DOWNLOAD Sharp DM-2000 (serv.man135) Service Manual ↓ Size: 26.12 KB | Pages: 1 in PDF or view online for FREE

DCE045

Sharp Electronics (UK) Ltd., Technical Services Group

TECHNICAL BULLETIN

AR161/200

1.  The diameter of the spring pin is smaller than the shaft hole, taking into

consideration the workability when fixing the spring to the separator drive shaft of
discharge unit.  As a result, vibration may occur when the separator tray goes down.
Therefore, the diameter of the spring pin is increased to fill the gap between it and
the shaft hole.

2.  To improve the productivity, the shape of separator lever R has been changed.
3.  Since the FULL detection lever of the separator tray for FAX/printer may not detect

the full state, the shape of the FULL detection lever has been changed.

1

Separator drive shaft

NSFTZ0025QSZZ

NSFTZ0025QSZ1

Diameter of holes

φ

2.3 

→

 

φ

2.5

1

Spring pin

XPSSJ20-10000

LPINS0001QSZZ

φ

2 - 10 

→

 

φ

2.5 x 8

2

Separator lever R

MLEVP0027QSZZ

MLEVP0027QSZ1

-

3

FULL detection lever

MLEVP0029QSZZ

MLEVP0029QSZ1

-

1)  Japan: Form January 1999 production.
2)  China:

From June 1999 production

3)  From July 1999 production.
4)  From June 1999 production.

Current Parts

New Parts

Ref

No.

Model

name

Version

P/G No.

Parts code

Parts code

Price

rank

Parts name

Effec-

tive

time

Interc-

hange-

ability

Note

[14] –24

NSFTZ0025QSZZ

NSFTZ0025QSZ1

AM

Separator drive shaft

1

[14] –20

XPSSJ20-10000

LPINS0001QSZZ

AA

Spring pin

*

3

2

[14] –26

MLEVP0027QSZZ

MLEVP0027QSZ1

AD

Separator lever R

‘99/7

1

3

AR161
AR200

All

[14] -27

MLEVP0029QSZZ

MLEVP0029QSZ1

AF

FULL detection lever

‘99/6

3

<Interchange>
1. Interchangeable.

4. Not interchangeable.

2. Current type can be used in place of new type.
   New type cannot be used in place of current type.

5. Interchangeable if replaced with same types of related parts in used.

3. Current type cannot be used in place of new type.
   New type can be used in place of current type.

6. Others.

Parts marked with “        ” is important for maintaining the safety of the set.  Be sure to replace these parts with specified ones for maintaining the
safety and performance of the set.