DM-2000 (serv.man3). DM2000 Service Manual-General Specifications — Sharp Copying Equipment Service Manual (repair manual)

Model
DM-2000 (serv.man3)
Pages
12
Size
179.37 KB
Type
PDF
Document
Service Manual
Brand
Device
Copying Equipment / DM2000 Service Manual-General Specifications
File
dm-2000-sm3.pdf
Date

View Sharp DM-2000 (serv.man3) Service Manual online

CODE: 00ZDM2000/A1E
NETWORK LASER
SYSTEM
MODEL
DM-2000
[ 1 ] GENERAL  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  1  -  1
[ 2 ] SPECIFICATIONS  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  2  -  1
[ 3 ] CONSUMABLE  PARTS  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  3  -  1
[ 4 ] EXTERNAL  VIEWS  AND  INTERNAL  STRUCTURES  .  .  .  4  -  1
[ 5 ] UNPACKING  AND  INSTALLATION  .  .  .  .  .  .  .  .  .  .  .  .  .  5  -  1
[ 6 ] ADJUSTMENTS .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  6  -  1
[ 7 ] SIMULATIONS  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  7  -  1
[ 8 ] FLASH  ROM  VERSION  UP  PROCEDURE  .  .  .  .  .  .  .  .  .  8  -  1
[ 9 ] TROUBLE  CODE  LIST  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  9  -  1
[10] USER  SETUP .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  10  -  1
[11] DISASSEMBLY  AND  ASSEMBLY  .  .  .  .  .  .  .  .  .  .  .  .  .  11  -  1
[12] ELECTRICAL  SECTION  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  12  -  1
CONTENTS
Parts marked with “  ” are important for maintaining the safety of the set. Be sure to replace these parts with specified
ones for maintaining the safety and performance of the set.
SHARP CORPORATION
DM-2000
Warning!
This product is a class A product.
If it is operated in households, offices or similar surroundings, it
can produce radio interferences at other appliances, so that the
user has to take adequate countermeasures.
CAUTION
VORSICHT
ADVARSEL
ADVERSEL
VARNING
VARO!
INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCKS DEFEATED.
AVOID EXPOSURE TO BEAM.
UNSICHTBARE LASERSTRAHLUNG WENN ABDECKUNG GEÖFFNET UND
SICHERHEITSVERRIEGELUNG ÜBERERÜCKT. NICHT DEM STRAHL AUSSETZEN.
USYNLIG LASERSTRÅLING VED ÅBNING, NÅR SIKKERHEDSAFBRYDERE ER 
UDE AF FUNKTION. UNDGA UDSAETTELSE FOR STRÅLING.
USYNLIG LASERSTRÅLING NÅR DEKSEL ÅPNES OG SIKKERHEDSLÅS BRYTES. 
UNNGÅ EKSPONERING FOR STRÅLEN.
OSYNLIG LASERSTRÅLNING NÄR DENNA DEL ÄR ÖPPNAD OCH SPÄRRAR ÄR 
URKOPPLADE. STRÅLEN ÄR FARLIG. BETRAKTA EJ STRÅLEN.
AVATTAESSA JA SUOJALUKITUS OHITETTAESSA OLET ALTTIINA NÄKYMÄTÖNTÄ
LASERSÄTEILYLLE. ÄLÄ KATSO SÄTEESEEN.
Laserstrahl
CLASS 1
LASER PRODUCT
LASER KLASSE 1 
Disconnect the AC cord before servicing the unit.
CLASS 1 LASER PRODUCT
LASER KLASSE 1
LUOKAN 1 LASERLAITE
KLASS 1 LASERAPPARAT
VAROITUS!
LAITTEEN KÄYTTÄMINEN
MUULLA KUIN TÄSSÄ
KÄYTTÖOHJEESSA MAINITULLA
TAVALLA SAATTAA ALTISTAA
KÄYTTÄJÄN
TURVALLISUUSLUOKAN 1
YLITTÄVÄLLE
NÄKYMÄTTÖMÄLLE
LASERSÄTEILYLLE.
VARNING
OM APPARATEN ANVÄNDS PÅ
ANNAT SÄTT  ÄN I DENNA
BRUKSANVISNING
SPECIFICERATS, KAN
ANVÄNDAREN UTSÄTTAS FÖR
OSYNLIG LASERSTRÅLNING,
SOM  ÖVERSKRIDER GRÄNSEN
FÖR LASERKLASS 1.
DM-2000
CONTENTS
[1] GENERAL
 ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅1  –  1
1. System configuration
 ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ 1 – 1
2. Note for servicing
 ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ 1 – 1
[2] SPECIFICATIONS
 ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅2  –  1
1. Copy mode
 ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ 2 – 1
2. Specifications of printer section
 ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ 2 – 3
[3] CONSUMABLE PARTS
 ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅3  –  1
1. Supply system table
 ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ 3 – 1
2. Environment conditions
 ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ 3 – 1
3. Production number identification
 ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ 3 – 2
[4] EXTERNAL VIEWS AND INTERNAL
STRUCTURES
 ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅4  –  1
1. Appearance
 ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ 4 – 1
2. Internal
 ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ 4 – 1
3. Operation Section
 ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ 4 – 2
4. Motor, solenoid, clutch
 ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ 4 – 3
5. Sensor, switch
 ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ 4 – 4
6. PWB unit
 ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ 4 – 5
7. Cross sectional view
 ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ 4 – 6
[5] UNPACKING AND INSTALLATION
 ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅5  –  1
1. Installing conditions
 ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ 5 – 1
2. Removal of protective material and
fixing screw
 ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ 5 – 1
3. Installing of developing cartridge
 ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ 5 – 1
4. Removal and storage of fixing screw
 ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ 5 – 2
5. Changing the copy paper size in the tray
 ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ 5 – 2
6. Installing the printer driver
 ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ 5 – 3
7. Expansion memory installation
 ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ 5 – 7
8. Print server card installation
 ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ 5 – 7
[6] ADJUSTMENTS
 ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅6  –  1
1. Adjustment item list
 ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ 6 – 1
2. Copier adjustment
 ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ 6 – 1
[7] SIMULATIONS
 ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅7  –  1
1. Entering the simulation mode
 ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ 7 – 1
2. Cancelling the simulation mode
 ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ 7 – 1
3. List of simulations
 ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ 7 – 1
4. Contents of simulations
 ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ 7 – 2
[8] FLASH ROM VERSION UP PROCEDURE
 ⋅ ⋅8  –  1
1. MCU/E SORT
 ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ 8 – 1
2. Printer control PWB firmware version up
 ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ 8 – 2
[9] TROUBLE CODE LIST
 ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅9  –  1
1. Trouble code list
 ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ 9 – 1
2. Details of trouble codes
 ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ 9 – 2
[10] USER SETUP
 ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅10  –  1
1. List of user programs
 ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ 10 –  1
2. Setting the user programs
 ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ 10 –  1
3. Configuration setting
 ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ 10 –  4
4. Configuration report and test page
 ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ 10 –  6
[11] DISASSEMBLY AND ASSEMBLY
 ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅11  –  1
1. High voltage section
 ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ 11 –  1
2. Optical section
 ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ 11 –  1
3. Fusing section
 ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ 11 –  2
4. Paper exit section
 ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ 11 –  5
5. MCU/Mother board/Printer control PWB
 ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ 11 –  6
6. Optical frame unit
 ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ 11 –  7
7. LSU
 ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ 11 –  8
8. Tray paper feed section/Paper transport
section
 ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ 11 –  8
9. Second Tray section
 ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ 11  – 10
10. Manual multi paper feed section
 ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ 11  – 11
11. Power section
 ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ 11  – 13
[12] ELECTRICAL SECTION
 ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅12  –  1
1. Block diagram
 ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ 12 –  1
2. Actual wiring diagram
 ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ ⋅ 12 –  2
DM-2000
[1] GENERAL
1. System configuration
A number of options are available for the DM System which allow you
to configure the system to meet your particular needs. The options in-
clude the following.
2. Note for servicing
Pictogram
This Service Manual uses some pictographs to assure safe operation.
Please understand the meanings of pictographs before servicing.
    WARNING: If this WARNING should be ignored, a serious danger
to life or a serial injury would be resulted.
    CAUTION: If this CAUTION should be ignored, an injury or a
damage to properties would be resulted.
Meanings of pictographs
  This pictograph means that a care must be taken. In the
pictograph, the concrete content is drawn. (High temperature
in this example)
  This pictograph means inhibition. The concrete content of
inhibition is shown in or near the pictograph. (Inhibition of dis-
assembly in this example)
This pictograph means a thing which must be done. (Dis-
connecting the power plug from the power outlet in this ex-
ample)
A.   WARNING
  1) Never use a power source of more than 15A, 100V.
Avoid complex wiring, which may lead to a fire or an electric
shock.
  2) When any abnormality occurs, such as smoke or bad smell, do not
use the machine. If used in abnormal conditions, a fire or an
electric shock may be resulted.
  3) Be sure to connect the grounding wire.  If an electric leakage oc-
curs without grounding, a fire or an electric shock may be resulted.
To protect the machine and the power unit from lightening,
grounding must be made.
  4) When removing the cabinet of the machine, use an extreme care.
There is a high voltage section inside the machine which may
cause an electric shock when touched. Do not leave the machine
with the cabinet removed. It is very dangerous for the user to
touch the inside of the machine.
 5) Do not damage, brake, or work the power cord. Do not put a
heavy thing on the power cord. Do not pull or bend the power cord
extremely. Otherwise, the power cord may be damaged to cause
a fire or an electric shock.
  6) Do not put a vessel with water in it on the machine. Do not put a
metal piece on the machine, which may drop into the machine,
causing a fire or an electric shock.
  7) If water or a metal piece drops into the machine, turn off the power
switch, disconnect the power plug, then remove the dropped thing.
  8) Do not use a wet hand to disconnect or insert the power plug and
to operate or service the machine. It may cause an electric shock.
B.   CAUTION
  1) Avoid installation on an unstable surface or a slant surface. Other-
wise, it may drop from the surface, resulting in an injury. It is ad-
visable to use the optional paper feed desk or the exclusive-use
desk.
  2) Avoid installation in a humid or dusty place. Otherwise, a fire or an
elctric shock may be resulted.
  3) The fusing section is very high. Be careful not to burn when ser-
vicing.
  4) When disconnecting the power plug from the power outlet, do not
pull the power cord. Otherwise, the cord may be damaged, result-
ing in exposed core or disconnection, causing a fire or an electric
shock.
  5) Do not throw toner or a toner cartridge in a fire. Otherwise, toner
may pop and burn you.
 6) When using the optional paper feed desk or the exclusive-use
desk, be sure to fix the adjusters on the floor, and lock the casters.
As shown in the figure, rotate the adjuster in the fixing direction
until it makes contact with the floor. Lock the casters to fix the
machine. (If the casters are not locked, the machine may gradually
move so that the SPF cable may be rubbed with the wall, causing
disconnection.
When moving the machine a little for reforming the office, turn the
adjuster to release lock of the casters. (After moving, lock the ad-
justers and casters to fix the machine.)
  7) Do not see the light source and the laser beams. Otherwise the
eyes may be damaged.
 8) When moving the machine, turn off the power switch and the
heater switch, and be sure to disconnect the power plug from the
power outlet. If not, the cord may be damaged to cause a fire or
an electric shock.
  9) It is very dangerous to perform reception or printing during servic-
ing. When servicing with the cabinet removed, pull out the
telephone line and the printer cable from the machine. (The laser
print function and the Fax function are options.)
10) There are some sharp edges inside the machine. Be careful not
to injure your fingers when servicing.
Single pass feeder
(DM-SP1)
2x250-sheet paper feed unit 
(DM-DE2)
250-sheet paper feed unit 
(DM-DE1)
Electronic sorting kit (DM-EB1)
Facsimile expansion kit (DM-FX1)*
This option is not used for the copier 
operation.
For description of this option, see its 
separate manual.
Fusing section
DM-2000
1 – 1
[2] SPECIFICATIONS
1. Copy mode
A. Type
Type
Desk-top
B. Copy speed
(1) Basic speed
1 scan multi copy
20 sheets/min
Condition: Copy speed in the normal copy.
(2) Continuous copy speed (Sheets/min)
Paper size
Normal
Enlargement
(200%)
Reduction
(50%)
Inch
system
11" 
× 17"
10
10
10
8.5" 
× 14"
12
12
12
8.5" 
× 13"
12
12
12
8.5" 
× 11"
20
20
20
8.5" 
× 11"R
15
15
15
8.5" 
× 5.5"
20
20
20
C. First copy time
(1) Basic speed
First copy time
7.2 sec (8.5" 
× 11"/1st cassette/with OC)
D. Document
Max. document size
11" 
× 17"
Document reference position
Left side center
Detection (Platen)
Available
Detection size
11" 
× 17", 8.5" × 14",
8.5" 
× 11", 8.5" × 11"R,
8.5" 
× 5.5"
(1) SPF/R-SPF
Standard/Option
Option
SPF; DM-SP1
RSPF; Not available
Document load capacity
30 sheets (56 
∼ 90 g/m
2
 15 
∼ 23.9
lbs equivalent)
Document size
(Max. 
∼ Min.)
11" 
× 17" ∼ 8.5" × 5.5"
Document replacement
speed
16 sheets/min (8.5" 
× 11" normal
copy)
Document set/Paper
feed direction
Face up, Center reference, Paper
feed from the top
Document weight
56 
∼ 90 g/m
2
, 15 
∼ 23.9 lbs
Document size detection
On the document feed tray
Document mixture
Copy mode: Not Available
E. Paper feed
Copy size
Max.: A3, 11" 
× 17"
Min.: A6, 5.5" 
× 8.5" (For B6/A6 and 5.5" × 8.5",
Multi bypass tray only.)
Paper feed
system
2 cassette + Multi bypass tray
Paper feed
capacity
250 
× 2 (Paper feed tray) + 100 (Multi bypass
tray)(56 
∼ 80 g/m
2
 equivalent)
Remaining
quantity
detection
Cassette section
Empty detection available,
size detection by key input
Multi bypass tray
Only empty detection
available
(1) Paper feed section of the copier
Paper feed
size
11" 
× 17", 8.5" × 14", 8.5" × 13", 8.5" × 11",
8.5" 
× 11"R, 8.5" × 5.5" (8.5" × 5.5" is only for
tray 1)
Side front
Front 2 step
Paper feed
capacity
250 sheets (56 
∼ 80 g/m
2
 15 
∼ 21 lbs
equivalent)
Detection
Paper empty detection available, size detection
(by key input)
Detection size: 11" 
× 17", 8.5" × 14",
8.5" 
× 11", 8.5" × 11"R, 8.5" × 5.5"
Weight
56 
∼ 80 g/m
2
 15 
∼ 21 lbs
Special paper
Recycled paper
(2) Manual paper feed section
Paper feed size
11" 
× 17" ∼ 5.5" × 8.5"
Paper feed capacity
100 sheets
Detection
Size detection not available, paper empty
detection available
Weight
56 
∼ 128 g/m
2
 15 
∼ 34 lbs
Special paper
Recycled paper, OHP film, labels
Paper feed
Single except for recycled paper
(3) Option paper feed unit
1-step paper feed unit
2-step paper feed unit
Model
DM-DE1
DM-DE2
Paper feed
size
11" 
× 17", 8.5" × 14", 8.5" × 11", 
8.5" 
× 11"R
Capacity
(56 
∼ 80
g/m
2
)
About 250 sheets
× 1 step
About 250 sheets
× 2 steps
Paper
weight
56 
∼ 80 g/m
2
 15 
∼ 21 lbs
Dehumidifier 
heater
None
Detection
Paper empty detection, size detection
(by key input)
Paper size
setting
User setting (by key input)
External
dimensions
(W 
× D × H)
590 
× 571 × 88 mm
590 
× 571 × 173.5 mm
Weight
About 5 kg
About 10 kg
Special
paper
Recycled paper
DM-2000
2 – 1

Download Sharp DM-2000 (serv.man3) Service Manual (Repair Manual)

Here you can view online or download Sharp DM-2000 (serv.man3) Service Manual in pdf. This Service Manual can help you recover, restore, fix, disassemble and repair Sharp DM-2000 (serv.man3) Copying Equipment. Information contained in Sharp DM-2000 (serv.man3) service manual (repair manual) typically includes:

  • Disassembly, troubleshooting, programming, maintenance, remote, adjustment, installation and setup instructions.
  • Schematics, wiring and block diagrams.
  • Printed wiring boards (PWB) and printed circuit boards (PCB).
  • Parts list (bill of materials).