Sharp UP-X300 (serv.man49) User Manual / Operation Manual ▷ View online
88
3.
Enter the customer’s name and address, then touch [OK].
4.
Make item entries.
NOTE
When entering a wrong customer code, you can cancel the operation by following two methods.
• When no item is registered: Touch the [Nosale] key.
• When an item is registered: Operate “subtotal void”.
• When no item is registered: Touch the [Nosale] key.
• When an item is registered: Operate “subtotal void”.
2.
Enter a customer code (max. 13 digits), swipe a customer card or scan a barcode(should be 13
digits EAN code/flag code 08). The following window will appear.
digits EAN code/flag code 08). The following window will appear.
89
To recall a customer information by entering the customer code
1.
Touch the [CUST] key. The customer code entry window will appear.
2.
Enter a customer code, swipe a customer card or scan a barcode. The customer name will
appear on the receipt window (bottom line).
appear on the receipt window (bottom line).
3.
Make item entries.
NOTE
When entering a wrong customer code, you can cancel the operation by following two methods.
• When no item is registered: Touch the [Nosale] key.
• When an item is registered: Operate “subtotal void”.
• When no item is registered: Touch the [Nosale] key.
• When an item is registered: Operate “subtotal void”.
To recall a customer information by looking up by name
1.
Touch the [CUST] key. The customer code entry window will appear.
90
2.
Touch [Enter] without entering any code. The following window will appear.
3.
Enter the name (the first name in case of David Brown) of a customer, and touch [OK]. The
customer list will appear.
customer list will appear.
4.
Select a target customer, and touch [Enter] to start item registration for the customer.
91
12
Guest Control
Your POS terminal manages guests using tables. A group of tables are viewed and managed as a
room, and a group of rooms are controlled by a revenue center. Transaction data is consolidated by
each revenue center.
You can view the tables in a room on the graphical table layout screen. Touch the [TABLE LAYOUT]
key to display a table layout screen.
room, and a group of rooms are controlled by a revenue center. Transaction data is consolidated by
each revenue center.
You can view the tables in a room on the graphical table layout screen. Touch the [TABLE LAYOUT]
key to display a table layout screen.
NOTE
The default room displayed may vary depending on clerks, and also tables that can be managed may
be limited depending on clerks, since tables that a clerk is in charge of may vary.
Depending on programming, the sections you are in charge of may be displayed using a specific color.
be limited depending on clerks, since tables that a clerk is in charge of may vary.
Depending on programming, the sections you are in charge of may be displayed using a specific color.
Room-1
Indoor
Room-2
Teras
Teras
Revenue Center-2
Bar
Bar
Revenue Center-1
Dining
Dining
Click on the first or last page to see other UP-X300 (serv.man49) service manuals if exist.