DOWNLOAD Sharp DM-2000 (serv.man119) Service Manual ↓ Size: 114.22 KB | Pages: 2 in PDF or view online for FREE

Model
DM-2000 (serv.man119)
Pages
2 Few pages! See other manuals at the bottom of the first or last page.
Size
114.22 KB
Type
PDF
Document
Service Manual / Technical Bulletin
Brand
Device
Copying Equipment / 1.Change Of Harness Treating Method. 2.Shape Change Of Separator Lever F. (WHITE)
File
dm-2000-sm119.pdf
Date

Sharp DM-2000 (serv.man119) Service Manual / Technical Bulletin ▷ View online

DCE106
Sharp Electronics (UK) Ltd., Technical Services Group
Date:
28 January 2000
Model: DM2000
Ref.:
029
Colour: White
Page:
1 of 2
TECHNICAL BULLETIN
1. CHANGE OF HARNESS TREATING METHOD.
2. SHAPE CHANGE OF SEPARATOR LEVER F.
 1.Change of harness treating method.   
1. Model Name:
AR161/200/205 Series, DM2000 Series
2. General:
If the treatment of the harnesses around the MCU PWB is insufficient, it is difficult to
mount the electronic sort board. Therefore, the harness treating method has been
changed to improve the serviceability.
3. Description:
The harness is bound with a tie band. (5 places; see figure below.)
(1)  Pass the low-voltage power supply harness through the wiring duct.
(2)  Pass it over the main motor cable.
(3)  Pass the earth lead of the interface harness for the 2nd cassette through the duct.
(4)  Pass the FAN cable (CN23/24) and JSP lower limit sensor harness (CN37) over the
tray PWB harness (CN25).
DCE106
Sharp Electronics (UK) Ltd., Technical Services Group
4. Action:
From the middle of production in September 1999
 2.Shape change of separator lever F   
1. Model Name
AR161/200/205, DM2000
2. General
When operating the job separator tray, it may touch the rib on the front exterior.
Therefore, the shape of the separator lever F has been changed.
3. Description
Parts name
Current parts
New parts
Separator lever F
MLEVP0028QSZZ
MLEVP0028QSZ1
4. Action
From the middle of production in July 1999
Current parts
New parts
Model
name
Version
P/G
No.
Parts code
Parts code
Price
rank
Parts name
Effec-
tive
time
Inter-
change-
ability
Note
AR161
AR200
AR205
DM2000
Series
All
14 -19
MLEVP0028QSZZ
MLEVP0028QSZ1
AD
Separator lever F
Mid-
'99/7
3
<Interchange>
1. Interchangeable.
4. Not Interchangeable.
2. Current type can be used in place of new type.
New type cannot be used in place of current type.
5. Interchangeable if replaced with same types of related
parts in use.
3. Current type cannot be used in place of new type.
New type can be used in place of current type.
6. Others.
Parts marked with " 
" is important for maintaining the safety of the set. Be sure to replace these parts with specified ones
for maintaining the safety and performance of the set.
Display

Sharp DM-2000 (serv.man119) Service Manual / Technical Bulletin ▷ Download

  • DOWNLOAD Sharp DM-2000 (serv.man119) Service Manual ↓ Size: 114.22 KB | Pages: 2 in PDF or view online for FREE
  • Here you can View online or download the Service Manual / Technical Bulletin for the Sharp DM-2000 (serv.man119) in PDF for free, which will help you to disassemble, recover, fix and repair Sharp DM-2000 (serv.man119) Copying Equipment. Information contained in Sharp DM-2000 (serv.man119) Service Manual / Technical Bulletin (repair manual) includes:
  • Disassembly, troubleshooting, maintenance, adjustment, installation and setup instructions.
  • Schematics, Circuit, Wiring and Block diagrams.
  • Printed wiring boards (PWB) and printed circuit boards (PCB).
  • Exploded View and Parts List.