DM-2000 (serv.man121). 1.Shape Change Of Rear Exterior. 2.Shape Change Of MCU Fixing Plate. 3.Shape Change Of Sensor Fixing Plate And Optical Base Plate. (WHITE) — Sharp Copying Equipment Technical Bulletin (repair manual)

Model
DM-2000 (serv.man121)
Pages
2 Few pages! See other manuals at the bottom of the first or last page.
Size
71.74 KB
Type
PDF
Document
Technical Bulletin
Brand
Device
Copying Equipment / 1.Shape Change Of Rear Exterior. 2.Shape Change Of MCU Fixing Plate. 3.Shape Change Of Sensor Fixing Plate And Optical Base Plate. (WHITE)
File
dm-2000-sm121.pdf
Date

View Sharp DM-2000 (serv.man121) Technical Bulletin online

DCE092
Sharp Electronics (UK) Ltd., Technical Services Group
Date:
28 January 2000
Model: DM2000
Ref.:
027
Colour: White
Page:
1 of 2
TECHNICAL BULLETIN
1. SHAPE CHANGE OF REAR EXTERIOR.
2. SHAPE CHANGE OF MCU FIXING PLATE.
3. SHAPE CHANGE OF SENSOR FIXING PLATE AND OPTICAL 
BASE PLATE.
 1. Shape change of rear exterior.   
1. Model Name:
AR161/200 Series, DM2000
2. General:
To improve the productivity, the shape of rear exterior has been changed.
3. Description:
Parts name
Current parts
New parts
GCAB-0013QSZZ
Rear exterior
GCAB-0013QSZA
GCAB-0013QSZ1
4. Action:
From the production in May 1999.
 2. Shape change of MCU fixing plate.   
1. Model Name:
AR161/200 Series, DM2000
2. General:
The shape of MCU fixing plate has been changed as the connector for download may fall
into it.
3. Description:
Parts name
Current parts
New parts
MCU fixing plate
LPLTM0063QSZZ
LPLTM0063QSZ1
4. Action:
From the middle of production in June 1999 (Production in Japan) *
From the production in May 1999 (Production in China) *
DCE092
Sharp Electronics (UK) Ltd., Technical Services Group
 3.Shape change of sensor fixing plate and optical base plate   
1. Model Name:
AR200
2. General:
When using the SPF, the No.2 and No.3 mirrors in the optical unit are located above the
size sensor. Therefore, the shape of sensor fixing plate and the position of sensor has
been changed. Moreover, the optical base plate has been changed due to this change.
3. Description
Parts name
Current parts
New parts
Sensor fixing plate (AB series)
LPLTM0085QSZZ
LPLTM0085QSZ1
Sensor fixing plate (Inch series)
LPLTM0119QSZZ
LPLTM0119QSZ1
Optical base plate
CDAIU0012QS02
CDAIU0012QS03
4. Action:
From production in May 1999.
Current parts
New parts
No
Model
name
Version
P/G
No.
Parts code
Parts code
Pric
e
Parts name
Effec-
tive
time
Inter-
change-
ability
Note
GCAB-0013QSZZ
1
 1  -18
GCAB-0013QSZA
GCAB-0013QSZ1
BA
Rear exterior
'99/5
1
2
AR161
AR200
DM2000
12 -38
10 -38
LPLTM0063QSZZ
LPLTM0063QSZ1
AS
MCU fixing plate
*
LPLTM0085QSZZ
LPLTM0085QSZ1
AK
Sensor fixing
plate (AB series)
 4  -54
LPLTM0119QSZZ
LPLTM0119QSZ1
AH
Sensor fixing
plate (Inch series)
3
AR200
All
 4  -48
CDAIU0012QS02
CDAIU0012QS03
BE
Optical base plate
'99/5
3
<Interchange>
1. Interchangeable.
4. Not Interchangeable.
2. Current type can be used in place of new type.
New type cannot be used in place of current type.
5. Interchangeable if replaced with same types of related
parts in use.
3. Current type cannot be used in place of new type.
New type can be used in place of current type.
6. Others.
Parts marked with "
" is important for maintaining the safety of the set. Be sure to replace these parts with specified ones for
maintaining the safety and performance of the set.
DCE092
Sharp Electronics (UK) Ltd., Technical Services Group
 3.Shape change of sensor fixing plate and optical base plate   
1. Model Name:
AR200
2. General:
When using the SPF, the No.2 and No.3 mirrors in the optical unit are located above the
size sensor. Therefore, the shape of sensor fixing plate and the position of sensor has
been changed. Moreover, the optical base plate has been changed due to this change.
3. Description
Parts name
Current parts
New parts
Sensor fixing plate (AB series)
LPLTM0085QSZZ
LPLTM0085QSZ1
Sensor fixing plate (Inch series)
LPLTM0119QSZZ
LPLTM0119QSZ1
Optical base plate
CDAIU0012QS02
CDAIU0012QS03
4. Action:
From production in May 1999.
Current parts
New parts
No
Model
name
Version
P/G
No.
Parts code
Parts code
Pric
e
Parts name
Effec-
tive
time
Inter-
change-
ability
Note
GCAB-0013QSZZ
1
 1  -18
GCAB-0013QSZA
GCAB-0013QSZ1
BA
Rear exterior
'99/5
1
2
AR161
AR200
DM2000
12 -38
10 -38
LPLTM0063QSZZ
LPLTM0063QSZ1
AS
MCU fixing plate
*
LPLTM0085QSZZ
LPLTM0085QSZ1
AK
Sensor fixing
plate (AB series)
 4  -54
LPLTM0119QSZZ
LPLTM0119QSZ1
AH
Sensor fixing
plate (Inch series)
3
AR200
All
 4  -48
CDAIU0012QS02
CDAIU0012QS03
BE
Optical base plate
'99/5
3
<Interchange>
1. Interchangeable.
4. Not Interchangeable.
2. Current type can be used in place of new type.
New type cannot be used in place of current type.
5. Interchangeable if replaced with same types of related
parts in use.
3. Current type cannot be used in place of new type.
New type can be used in place of current type.
6. Others.
Parts marked with "
" is important for maintaining the safety of the set. Be sure to replace these parts with specified ones for
maintaining the safety and performance of the set.
DCE092
Sharp Electronics (UK) Ltd., Technical Services Group
 3.Shape change of sensor fixing plate and optical base plate   
1. Model Name:
AR200
2. General:
When using the SPF, the No.2 and No.3 mirrors in the optical unit are located above the
size sensor. Therefore, the shape of sensor fixing plate and the position of sensor has
been changed. Moreover, the optical base plate has been changed due to this change.
3. Description
Parts name
Current parts
New parts
Sensor fixing plate (AB series)
LPLTM0085QSZZ
LPLTM0085QSZ1
Sensor fixing plate (Inch series)
LPLTM0119QSZZ
LPLTM0119QSZ1
Optical base plate
CDAIU0012QS02
CDAIU0012QS03
4. Action:
From production in May 1999.
Current parts
New parts
No
Model
name
Version
P/G
No.
Parts code
Parts code
Pric
e
Parts name
Effec-
tive
time
Inter-
change-
ability
Note
GCAB-0013QSZZ
1
 1  -18
GCAB-0013QSZA
GCAB-0013QSZ1
BA
Rear exterior
'99/5
1
2
AR161
AR200
DM2000
12 -38
10 -38
LPLTM0063QSZZ
LPLTM0063QSZ1
AS
MCU fixing plate
*
LPLTM0085QSZZ
LPLTM0085QSZ1
AK
Sensor fixing
plate (AB series)
 4  -54
LPLTM0119QSZZ
LPLTM0119QSZ1
AH
Sensor fixing
plate (Inch series)
3
AR200
All
 4  -48
CDAIU0012QS02
CDAIU0012QS03
BE
Optical base plate
'99/5
3
<Interchange>
1. Interchangeable.
4. Not Interchangeable.
2. Current type can be used in place of new type.
New type cannot be used in place of current type.
5. Interchangeable if replaced with same types of related
parts in use.
3. Current type cannot be used in place of new type.
New type can be used in place of current type.
6. Others.
Parts marked with "
" is important for maintaining the safety of the set. Be sure to replace these parts with specified ones for
maintaining the safety and performance of the set.
DCE092
Sharp Electronics (UK) Ltd., Technical Services Group
 3.Shape change of sensor fixing plate and optical base plate   
1. Model Name:
AR200
2. General:
When using the SPF, the No.2 and No.3 mirrors in the optical unit are located above the
size sensor. Therefore, the shape of sensor fixing plate and the position of sensor has
been changed. Moreover, the optical base plate has been changed due to this change.
3. Description
Parts name
Current parts
New parts
Sensor fixing plate (AB series)
LPLTM0085QSZZ
LPLTM0085QSZ1
Sensor fixing plate (Inch series)
LPLTM0119QSZZ
LPLTM0119QSZ1
Optical base plate
CDAIU0012QS02
CDAIU0012QS03
4. Action:
From production in May 1999.
Current parts
New parts
No
Model
name
Version
P/G
No.
Parts code
Parts code
Pric
e
Parts name
Effec-
tive
time
Inter-
change-
ability
Note
GCAB-0013QSZZ
1
 1  -18
GCAB-0013QSZA
GCAB-0013QSZ1
BA
Rear exterior
'99/5
1
2
AR161
AR200
DM2000
12 -38
10 -38
LPLTM0063QSZZ
LPLTM0063QSZ1
AS
MCU fixing plate
*
LPLTM0085QSZZ
LPLTM0085QSZ1
AK
Sensor fixing
plate (AB series)
 4  -54
LPLTM0119QSZZ
LPLTM0119QSZ1
AH
Sensor fixing
plate (Inch series)
3
AR200
All
 4  -48
CDAIU0012QS02
CDAIU0012QS03
BE
Optical base plate
'99/5
3
<Interchange>
1. Interchangeable.
4. Not Interchangeable.
2. Current type can be used in place of new type.
New type cannot be used in place of current type.
5. Interchangeable if replaced with same types of related
parts in use.
3. Current type cannot be used in place of new type.
New type can be used in place of current type.
6. Others.
Parts marked with "
" is important for maintaining the safety of the set. Be sure to replace these parts with specified ones for
maintaining the safety and performance of the set.

Download Sharp DM-2000 (serv.man121) Technical Bulletin

Here you can view online or download Sharp DM-2000 (serv.man121) Technical Bulletin in pdf. This Technical Bulletin can help you recover, restore, fix, disassemble and repair Sharp DM-2000 (serv.man121) Copying Equipment. Information contained in Sharp DM-2000 (serv.man121) service manual (repair manual) typically includes:

  • Disassembly, troubleshooting, programming, maintenance, remote, adjustment, installation and setup instructions.
  • Schematics, wiring and block diagrams.
  • Printed wiring boards (PWB) and printed circuit boards (PCB).
  • Parts list (bill of materials).