 14.74 MB
UP-X300 (serv.man56) Printer Layout Release Notes Driver / Update 2 35.75 KB
UP-X300 (serv.man57) Standard Print Layouts for the UP-X300 Ver 1.0L(Please refer to print layout import procedure for instructions) Qty field added for KP Condiments Driver / Update 88.86 KB
UP-X300 (serv.man58) 1.6.0.18 Version Application (Please refer to Version History for full details of upgrades, this version will install with O S 1.08) Driver / Update 15.47 MB
UP-X300 (serv.man59) UP-X300 Version History 1.6.0.18 (This document contains all the specification changes and Bug fixes upto version 1.6.0.18) Driver / Update 15 106.4 KB
UP-X300 (serv.man60) UP-X300 Version History 1.6.0.16 (This document contains all the specification changes and Bug fixes upto version 1.6.0.16) Driver / Update 14 48.99 KB
UP-X300 (serv.man61) 1.6.0.16 Version Application. (Please refer to Version History for a complete list of fixes and enhancements posted here on 11 06 2008 Driver / Update 15.48 MB
UP-X300 (serv.man62) Printer Layouts Release notes Driver / Update 2 26.52 KB
UP-X300 (serv.man63) Standard Print Layouts for the UP-X300 Ver 1.0k(Please refer to print layout import procedure for instructions) Graphic logo now prints on sales reports Driver / Update 76.61 KB
UP-X300 (serv.man64) Version 1.1k Print Layouts for the UP-X300 (These are as Standard V1.0j with following changes - No GT's or NET1 NET2 on transaction sales report) 76.59Kb Driver / Update 76.58 KB
UP-X300 (serv.man65) Version 2 1.6.x.x This demo version is as Version 1 but has been configured for use with the X200 (Use RESTORE ALL to install for V1.6.x.x)Please refer to User Notes posted in Handy Guides section 22 02 08 Driver / Update 439.3 KB
UP-X300 (serv.man66) Version 1 1.6.x.x This is a basic demo program, the dealer could carry out additional programming for specific demonstrations) Driver / Update 455.48 KB
UP-X300 (serv.man67) Presentation 1.6.x.x This is the Sharp UK demonstration data, that is used for Training Courses. (NOT to be used as customer program)Please use RESTORE ALL to demonstrate the X300 features (There is also a Powerpoint Presentation Doc for this data, on this WEB site) Driver / Update 1.4 MB
UP-X300 (serv.man68) 1.6.0.13 Version Application. (Please refer to Version History for a complete list of fixes and enhancements posted on below 20 11 07) Driver / Update 15.5 MB
UP-X300 (serv.man70) CSV Update to 1.6.x.x (This utility is required to update BACKUP ALL data from 1.5.x.x to 1.6.x.x version) Please refer to related documentation for use. Driver / Update 214.63 KB
UP-X300 (serv.man71) UP-X300 Version History 1.6.0.13 (This document contains all the specification changes and Bug fixes upto version 1.6.0.13) Driver / Update 12 45.13 KB
UP-X300 (serv.man72) X300 Printer Layouts Revision History Driver / Update 2 25.11 KB
UP-X300 (serv.man73) Version 1.1j Print Layouts for the UP-X300 (These are as Standard V1.0j with following changes - No GT's or NET1 NET2 on transaction sales report) Driver / Update 76.59 KB
UP-X300 (serv.man74) Standard Print Layouts for the UP-X300 Ver 1.0j(Please refer to print layout import procedure for instructions) Driver / Update 76.63 KB
UP-X300 (serv.man75) UP-X300 V1.5.0.8 with Downgrade OS 1.07 At initial install please select Update OS YES at next time of Update OS please select NO ...Please use this version for all new installations until further notice Driver / Update 14.71 MB
UP-X300 (serv.man76) UP-X300 Version 1.5.0.8 with OS ver 1.08 Driver / Update 14.72 MB
UP-X300 (serv.man77) X300 Screenshot Utility. Runs on X300 only. See documentation in Handy Guides. Driver / Update 24.97 KB
UP-X300 (serv.man78) Presentation 1.5.x.x (This is the data used on support Training Courses, not to be used as basis of customer program, due to extreme use of screens etc) Driver / Update 1.4 MB
UP-X300 (serv.man79) X300 Application Version 1.5.0.6 (Please use 1.5.x.x compatable data or select use default data) Driver / Update 14.72 MB
UP-X300 (serv.man80) Revision History X300 V1.5.0.6 and X200 V1.1.0.4 Driver / Update 4 25.49 KB
UP-X300 (serv.man81) UP-X200 Application Version 1.1.0.4 (to be used with UP-X300 Version 1.5.0.6) Driver / Update 14.15 MB
UP-X300 (serv.man82) UP-X300 Sample INI files for Macro Reports (editable report.ini file for filter setting) Driver / Update 31.17 KB
UP-X300 (serv.man83) REMOTE SUPPORT NetOP HOST installation files for UP-X300, please read documentation for installation procedure. A licence is required to use this software and must be obatined before installation. Driver / Update 443.64 KB
UP-X300 (serv.man84) X300 Version 1.5.0.4 (Compatable with X200 V1.1.0.2) Please refer to X300 200 (Version 1.5.0.x)Installation Notes below. Also please see presentation notes in Handy Guide section of WEB Driver / Update 14.72 MB
UP-X300 (serv.man85) Version 2 1.5.x.x with X200 (This data is similar to Demo Data V1 but includes X200 configuration) To load please use the Program Restore feature. Driver / Update 274.2 KB
UP-X300 (serv.man86) X300 X200 Revision History upto Version 1.5.0.4 and X200 version 1.1.0.2(details enhancements and resolved issues) Driver / Update 4 24.35 KB
UP-X300 (serv.man87) UP-X300 Data Conversion Utility This utility is required to convert X300 V1.4.x.x data to Ver 1.5.x.x Please refer to Installation Notes (see WEB Below) Driver / Update 344.07 KB
UP-X300 (serv.man88) X300 200 Data Conversion Utility Guide (Please read these notes before upgrading from 1.4.x.x to version 1.5.0.x) Driver / Update 2 21.06 KB
UP-X300 (serv.man89) Note the MS7120 cable pt number shoud be 54000B Driver / Update 1.31 KB
UP-X300 (serv.man90) X300 Application Version 1.4.11.1 compatible with 1.4.7.0 existing data, if using older version data or data stored on USB please use the Restore Procedure (not Copy Paste PRESET) Driver / Update 14 MB
UP-X300 (serv.man91) Version 1.1h Print Layouts for the UP-X300 (These are as Standard V1.0h with following changes - No GT's or NET1 NET2 on transaction sales report) Please see release notes for revision history Driver / Update 76.34 KB
UP-X300 (serv.man92) Standard Print Layouts for the UP-X300 Ver 1.0h (Please refer to print layout import procedure for instructions) Please see release notes for revision history Driver / Update 76.4 KB
UP-X300 (serv.man93) X300 Printer Layouts Revision History document. Latest Split Check added to Rcpt and Bill. Total now shows on Bill Driver / Update 2 16.21 KB
UP-X300 (serv.man94) X300 Sample Room files for use with filebased PMS system. Extract the files and place them into a folder called Room Driver / Update 2.87 KB
UP-X300 (serv.man95) X300 Demo version 2 with X200 configuration (Please use the Program Restore in B O to load this data. Driver / Update 274.16 KB
UP-X300 (serv.man96) UP-X300 Basic 1 Demo data. Unzip and restore from folder. This data is to be restored using B O program restore The data is a basic customers program and could be used as a template. It is to be used with Application V1.4.7.0 or later and O S Ver 1.07 or later. A screen shot of the program is included for help with identification Driver / Update 419.04 KB
UP-X300 (serv.man97) Standard Print Layouts for the UP-X300 Ver 1.0d (Please refer to print layout import procedure for instructions) Driver / Update 76.16 KB
UP-X300 (serv.man98) Version 1.1d Print Layouts for the UP-X300 (These are as Standard V1.0d with following changes - No GT's or NET1 NET2 on transaction sales report) Driver / Update 76.17 KB
UP-X300 (serv.man99) X300 Version 1.4.7.0 Application Update. DO NOT COPY PASTE preset file when using existing data (Please refer to Tech Bulletin UP-X300 X200 Version 1.4.7.0 1.0.6.0 Update)Copy and then extract to an X300 folder. Please ensure the X300 folder is in the root of your USB insert into POS AND POWER ON Driver / Update 14.09 MB
UP-X300 (serv.man100) Windows XP patch to allow connection Windows CE Driver / Update 892.8 KB
UP-X300 (serv.man101) UP-X200 Application Version 1.0.5.1 (March 2006) Driver / Update 4.62 MB
UP-X300 (serv.man102) X300 Application Version 1.4.6.2 (Please refer to V1.4.6.2 Revision Notes) Driver / Update 8.46 MB
UP-X300 (serv.man103) X300 Application Version History (Updated Feb 2006) Driver / Update 1 34.93 KB
UP-X300 (serv.man104) UP-X300 Application Version Upgrade 1.4.0.0 Driver / Update 8.43 MB
UP-X300 (serv.man105) UPX300 Application Version Upgrade 1.2.0.0 Driver / Update 7.45 MB
UP-X300 (serv.man106) Epson TM Flash Logo Setup Utility Version 2.0.1 (for downloading a logo to Epson printers) Driver / Update 435.86 KB
UP-X300 (serv.man107) Epson TMNet WinConfig V1.0 (for assigning IP addresses to epson network printers). Driver / Update 1003.39 KB
UP-X300 (serv.man108) UP-X300 Sharp UK (Backup All) Training Demo Data Version 1.0 This data is to be used together with the Training Presentation (also available on he WEB)it contains all the features but is not practical for an installation. Please refer to the Handy guide Restoring a Backup (All) file for installation Driver / Update 1.4 MB
UP-X300 (serv.man109) UP-X300(HD2 PRESET FOLDER) Training Demo Data Version 1.0 This data is to be used together with the Training Presentation (also available on he WEB)it contains all the features but is not practical for an installation. Driver / Update 3.83 MB
UP-X300 PMS Proceedure Handy Guide 9 864.56 KB
UP-X300 (serv.man2) Star TSP-654 printer guide Handy Guide 3 892.61 KB
UP-X300 (serv.man3) Documentation on how to connect a Bizerba scale to UPX300 series including cable specification Handy Guide 3 198.28 KB
UP-X300 (serv.man4) Documentation on how to connect Avery FX series scale to the UP-X300 series including cable specification Handy Guide 3 218.76 KB
UP-X300 (serv.man5) TM-U230 Buzzer support for X300. Handy Guide 1 30.33 KB
UP-X300 (serv.man6) RecoverPWFail.bat Handy Guide 176 B
UP-X300 (serv.man7) RecoverPWFail.bat documentation. Handy Guide 1 31.29 KB
UP-X300 (serv.man8) X300 FTP configuration to use with Sharpsoft across LAN or Broadband WAN. Handy Guide 11 907.59 KB
UP-X300 (serv.man9) Recovershutdown.bat documentation... Handy Guide 1 30.52 KB
UP-X300 (serv.man10) RecoverShutdown.bat This batch file will automatically restore the shutdown.dat file in the event of a power failure. Please follow the installation instructions. Handy Guide 193 B
UP-X300 (serv.man11) Demo Data Version 2 1.6.x.x User Notes Handy Guide 1 18.14 KB
UP-X300 (serv.man12) X300 Online configuration with Sharpsoft. Handy Guide 4 384.36 KB
UP-X300 (serv.man13) X300 Macro Report Job Number Table (List of Sales Report job numbers when creating macro key report) Handy Guide 9 129.45 KB
UP-X300 (serv.man14) Procedure for downgrading OS 1.08 to 1.07 Handy Guide 1 34.38 KB
UP-X300 (serv.man15) Procedure for downgrading 1.6.x.x data to 1.5.x.x ready for restore. Handy Guide 1 69.2 KB
UP-X300 (serv.man16) UP-X300 200 Installations, Best Practices Guide (Please familiarise with these details when preparing installation and troubleshooting) Handy Guide 1 18.77 KB
UP-X300 (serv.man17) X300 Screenshot Utility documentation. Handy Guide 1 93.69 KB
UP-X300 (serv.man18) UP-X300 Remote Support Facility (NetOp)Installation Guide. Licences now purchased from BNS Distribution, contact details within document. Handy Guide 7 537.48 KB
UP-X300 (serv.man19) X300 X200 Feature Enhancement-2 (Contains setup and operational details on the new enhancements released for 1.6.x.x 1.2.0.9 Handy Guide 23 2.56 MB
UP-X300 (serv.man20) X300 to Logwood KVM configuration guide. A PC will be needed on the same network Handy Guide 5 716.21 KB
UP-X300 (serv.man21) X300 with X200 set up guide (Brief explanation to set up an already configured X300 with an X200 using X300 Demo Version 2 program (also on Web) Handy Guide 1 18.62 KB
UP-X300 (serv.man22) UP-X300 Documented Guide on editing INI file when setting filters on Macro Report Key Handy Guide 3 46.25 KB
UP-X300 (serv.man23) Guide on how to image a 256Mb CF Card for use in X300. INCLUDES RESTORE FEATURE FOR HD3 Handy Guide 5 98.07 KB
UP-X300 (serv.man24) Guide on how to image a 256Mb CF Card for use in X300 Handy Guide 1 40.46 KB
UP-X300 (serv.man25) X300 X200 Feature Enhancement Presentation (Contains details on the five new enhancements released in version 1.5.0.4) Handy Guide 39 6.37 MB
UP-X300 (serv.man26) UP-X300 Bar Code Scanner Setup Handy Guide 1 34.27 KB
UP-X300 (serv.man27) X300 Program Mode PLU Print Out user notes Handy Guide 1 18.01 KB
UP-X300 (serv.man28) X300 Program Mode PLU print out Utility This program will convert PLU Program data taken from X300 into CSV format ready for simple print out at PC Handy Guide 230.22 KB
UP-X300 (serv.man29) UP-X300 Mag Card Guide (explains procedure to create Mag Cards for the UP-X300 Handy Guide 1 27.65 KB
UP-X300 (serv.man30) UP-X300 X500 to X200 HHT with AP. Wireless Network set up Guide Handy Guide 7 477.46 KB
UP-X300 (serv.man31) User notes for the X300 Demo Version 2 with X200 program data (refer to WEB site) Handy Guide 1 17.94 KB
UP-X300 (serv.man32) UP-X300 Backup Restore Function. briefly explains the procedure to Backup or Restore data through the Data Control function Handy Guide 1 90.29 KB
UP-X300 (serv.man33) X300 Feature Awareness Updates (Consolidated Stock Report when using Modifiers) Handy Guide 1 29.56 KB
UP-X300 (serv.man34) X300 Feature Awareness Update- Individual Person Ordering Payment on a Table Handy Guide 1 29.43 KB
UP-X300 (serv.man35) X300 Promotions Guide. The Guide details how to set up and use the many different types of Promotions that are available on the X300 Handy Guide 20 324.29 KB
UP-X300 (serv.man36) UP-X300 Training Study guide Handy Guide 30 894.08 KB
UP-X300 (serv.man37) UP-X300 Printer layouts from demo version installation instructions. Handy Guide 2 172.33 KB
UP-X300 (serv.man38) UP-X300 Restoring using HD2 Preset folder Handy Guide 1 45.72 KB
UP-X300 (serv.man39) UP-X300 Restoring a Backup (All) file. Handy Guide 2 67 KB
UP-X300 (serv.man40) UP-X300 Main Features Presentation Handy Guide 64 5.84 MB
UP-X300 (serv.man50) Updated 7 7 FAQ 38 247.32 KB
UP-X300 (serv.man123) UP-X300 Brochure Brochure 2 1.2 MB

RANDOM: