DM-2000 (serv.man13). DM2000-Operation Manual Part4 — Sharp Copying Equipment User Guide / Operation Manual

Model
DM-2000 (serv.man13)
Pages
28
Size
487.6 KB
Type
PDF
Document
User Guide / Operation Manual
Brand
Device
Copying Equipment / DM2000-Operation Manual Part4
File
dm-2000-sm13.pdf
Date

View Sharp DM-2000 (serv.man13) User Guide / Operation Manual online

55
OPTIONAL EQUIPMENT
OPTIONAL
EQUIPMENT
CONTENTS
Page
SYSTEM CONFIGURATION . . . . . . . . . . . . . . . . . . . . . . . . . . .  56
SINGLE PASS FEEDER (AR-SP2) . . . . . . . . . . . . . . . . . . . . . .   57
Part names
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  57
Specifications
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  57
Using the SPF
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  58
Misfeed removal
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  59
ELECTRONIC SORTING KIT (AR-EB3) . . . . . . . . . . . . . . . . . .  60
Rotation copying
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  60
Sort/group
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  61
2 in 1 or 4 in 1
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  63
Erase
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  65
Margin shift
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  67
250-SHEET PAPER FEED UNIT (AR-DE5)/
2x250-SHEET PAPER FEED UNIT (AR-DE6) 
. . . . . . . . . . . . . .  68
56
OPTIONAL EQUIPMENT
SYSTEM CONFIGURATION
A number of options are available for the copier which allow you to configure
a copier system to meet your particular needs. The options include the
following.
System configuration
Single pass feeder
(AR-SP2)
2x250-sheet paper feed unit 
(AR-DE6)
250-sheet paper feed unit 
(AR-DE5)
Platen cover (AR-VR1) 
Electronic sorting kit (AR-EB3)
Facsimile expansion kit (AR-FX2)
*
Printer expansion kit (AR-PB8)
*
PS2 expansion kit (AR-PS1)
*
LCD panel kit (AR-PA1)
*
Job separator tray kit (AR-TR2)
*
* These options are not used for the copier
operation. For description of these options, see
their separate manuals.
57
OPTIONAL EQUIPMENT
SINGLE PASS FEEDER (AR-SP2)
The single pass feeder (SPF) holds up to 30 originals for automatic feeding.
Single pass feeder (AR-SP2)
PART NAMES
Specifications
Acceptable
Weight:
56 to 90 g/m
2
originals
Size:
A5 to A3
Capacity:
Up to 30 sheets provided the total aggregate
thickness does not exceed 4 mm
Detectable original
A5, A4, A4R, B4, A3
sizes
Power supply
Drawn from the copier
Weight
Approx. 5.3 kg
Dimensions
583 mm (W) x 435 mm (D) x 131 mm (H)
Document feeder tray
Left feeding roller cover
Original guides
Exit area
Right feeding roller cover
As a part of our policy of continuous improvement, SHARP reserves
the right to make design and specification changes for product
improvement without prior notice. The performance specification
figures indicated are nominal values of production units. There may
be some deviations from these values in individual units.
58
OPTIONAL EQUIPMENT
SINGLE PASS FEEDER (AR-SP2)
Using the SPF
Be sure to remove any staples or paper clips from the
originals.
Damaged or crumpled originals may misfeed in the SPF.
It is recommended that these originals be copied from the
original table.
For best feeding of originals which have binding holes
punched into them, insert them so that the holes are
positioned to the right or along the side guides.
Special originals such as transparency film and tracing
paper should not be fed through the SPF but should be
copied from the original table.
Image loss (max. 4 mm) can occur at the leading and
trailing edges of the copies. Also image loss (max. 4 mm
in total) can occur along the other edges of the copies.
Single pass feeder (AR-SP2)
Stream feeding mode
If the stream feeding mode has been enabled using user program
No. 4, the SPF indicator will continue to blink for approximately 5
seconds after feeding of all originals is completed. While this
indicator is blinking, any new originals placed in the SPF will be
fed and copied automatically. See page 37, USER PROGRAMS.
1
Ensure that no original is left on the original table.
2
Adjust the original guides to the size of the originals.
3
Set the originals face up in the document feeder tray.
The SPF indicator will light up. If this indicator does not light up, the
originals are not properly set or the SPF is not properly closed.
The ORIGINAL SIZE indicator for the detected original size will light
up, and the paper tray with the corresponding paper size will be
automatically selected.
The auto paper select function can be disabled using user program No.
8. If this function has been disabled, use the TRAY SELECT key to
select the desired paper tray. See page 37, USER PROGRAMS.
To copy onto a different size paper, use the TRAY SELECT key to
make the selection.
The bypass tray cannot be automatically selected.
4
Set the number of copies and press the START key.
Press the CLEAR key to stop copying in the middle of a run.
If the offset stack mode is enabled using user program No. 19, copies
will be output in the group mode. Groups of copies of each original will
be offset from the previous group.
Page of 28
Display

Download Sharp DM-2000 (serv.man13) User Guide / Operation Manual

Here you can view online or download Sharp DM-2000 (serv.man13) User Guide / Operation Manual in pdf. This User Guide / Operation Manual can help you recover, restore, fix, disassemble and repair Sharp DM-2000 (serv.man13) Copying Equipment. Information contained in Sharp DM-2000 (serv.man13) service manual (repair manual) typically includes:

  • Disassembly, troubleshooting, programming, maintenance, remote, adjustment, installation and setup instructions.
  • Schematics, wiring and block diagrams.
  • Printed wiring boards (PWB) and printed circuit boards (PCB).
  • Parts list (bill of materials).