DM-2000 (serv.man91). Developer Unit Improvement To Correct Clearance Between MX Roller Shaft And Shaft Bearing. (WHITE) — Sharp Copying Equipment Technical Bulletin (repair manual)

Model
DM-2000 (serv.man91)
Pages
2 Few pages! See other manuals at the bottom of the first or last page.
Size
89.22 KB
Type
PDF
Document
Technical Bulletin
Brand
Device
Copying Equipment / Developer Unit Improvement To Correct Clearance Between MX Roller Shaft And Shaft Bearing. (WHITE)
File
dm-2000-sm91.pdf
Date

View Sharp DM-2000 (serv.man91) Technical Bulletin online

STE025
Sharp Electronics (UK) Ltd., Technical Services Group
Date:
17 May 2000
Model: DM2000
Ref.:
057
Colour: White
Page:
1 of 2
DEVELOPER UNIT IMPROVEMENT TO CORRECT
CLEARANCE BETWEEN MX ROLLER SHAFT AND SHAFT
BEARING
1.Model Name:
AR161/200/205 series, DM2000 series
2.General:
We have found that there is a possibility that the above listed models produced in May of
1999 and earlier may cause the DV shaft bearing dislocation and/or developer leakage
because the DV shaft bearing was not press-fitted properly in the production process. The
DV shaft bearing was not press-fitted properly because there was a thrust clearance
between MX roller shaft and the shaft bearing. This Technical Report explains the
corrective action for the problem.
3.Corrective
   Action:
Add two (2) polyslider (0.5t) between the DV shaft bearing and the DV gear.
Polyslider: LX-WZ0117FCZZ
Important
* The DV gear must be replaced (as the gear holding pawl will be deformed when
removing).  Make sure that the DV shaft bearing is not dislocated from the installation
position. If dislocated, be sure to push it as far as it will go.
4.Affected lot:
The developer units produced in May of 1999 and earlier require this action.  Such
developer units have the following serial numbers.
(1) Developer units produced in 1998 (having an "8" as the 1
st
 digit in its serial number)
8xxxxxxx
(2) Developer units produced in May of earlier of 1999
TECHNICAL BULLETIN
STE025
Sharp Electronics (UK) Ltd., Technical Services Group
(having a "9" or a "B9" as the 1
st
 digit and a "5", "4", "3", "2" of "1" as the last digit in its
serial number)
9xxxxxx5, 9xxxxxx4, 9xxxxxx3,
9xxxxxx2, 9xxxxxx1,
B9xxxxx5, B9xxxxx4, B9xxxxx3,
B9xxxxx2, B9xxxxx1
5.Permanent
Action:
The location of the E-ring indentation on the MX roller has been changed at the end of
May of 1999 in order to prevent the MX shaft bearing from being dislocated.
STE025
Sharp Electronics (UK) Ltd., Technical Services Group
(having a "9" or a "B9" as the 1
st
 digit and a "5", "4", "3", "2" of "1" as the last digit in its
serial number)
9xxxxxx5, 9xxxxxx4, 9xxxxxx3,
9xxxxxx2, 9xxxxxx1,
B9xxxxx5, B9xxxxx4, B9xxxxx3,
B9xxxxx2, B9xxxxx1
5.Permanent
Action:
The location of the E-ring indentation on the MX roller has been changed at the end of
May of 1999 in order to prevent the MX shaft bearing from being dislocated.
STE025
Sharp Electronics (UK) Ltd., Technical Services Group
(having a "9" or a "B9" as the 1
st
 digit and a "5", "4", "3", "2" of "1" as the last digit in its
serial number)
9xxxxxx5, 9xxxxxx4, 9xxxxxx3,
9xxxxxx2, 9xxxxxx1,
B9xxxxx5, B9xxxxx4, B9xxxxx3,
B9xxxxx2, B9xxxxx1
5.Permanent
Action:
The location of the E-ring indentation on the MX roller has been changed at the end of
May of 1999 in order to prevent the MX shaft bearing from being dislocated.
STE025
Sharp Electronics (UK) Ltd., Technical Services Group
(having a "9" or a "B9" as the 1
st
 digit and a "5", "4", "3", "2" of "1" as the last digit in its
serial number)
9xxxxxx5, 9xxxxxx4, 9xxxxxx3,
9xxxxxx2, 9xxxxxx1,
B9xxxxx5, B9xxxxx4, B9xxxxx3,
B9xxxxx2, B9xxxxx1
5.Permanent
Action:
The location of the E-ring indentation on the MX roller has been changed at the end of
May of 1999 in order to prevent the MX shaft bearing from being dislocated.

Download Sharp DM-2000 (serv.man91) Technical Bulletin

Here you can view online or download Sharp DM-2000 (serv.man91) Technical Bulletin in pdf. This Technical Bulletin can help you recover, restore, fix, disassemble and repair Sharp DM-2000 (serv.man91) Copying Equipment. Information contained in Sharp DM-2000 (serv.man91) service manual (repair manual) typically includes:

  • Disassembly, troubleshooting, programming, maintenance, remote, adjustment, installation and setup instructions.
  • Schematics, wiring and block diagrams.
  • Printed wiring boards (PWB) and printed circuit boards (PCB).
  • Parts list (bill of materials).