DM-2000 (serv.man67). Countermeasure against soiling of upper heat roller. — Sharp Copying Equipment Technical Bulletin (repair manual)

Model
DM-2000 (serv.man67)
Pages
2 Few pages! See other manuals at the bottom of the first or last page.
Size
111.82 KB
Type
PDF
Document
Technical Bulletin
Brand
Device
Copying Equipment / Countermeasure against soiling of upper heat roller.
File
dm-2000-sm67.pdf
Date

View Sharp DM-2000 (serv.man67) Technical Bulletin online

DCE213
Sharp Electronics (UK) Ltd., Technical Services Group
Date:
27 March 2001
Model: DM2000
Ref.:
081
Colour: White
Page:
1 of 2
1. Model Name:
AR161/163/200/206/F200/F201, DM2000
2. Description:
When using paper which generates a lot of paper dust, the mixture of paper dust and
toner sticks to the surface of the upper heat roller in the fusing section little by little as the
number of copies increases.  This may cause paper jam.  As a countermeasure against
this trouble, a cleaning felt AS is added to the fusing unit to remove extraneous matter
from the surface of the upper heat roller.
3. Action:
From production in January 2001 (models: AR163/206/F201)
From the middle of production in February 2001 (except the above)
COUNTERMEASURE AGAINST
SOILING OF UPPER HEAT ROLLER
TECHNICAL BULLETIN
DCE213
Sharp Electronics (UK) Ltd., Technical Services Group
Cleaning felt mounting procedure (market action)
1.  Remove the fusing rear paper guide from the fusing unit.
2.  Clean the cleaning felt attaching the surface on the fusing rear paper guide with alcohol.
3.  Insert the projections (4 places / 8 pcs) on the back of the cleaning felt AS into the holes (arrow sections) on the
fusing rear paper guide to attach it.
* The cleaning felt attaching position is restricted by the projections.
* After attaching the cleaning felt AS, press the sheet metal section to attach the double-sided adhesive tape
securely.
Bend the flat projection of the cleaning felt AS, which overhang the surface of the fusing paper guide.  Moreover,
check that the curved projections are hooked securely.
Note: 1. Clean the dirty heat roller before mounting the fusing rear paper guide (with cleaning felt AS).
2. When mounting the fusing rear paper guide in the fusing unit, be careful no to damage the upper heat
roller by the release claw.
Current Parts
New Parts
Model name
Version
P/G
No.
Parts code
Parts code
Price rank
Parts name
Effective
time
Interchange-
ability
Note
Refer to
main section
All
[7] -
[9] -
-
CPLTM0255QS01
AS
Cleaning felt
AS
Mid- Feb
01
6
<Interchange>
1. Interchangeable.
4. Not interchangeable.
2. Current type can be used in place of new type.
   New type cannot be used in place of current type.
5. Interchangeable if replaced with same types of related parts in used.
3. Current type cannot be used in place of new type.
   New type can be used in place of current type.
6. Others.
Parts marked with “         ” is important for maintaining the safety of the set.  Be sure to replace these parts with specified ones for maintaining the safety and
performance of the set.
Page of 2
Display

Download Sharp DM-2000 (serv.man67) Technical Bulletin

Here you can view online or download Sharp DM-2000 (serv.man67) Technical Bulletin in pdf. This Technical Bulletin can help you recover, restore, fix, disassemble and repair Sharp DM-2000 (serv.man67) Copying Equipment. Information contained in Sharp DM-2000 (serv.man67) service manual (repair manual) typically includes:

  • Disassembly, troubleshooting, programming, maintenance, remote, adjustment, installation and setup instructions.
  • Schematics, wiring and block diagrams.
  • Printed wiring boards (PWB) and printed circuit boards (PCB).
  • Parts list (bill of materials).