Sharp AR-M620 (serv.man68) User Manual / Operation Manual ▷ View online
REDUCTION/ENLARGEMENT/ZOOM
4-17
4
6
Make sure that an appropriate paper size
has been selected based on the selected
ratio.
has been selected based on the selected
ratio.
Auto paper select display
7
Use the numeric keys to set the desired
number of copies.
number of copies.
Up to 999 can be set.
If you are only making a
single copy, the copy
can be made with the
copy number display
showing "0".
If you are only making a
single copy, the copy
can be made with the
copy number display
showing "0".
Use the [C] (clear) key to
cancel an entry if a mistake has been made.
8
If needed, touch the [FILE] key or the
[QUICK FILE] key.
[QUICK FILE] key.
Either key can be
touched to store the
scanned document
image on the machine's
hard disk. The stored
image can be re-used
later.
touched to store the
scanned document
image on the machine's
hard disk. The stored
image can be re-used
later.
For more information on this function, see
"Document filing function" in chapter 7.
If the [FILE] key is greyed out, only the [QUICK
FILE] key can be selected.
When you touch the [QUICK FILE] key, a
message asking you to confirm the save will
appear. Touch the [OK] key in the message
screen and go to the next step.
If you wish to cancel the save, touch the [QUICK
FILE] key after touching the [OK] key so that the
[QUICK FILE] key is no longer highlighted.
"Document filing function" in chapter 7.
If the [FILE] key is greyed out, only the [QUICK
FILE] key can be selected.
When you touch the [QUICK FILE] key, a
message asking you to confirm the save will
appear. Touch the [OK] key in the message
screen and go to the next step.
If you wish to cancel the save, touch the [QUICK
FILE] key after touching the [OK] key so that the
[QUICK FILE] key is no longer highlighted.
9
Press the [START] key.
If you placed the original
on the document glass,
set the output to "Sort",
and pressed the
[START] key, you must
touch the [READ-END]
key after all pages of the
on the document glass,
set the output to "Sort",
and pressed the
[START] key, you must
touch the [READ-END]
key after all pages of the
original have been scanned. (Step 8 on page 4-
12)
12)
NOTE
If the auto paper select display does not appear, a
tray with the correct size of paper for the selected
ratio will not be automatically selected.
If the auto paper select display does not appear, a
tray with the correct size of paper for the selected
ratio will not be automatically selected.
5.
4
AUTO
AUTO
86%
B4
ORIGIN L
PAPER SELECT
COPY RATIO
EXPOSURE
A4
A4
To return the ratio to 100%
To return the ratio setting to 100%, touch the [COPY
RATIO] key to display the ratio menu and then touch
the [100%] key. (Steps 2 and 3 on page 4-16.)
To return the ratio setting to 100%, touch the [COPY
RATIO] key to display the ratio menu and then touch
the [100%] key. (Steps 2 and 3 on page 4-16.)
QUICK FILE
FILE
REDUCTION/ENLARGEMENT/ZOOM
4-18
XY ZOOM
The XY ZOOM feature allows the horizontal and vertical copy ratios to be changed separately. The ratios can set
from 25% to 400% in increments of 1%.
from 25% to 400% in increments of 1%.
Example: Selecting 100% for the length and 50% for the width
1
Place the original in the document feeder
tray or on the document glass. (pages 4-3
to 4-6)
tray or on the document glass. (pages 4-3
to 4-6)
2
Touch the [COPY RATIO] key.
3
Touch the [XY ZOOM] key.
4
Touch the [X] key.
The initial state of the [X]
key is selected
(highlighted), so this
step normally is not
necessary. Touch the
[X] key only if it is not
highlighted yet.
key is selected
(highlighted), so this
step normally is not
necessary. Touch the
[X] key only if it is not
highlighted yet.
5
Use the reduction, enlargement, and
ZOOM ([
ZOOM ([
], [
]) keys to change the
copy ratio in the horizontal (X) direction.
A fixed ratio key will not
become highlighted
when touched.
become highlighted
when touched.
Zoom ratios: Any ratio
from 25% to 400% can
be set in 1% increments.
from 25% to 400% can
be set in 1% increments.
Touch the [
] key to
increase the ratio, or the
[
[
] key to decrease
the ratio. (If you continue
to touch the [
]/[
] key, the ratio will change
automatically. After 3 seconds, the ratio will
change rapidly.)
change rapidly.)
6
Touch the [Y] key.
Original
Copy
NOTE
When the original is placed in the document feeder,
the ratio can be set from 25% to 200%.
When the original is placed in the document feeder,
the ratio can be set from 25% to 200%.
UTO
100%
4
PAPER SELECT
COPY RATIO
XY ZOOM
MENU
ZOOM
100
100
Y
X
NOTES
● Touch a reduction or enlargement key to set the
● Touch a reduction or enlargement key to set the
approximate ratio, then touch the [
] key to
increase the ratio or the [
] key to decrease the
ratio.
● Automatic changing of the ratio when a zoom key
is continuously touched can be disabled in the key
operator programs (see "Key operation setting
(prohibit key repeat)” on page 10 of the key
operator’s guide).
operator programs (see "Key operation setting
(prohibit key repeat)” on page 10 of the key
operator’s guide).
XY ZOOM
ZOOM
50%
10
Y
64%
ZOOM
50
100
Y
X
ZOOM
50
100
Y
X
REDUCTION/ENLARGEMENT/ZOOM
4-19
4
7
Use the reduction, enlargement, and
ZOOM ([
ZOOM ([
], [
]) keys to change the
copy ratio in the vertical (Y) direction.
A fixed ratio key will not
become highlighted
when touched.
become highlighted
when touched.
The zoom keys can be
used to change the ratio
from 25% to 400% in
increments of 1%.
If needed, you can touch
the [X] key once again to
readjust the X zoom.
used to change the ratio
from 25% to 400% in
increments of 1%.
If needed, you can touch
the [X] key once again to
readjust the X zoom.
8
Touch the [OK] key.
9
If needed, touch the [PAPER SELECT] key
and select the paper size.
and select the paper size.
If the AUTO PAPER
SELECT mode is on, the
appropriate copy paper
size will have been
automatically selected
based on the original
size and selected copy
ratios.
SELECT mode is on, the
appropriate copy paper
size will have been
automatically selected
based on the original
size and selected copy
ratios.
10
Select any desired copy settings such as
the exposure or number of copies, and
then press the [START] key.
the exposure or number of copies, and
then press the [START] key.
ZOOM
50%
50
70
Y
X
64%
70%
XY ZOOM
CANCEL
ZOOM
50
70
Y
A
OK
PA
400%
200%
100%
141%
AUTO
AUTO
X-50% Y-70%
ORIGINAL
PAPER SELECT
COPY RATIO
EXPOSURE
0
N
PLAIN
APER
N
PLAIN
5. A4
A4
To cancel an X or Y zoom setting...
Touch the [XY ZOOM] key or the [CANCEL] key in
the ratio selection screen (step 3 or 5 on page 4-18).
Touch the [XY ZOOM] key or the [CANCEL] key in
the ratio selection screen (step 3 or 5 on page 4-18).
4-20
SPECIAL PAPERS
Special papers including transparency film, postcards and tabbed paper must be fed through the bypass tray.
1
Place the original in the document feeder
tray or on the document glass. (pages 4-3
to 4-6)
tray or on the document glass. (pages 4-3
to 4-6)
2
Load the special paper in the bypass tray.
See page 2-8 for the
specifications of paper
that can be used in the
bypass tray.
For the paper loading
instructions, see
"Loading paper in the
bypass tray" (page 2-6).
specifications of paper
that can be used in the
bypass tray.
For the paper loading
instructions, see
"Loading paper in the
bypass tray" (page 2-6).
3
Touch the [PAPER SELECT] key.
4
Set the type and size of paper loaded in the
bypass tray.
bypass tray.
The (X) key shows the
currently selected
paper type.
currently selected
paper type.
The (Y) key shows the
size of paper loaded
in the bypass tray.
size of paper loaded
in the bypass tray.
To change the displayed paper type, touch the
(X) key before touching the (Y) key. When
loading paper, if you changed the paper size
from an AB size to an inch size (or from an inch
size to an AB size), or if you changed the paper
type, be sure to change the paper type and size
settings as explained in steps 5 to 7 on page 2-
10, and steps 8 to 10 on page 2-11.
(X) key before touching the (Y) key. When
loading paper, if you changed the paper size
from an AB size to an inch size (or from an inch
size to an AB size), or if you changed the paper
type, be sure to change the paper type and size
settings as explained in steps 5 to 7 on page 2-
10, and steps 8 to 10 on page 2-11.
5
Select the bypass tray.
6
Select any desired copy settings such as
the exposure or number of copies, and
then press the [START] key.
the exposure or number of copies, and
then press the [START] key.
When copying from the
document glass in the
sort mode using the
[START] key, touch the
[READ-END] key after
all originals have been
scanned (step 8 on page
4-12).
document glass in the
sort mode using the
[START] key, touch the
[READ-END] key after
all originals have been
scanned (step 8 on page
4-12).
UTO
AUTO
100%
A4
PAPER SELECT
OPY
EXPOSURE
4
AUTO
AUTO
100%
ORIGINAL
PAPER SELECT
COPY RATIO
EXPOSURE
0
N
HEAVY PAPER
APER
N
PLAIN
5. A4
A4
(X)
(Y)
1
2
3
AUTO
AUTO
100%
ORIGINAL
PAPER SELECT
COPY RATIO
EXPOSURE
0
N
HEAVY PAPER
PAPER
N
PLAIN
5. A4
A4
Click on the first or last page to see other AR-M620 (serv.man68) service manuals if exist.