DM-2000 (serv.man146). Version 4.10 Firmware (Sent out as FF COP 0890 — Sharp Copying Equipment Technical Bulletin (repair manual)

Model
DM-2000 (serv.man146)
Pages
1 Few pages! See other manuals at the bottom of the first or last page.
Size
10.36 KB
Type
PDF
Document
Technical Bulletin
Brand
Device
Copying Equipment / Version 4.10 Firmware (Sent out as FF COP 0890
File
dm-2000-sm146.pdf
Date

View Sharp DM-2000 (serv.man146) Technical Bulletin online

“FAST FACTS”
FOR THE ATTENTION OF THE SERVICE DEPARTMENT
Models :AR161/AR200     Ref : FF/COP/89
Date :18
TH
 June 99
   
Subject :Software Upgrade Version 4.10
Details:
1)
 
The display will now indicate  ‘CH’  when the side cover of the AR-DE6 (2 Tray unit) is
opened.
2)
 
When a copy job is run on a machine with an AR-EB3 ( Electronic Sort Board ) in group
mode/ sort mode and a single copy job exceeds the upper limit number of copies that the
exit tray can hold ( see table), the copy job will stop when the upper limit of copies is
reached, then the TRAY FULL LED will light and the copy start button will flash.
Job Separator ( AR-TR2 )
Upper limit number of copies
the exit tray can hold
Machine without separator
Job is stopped at 250 copies
Machine with
AR-EB3
Machine with separator
Job is stopped at 150 copies
The above feature will be on when SIM 26-51 is set to “1”. If set to “O” and the exit is
full the machine will show a paper jam as with previous version of firmware.
The firmware can be found on the Sharp Intranet under AR161, AR200 and  latest technica
information.
NOTE :-
Please advise our Technical Administration Department of any changes to your Service Department
details (i.e. fax number, telephone number, address, etc.) on fax number 0161 205 0014.
Sharp Electronics (UK) Ltd
Copier Technical Support
Technical Services Group
“FAST FACTS”
FOR THE ATTENTION OF THE SERVICE DEPARTMENT
Models :AR161/AR200     Ref : FF/COP/89
Date :18
TH
 June 99
   
Subject :Software Upgrade Version 4.10
Details:
1)
 
The display will now indicate  ‘CH’  when the side cover of the AR-DE6 (2 Tray unit) is
opened.
2)
 
When a copy job is run on a machine with an AR-EB3 ( Electronic Sort Board ) in group
mode/ sort mode and a single copy job exceeds the upper limit number of copies that the
exit tray can hold ( see table), the copy job will stop when the upper limit of copies is
reached, then the TRAY FULL LED will light and the copy start button will flash.
Job Separator ( AR-TR2 )
Upper limit number of copies
the exit tray can hold
Machine without separator
Job is stopped at 250 copies
Machine with
AR-EB3
Machine with separator
Job is stopped at 150 copies
The above feature will be on when SIM 26-51 is set to “1”. If set to “O” and the exit is
full the machine will show a paper jam as with previous version of firmware.
The firmware can be found on the Sharp Intranet under AR161, AR200 and  latest technica
information.
NOTE :-
Please advise our Technical Administration Department of any changes to your Service Department
details (i.e. fax number, telephone number, address, etc.) on fax number 0161 205 0014.
Sharp Electronics (UK) Ltd
Copier Technical Support
Technical Services Group
“FAST FACTS”
FOR THE ATTENTION OF THE SERVICE DEPARTMENT
Models :AR161/AR200     Ref : FF/COP/89
Date :18
TH
 June 99
   
Subject :Software Upgrade Version 4.10
Details:
1)
 
The display will now indicate  ‘CH’  when the side cover of the AR-DE6 (2 Tray unit) is
opened.
2)
 
When a copy job is run on a machine with an AR-EB3 ( Electronic Sort Board ) in group
mode/ sort mode and a single copy job exceeds the upper limit number of copies that the
exit tray can hold ( see table), the copy job will stop when the upper limit of copies is
reached, then the TRAY FULL LED will light and the copy start button will flash.
Job Separator ( AR-TR2 )
Upper limit number of copies
the exit tray can hold
Machine without separator
Job is stopped at 250 copies
Machine with
AR-EB3
Machine with separator
Job is stopped at 150 copies
The above feature will be on when SIM 26-51 is set to “1”. If set to “O” and the exit is
full the machine will show a paper jam as with previous version of firmware.
The firmware can be found on the Sharp Intranet under AR161, AR200 and  latest technica
information.
NOTE :-
Please advise our Technical Administration Department of any changes to your Service Department
details (i.e. fax number, telephone number, address, etc.) on fax number 0161 205 0014.
Sharp Electronics (UK) Ltd
Copier Technical Support
Technical Services Group
“FAST FACTS”
FOR THE ATTENTION OF THE SERVICE DEPARTMENT
Models :AR161/AR200     Ref : FF/COP/89
Date :18
TH
 June 99
   
Subject :Software Upgrade Version 4.10
Details:
1)
 
The display will now indicate  ‘CH’  when the side cover of the AR-DE6 (2 Tray unit) is
opened.
2)
 
When a copy job is run on a machine with an AR-EB3 ( Electronic Sort Board ) in group
mode/ sort mode and a single copy job exceeds the upper limit number of copies that the
exit tray can hold ( see table), the copy job will stop when the upper limit of copies is
reached, then the TRAY FULL LED will light and the copy start button will flash.
Job Separator ( AR-TR2 )
Upper limit number of copies
the exit tray can hold
Machine without separator
Job is stopped at 250 copies
Machine with
AR-EB3
Machine with separator
Job is stopped at 150 copies
The above feature will be on when SIM 26-51 is set to “1”. If set to “O” and the exit is
full the machine will show a paper jam as with previous version of firmware.
The firmware can be found on the Sharp Intranet under AR161, AR200 and  latest technica
information.
NOTE :-
Please advise our Technical Administration Department of any changes to your Service Department
details (i.e. fax number, telephone number, address, etc.) on fax number 0161 205 0014.
Sharp Electronics (UK) Ltd
Copier Technical Support
Technical Services Group
“FAST FACTS”
FOR THE ATTENTION OF THE SERVICE DEPARTMENT
Models :AR161/AR200     Ref : FF/COP/89
Date :18
TH
 June 99
   
Subject :Software Upgrade Version 4.10
Details:
1)
 
The display will now indicate  ‘CH’  when the side cover of the AR-DE6 (2 Tray unit) is
opened.
2)
 
When a copy job is run on a machine with an AR-EB3 ( Electronic Sort Board ) in group
mode/ sort mode and a single copy job exceeds the upper limit number of copies that the
exit tray can hold ( see table), the copy job will stop when the upper limit of copies is
reached, then the TRAY FULL LED will light and the copy start button will flash.
Job Separator ( AR-TR2 )
Upper limit number of copies
the exit tray can hold
Machine without separator
Job is stopped at 250 copies
Machine with
AR-EB3
Machine with separator
Job is stopped at 150 copies
The above feature will be on when SIM 26-51 is set to “1”. If set to “O” and the exit is
full the machine will show a paper jam as with previous version of firmware.
The firmware can be found on the Sharp Intranet under AR161, AR200 and  latest technica
information.
NOTE :-
Please advise our Technical Administration Department of any changes to your Service Department
details (i.e. fax number, telephone number, address, etc.) on fax number 0161 205 0014.
Sharp Electronics (UK) Ltd
Copier Technical Support
Technical Services Group

Download Sharp DM-2000 (serv.man146) Technical Bulletin

Here you can view online or download Sharp DM-2000 (serv.man146) Technical Bulletin in pdf. This Technical Bulletin can help you recover, restore, fix, disassemble and repair Sharp DM-2000 (serv.man146) Copying Equipment. Information contained in Sharp DM-2000 (serv.man146) service manual (repair manual) typically includes:

  • Disassembly, troubleshooting, programming, maintenance, remote, adjustment, installation and setup instructions.
  • Schematics, wiring and block diagrams.
  • Printed wiring boards (PWB) and printed circuit boards (PCB).
  • Parts list (bill of materials).