DM-2000 (serv.man11). DM2000-Operation Manual Part2 — Sharp Copying Equipment User Guide / Operation Manual

Model
DM-2000 (serv.man11)
Pages
10
Size
406.13 KB
Type
PDF
Document
User Guide / Operation Manual
Brand
Device
Copying Equipment / DM2000-Operation Manual Part2
File
dm-2000-sm11.pdf
Date

View Sharp DM-2000 (serv.man11) User Guide / Operation Manual online

27
ST
A
TUS
INDICA
T
ORS
1
Open the bypass tray. Lift slightly on the side cover
and slide the cover out until it stops.
2
Push gently on both sides of the front cover to open the
cover.
3
Lift the TD cartridge lock release lever and pull the
cartridge out until the green strap handle can be grasped
by the right hand. Lift the cartridge by the handle while
supporting it with the left hand at the green label position
to remove it.
For disposal of the old TD cartridge, contact your dealer.
4
Remove the new TD cartridge from the bag. Hold the
cartridge on both sides and shake it horizontally four or
five times.
TD CARTRIDGE REPLACEMENT
If the machine detects an insufficient amount of toner being added, copying
will stop and the machine will add toner. During this time the START (
)
key indicator will blink. When sufficient toner has been added the indicator
will remain on steadily indicating that copying can be resumed. However,
if toner addition continues for a maximum of two minutes, the TD cartridge
replacement required (
) indicator will light up in addition to the START
(
) key being lighted steadily. This indicates that the toner supply is low
and a new cartridge will be needed soon. If copying is continued, the copies
will gradually become lighter until the copier stops and the TD cartridge
replacement required (
) indicator begins to blink, indicating that the
cartridge must be replaced. Replace the TD cartridge by following the
procedure below.
For best copying results, be sure to use only
SHARP products.
The package of SHARP toner has the Genuine
Supplies label.
 TD cartridge replacement
TD cartridge lock 
release lever
4 or 5 times
GENUINE SUPPLIES
28
ST
A
TUS
INDICA
T
ORS
 TD cartridge replacement
TD CARTRIDGE REPLACEMENT
5
Remove the protective cover from the TD cartridge by
unlatching three cover hooks from the holes on the
cartridge and then pulling the cover in the direction
indicated by the arrow in the illustration.
6
Gently insert the TD cartridge along the guides until it
locks in place.
If dirt or dust is adhered to the TD cartridge, remove it
before installing the cartridge.
7
Close the front cover by pushing both sides with your
hands and then close the side cover by pressing the
handle on the cover. The 
 indicator will go out.
When closing the covers, be sure to close the front
cover securely and then close the side cover. If the
covers are closed in the wrong order, the covers may
be damaged.
29
ST
A
TUS
INDICA
T
ORS
1
Open the bypass tray. Lift slightly on the side cover
and slide the cover out until it stops.
2
Push gently on both sides of the front cover to open the
cover.
3
Lift the TD cartridge lock release lever and pull the
cartridge out until the green strap handle can be grasped
by the right hand. Lift the cartridge by the handle while
supporting it with the left hand at the green label position
to remove it.
4
Grasp the handle of the drum cartridge and gently pull
the cartridge out.
For disposal of the old drum cartridge, contact your dealer.
DRUM CARTRIDGE REPLACEMENT
The useful life of the drum cartridge is approximately 30,000 copies. When
the internal counter reaches approximately 29,000 copies, the drum
replacement required (
) indicator will light up indicating that replacement
of the drum cartridge will be needed soon. When the indicator begins to blink,
replace the drum cartridge by following the procedure given below.
Do not remove the protective cover on the drum portion
(black paper) of a new drum cartridge before use. The
cover protects the drum against external light.
For the procedure to find out how many more copies can be made before
the 30,000 mark is reached, see page 72, DRUM CARTRIDGE LIFE.
 Drum cartridge replacement
TD cartridge lock 
release lever
For best copying results, be sure to use only
SHARP products.
The package of SHARP drum cartridge has the
Genuine Supplies label.
GENUINE SUPPLIES
30
ST
A
TUS
INDICA
T
ORS
DRUM CARTRIDGE REPLACEMENT
 Drum cartridge replacement
5
Remove the new drum cartridge from the protective bag
and gently insert the lead end of the drum cartridge
along the guides.
Do not touch the surface of the drum (green portion) of
the cartridge. Doing so may cause smudges on the
copies.
6
Remove the protective cover from the drum cartridge
and then push the cartridge all the way into the copier.
7
Gently install the TD cartridge. To install the TD cartridge,
see page 27, TD CARTRIDGE REPLACEMENT.
8
Close the front cover by pushing both sides with your
hands and then close the side cover by pressing the
handle on the cover. The drum replacement required
(
) indicator will go out.
When closing the covers, be sure to close the front
cover securely and then close the side cover. If the
covers are closed in the wrong order, the covers may
be damaged.
Page of 10
Display

Download Sharp DM-2000 (serv.man11) User Guide / Operation Manual

Here you can view online or download Sharp DM-2000 (serv.man11) User Guide / Operation Manual in pdf. This User Guide / Operation Manual can help you recover, restore, fix, disassemble and repair Sharp DM-2000 (serv.man11) Copying Equipment. Information contained in Sharp DM-2000 (serv.man11) service manual (repair manual) typically includes:

  • Disassembly, troubleshooting, programming, maintenance, remote, adjustment, installation and setup instructions.
  • Schematics, wiring and block diagrams.
  • Printed wiring boards (PWB) and printed circuit boards (PCB).
  • Parts list (bill of materials).