DOWNLOAD Sharp AR-M620 (serv.man68) Service Manual ↓ Size: 5.25 MB | Pages: 127 in PDF or view online for FREE

You will return to the
main screen of copy
mode.

Place the front side of
the original face down
and close the
document cover.

Follow steps 4 through 6 of "Copying from
the document glass" (page 4-12).

The front side of the
card is scanned.

The back side of the
card is scanned.

SIZE RESET

CANCEL

OK

OK

FIT TO

PAGE

The original must be placed on the document glass.
The document feeder (automatic document feeding
function) cannot be used.

To cancel the card shot function, touch the
[CANCEL] key in the card shot setting screen (the
screen of step 4).

This function is used to print a mirror image of the original. The images will be inverted in the right to left direction on
the copies.

The [MIRROR IMAGE]
key will be highlighted to
indicate that the function
is turned on, and the
mirror image icon (

)

will appear in the upper
left of the screen.

You will return to the main screen of copy mode.

Black and white are reversed in the copy to create a negative image.

The [B/W REVERSE]
key will be highlighted to
indicate that the function
is turned on, and the
mirror image icon (

)

will appear in the upper
left of the screen.

You will return to the main screen of copy mode.

Original

Copy

To display the special modes screen...
See "General procedure for using special
functions" on page 5-2.

ECIAL MODES

MIRROR

IMAGE

B/W

REVERSE

About the steps that follow
If an automatic document feeder is being used,
see pages 4-7 through 4-10. If the document
glass is being used, see pages 4-11 through 4-
13.

To cancel the mirror image function, touch the
[MIRROR IMAGE] key in the special modes screen
(the screen of step 1).

NOTES
● When this function is selected, the exposure mode setting (page 4-14) automatically changes to "Text".
● Originals with large black areas (which use a large amount of toner) can be printed with black/white reverse

to reduce toner consumption.

Original

B/W reverse copy 

To display the special modes screen...
See "General procedure for using special
functions" on page 5-2.

ECIAL MODES

MIRROR

IMAGE

B/W

REVERSE

About the steps that follow
If an automatic document feeder is being used,
see pages 4-7 through 4-10. If the document
glass is being used, see pages 4-11 through 4-
13.

To cancel the B/W reverse function, touch the [B/W
REVERSE] key in the special modes screen (the
screen of step 1).

●To exit the job programs mode, press the [CA] (clear all) key on the operation panel or touch the [EXIT] key on the

touch panel.

■

■

■

■ If a number key is selected in step 3 that has

A setting confirmation screen will appear. To replace
the existing program with the new program, touch
the [STORE] key and continue from step 4. If you do
not wish to replace the existing program, touch the
[CANCEL] key to return to the screen of step 3 and
select a different number key.

M NUMBER.

RECALL

STORE/DELETE

PROGRAMS

ESS PROGRAM NUMBER.

RECALL

STORE/

B5

B4
B5

A4

1.

3.
4.

2.

SPECIAL MODES

TO STORE, MAKE SELECTIONS AND PRESS

[OK], TO DELETE, PRESS [CANCEL].

2-SIDED COPY

OUTPUT

If overwriting of programmed copy settings has been
prohibited in the key operator programs, you will not
be able to store a job program. (See page 15 of the
key operator's guide.)

AUTO

AUTO

ORIGINAL

OK

NCEL

The screen
automatically closes and
the job program is called
up. A number key that
does not have a job
program cannot be
selected.

Copying will begin using
the settings of the job
program.

If a number key for which
no job program has
been stored is selected,
the screen will change to
the screen of step 4 on
the previous page (for
storing a job program). 

The selected program is
deleted and you return
to the screen of step 3.
To return to the screen
of step 3 without deleting
the job program, touch
the [CANCEL] key. In

both cases, touch the [EXIT] key on the screen
displayed in the screen of step 3 to exit the job
program mode.

JOB PROGRAMS

PRESS PROGRAM NUMBER.

RECALL

M NUMBER.

RECALL

STORE/DELETE

EXIT

STORE/DELETE

If overwriting of programmed copy settings has been
prohibited in the key operator programs, you will not
be able to clear a job program. (See page 15 of the
key operator's guide.)

REC LL

STORE/DELETE

A JOB PROGRAM HAS BEEN ALREADY STORED

IN THIS LOCATION.

CANCEL

DELETE

STORE