DOWNLOAD Sharp MX-3500N / MX-3501N / MX-4500N / MX-4501N (serv.man20) Service Manual ↓ Size: 2.72 MB | Pages: 127 in PDF or view online for FREE

The procedures for entering the product keys of the expansion kits are explained below. Touch the [Product Key] key 
and configure the settings.

Enter the product key for using the machine as a 
PostScript compatible printer.
Enter the product key with the numeric keys and touch 
the [Enter] key.

Enter the product key for using the machine as an 
Internet fax.
Enter the product key with the numeric keys and touch 
the [Enter] key.

Enter the product key for using Status Message /Alert 
Message on the machine.
Enter the product key with the numeric keys and touch 
the [Enter] key.

Enter the product key to enable linked machine - PC 
application processing.
Enter the product key with the numeric keys and touch 
the [Enter] key.

This displays the serial number that is required to obtain 
the product key.

• Depending on the peripheral devices installed, it may not be possible to use some settings.

• For the product key to be entered, contact your dealer.

When the facsimile expansion kit is installed, this is 
displayed as "E-mail Status".

The current system settings can be stored, previously stored system settings can be called up, and the factory default 
system settings can be restored. Touch the [Storing/Calling of system settings] key and configure the settings.

This is used to return the system settings to the factory 
default settings. If you wish to create a record of the 
current settings before restoring the factory default 
settings, print the current settings using "

" (page 117) in the system settings 

(administrator).

This is used to store the currently configured system 
settings. The stored settings will be retained even if the 
[POWER] key (

) is turned off. To call up the stored 

settings, use "

" which is explained 

below.
Items not stored

• Network Settings: These are not stored as unexpected 

settings may cause damage to the 
network.

• Product Keys: Product Keys are not stored as reissue 

of keys may be necessary.

This is used to call up and restore settings that were 
stored using "

The current settings will change to the settings called up 
from memory.

After executing this function, exit the system settings, 
turn off the [POWER] key (

), wait a brief interval, 

and then turn the [POWER] key (

) back on to 

make the factory default settings take effect.

MX4500-GB-SYS-Z4

MX-3500N
MX-3501N
MX-4500N
MX-4501N

MX-2300N
MX-2700N

MODEL:

MX4500-GB-SYS-Z4

MX-3500N
MX-3501N
MX-4500N
MX-4501N

MX-2300N
MX-2700N

MODEL: