DOWNLOAD Sharp DM-2000 (serv.man147) Service Manual ↓ Size: 325.04 KB | Pages: 3 in PDF or view online for FREE

Model
DM-2000 (serv.man147)
Pages
3 Few pages! See other manuals at the bottom of the first or last page.
Size
325.04 KB
Type
PDF
Document
Service Manual / Technical Bulletin
Brand
Device
Copying Equipment / Flash Upgrade Procedure (Sent out as FF COP 085)(Originally written for AR161 200 only).
File
dm-2000-sm147.pdf
Date

Sharp DM-2000 (serv.man147) Service Manual / Technical Bulletin ▷ View online

“FAST FACTS”
FOR THE ATTENTION OF THE SERVICE DEPARTMENT
Models :AR-161/AR-200
Ref : FF/COP/85
Date : 12/04/99
   
Subject :Flash Upgrade Proceedure
Action :-If  an AR-EB3 Electronic Sort  Board is to be fitted to the above models
then the machine firmware will require upgrade to version 4.01, which is the
latest version.
The AR-PB8 Printer Board will work with earlier versions of firmware, however
we recommend that all machines have latest  version.
Full details of flash proceedure can be found on the intranet under model AR-
161, AR-200 inn the FAQ’s section.
Note:
When refitting the metal cover ensure the serial din socket pwb is held in place
by the locating protrusion of the cover.
NOTE :-
Please advise our Technical Administration Department of any changes to your Service Department
details (i.e. fax number, telephone number, address, etc.) on fax number 0161 205 0014.
Sharp Electronics (UK) Ltd
Copier Technical Support
Technical Services Group
AR-161 SERIES, AR-200 SERIES. 
FLASH ROM VERSION UP PROCEDURE (Ver. 2.00)
1. 
A. Tool
4) Connect the serial connector.
. Machine
PC
Operates on Windows 
Level convertor (UKOG-0002QSZZ) (with serial cable)
Level convertor (UKOG-OOOSQSZZ) (without serial cable)
. (Serial cable)
B. Procedures
1) Connect the PC and the level convertor, and start Windows.
2) Turn off the power of the machine.
3) Remove the cap at the rear of the machine.
5) Turn on the power of the machine.
6) Execute SIM 
 (Main Flash ROM Ver. 4.00 or later)
The machine enters the download mode. (The machine ac-
cepts no key operations.)
Note: 
 69-01 can be executed only with machine Ver. 4.00
or later. If SIM 69-01 is not executed with former vesions,
no display is made on the panel. In such a case, perform
the following procedure instead of SIM 
7) Execute “mainte-Vxxx.exe” on the PC.
 
   
* Use 
 ver. 1.04 or later.
8) Communication 
 speed setting
Select “SETUP” in the communication menu, and select the
most suitable item with consideration of PC environment, work
time, etc.
9) Select “Program Data Download” in the SPECIAL folder, and
transfer data.
10)
Select the data for MCU to be transferred.
12) After transfer of data, turn off the machine and disconnect the
 (When the power is turned off, SIM 69-01
celled.)
is 
Reference:
If the power is turned off during the procedure or in case
of a communication error, resume the procedure from 2).
Display

Sharp DM-2000 (serv.man147) Service Manual / Technical Bulletin ▷ Download

  • DOWNLOAD Sharp DM-2000 (serv.man147) Service Manual ↓ Size: 325.04 KB | Pages: 3 in PDF or view online for FREE
  • Here you can View online or download the Service Manual / Technical Bulletin for the Sharp DM-2000 (serv.man147) in PDF for free, which will help you to disassemble, recover, fix and repair Sharp DM-2000 (serv.man147) Copying Equipment. Information contained in Sharp DM-2000 (serv.man147) Service Manual / Technical Bulletin (repair manual) includes:
  • Disassembly, troubleshooting, maintenance, adjustment, installation and setup instructions.
  • Schematics, Circuit, Wiring and Block diagrams.
  • Printed wiring boards (PWB) and printed circuit boards (PCB).
  • Exploded View and Parts List.