DOWNLOAD Sharp AR-M620 (serv.man68) Service Manual ↓ Size: 5.25 MB | Pages: 127 in PDF or view online for FREE

The dual page copy function produces separate copies of two documents placed side by side on the document glass.
This function is especially useful when copying books and other bound documents.

[Example] Copying right and left pages of a book

The [DUAL PAGE
COPY] key will be
highlighted to indicate
that the function is
turned on, and the dual
page copy icon (

) will

appear in the upper left
of the screen.

You will return to the main screen of copy mode.

When copying a thick
book, press down lightly
on the book to flatten it
against the document
glass.

Place the opened original on the document glass so
that the first page you wish to copy is on the right and
the centre of the original is aligned with the size mark.

If A4 (8-1/2" x 11") size
paper is not selected,
touch the [PAPER
SELECT] key to select
A4 (8-1/2" x 11") size
paper.

●The dual page copy function can be used only

when copying from the document glass. The
automatic document feeder cannot be used with
this function.

●Only A4 (8-1/2" x 11") paper can be used.

Book original

Dual page copy

To display the special modes screen...
See "General procedure for using special
functions" on page 5-2.

RASE 

OK

1/3

DUAL PAGE

COPY

JOB

BUILD

TANDEM

COPY

Index

Centre line of
original

A4

This page
is copied
first.

8  "

 

x 11"

1  

/

  2

1  

/

  2

A4(8  " x 11")

1  

/

  2

(8  " x 14")

B4

B5

A3 (11" x 17")

About the steps that follow
For two-sided copying, follow steps 2 through 4
on page 4-13 and then follow steps 4 through 7
on page 4-12.
For one-sided copying, follow steps 4 through
7 on page 4-12.

To erase shadows caused by document binding, use
the edge erase function (page 5-4). (Centre Erase
and Edge + Centre Erase cannot be used in
combination.)

To cancel the dual page copy function, touch the
[DUAL PAGE COPY] key on the special modes
screen (screen of step 1).

PAPER SELECT

  AUTO

  A4

100%

The pamphlet copy function is used to arrange copies in proper order for eventual centre-stapling and folding into a
booklet. Two original pages are copied onto each side of copy paper. Four pages are, therefore, copied onto one sheet.
This function is convenient for arranging copies into an attractive booklet or pamphlet.

[Example] Copying eight originals in the pamphlet copy mode

● Scan the originals from the first page to the last

page. The order of copying will be automatically
adjusted by the machine.

● Either left binding (right to left turning) or right

binding (left to right turning) can be selected.

● Four originals will be copied onto one sheet.

Blank pages may be automatically produced at
the end depending on the number of the originals.

● If a saddle stitch finisher is installed, copies can

be stapled in two positions along the centre of
copies and folded at the centre.

The PAMPHLET COPY
setting screen will
appear. The pamphlet
copy icon (

, etc.) will

also appear in the upper
left corner of the screen
to indicate that the
function is turned on.

Select the [2-SIDED]
key if you wish to scan a
two-sided original using
the automatic document
feeding function.

If you wish to insert a different type of paper for use as
a cover, follow steps 4 through 12 below.

If you do not wish to insert paper for a cover, continue
from step 8 on the next page.

To make pamphlet copies of a book or other bound original, use the book copy function (page 5-25). The book
copy function scans the opened original in two-page units. (Two pages are scanned at each scan, reducing the
number of repetitions of the scanning operation by a half.)

Finished copies are
folded in two.

Originals 
(one-sided)

1

2

3

4

5

6

7

8

7

8

5

6

3

4

Originals 
(two-sided)

1

2

Left binding

Right binding

First page

First page

To display the special modes screen...
See "General procedure for using special
functions" on page 5-2.

SPECI L MODES

MARGIN SHIFT

PAMPHLET COPY

ERASE

JOB

BUILD

2-SIDED

ORIGINAL

1-SIDED

RIGHT

BINDING

C

SE

LEFT

BINDING

CANCEL

OK

RIGHT

BINDING

COVER

SETTING

NG

The currently selected

paper tray for the
cover is displayed.

The size and type of

paper in the currently
selected tray is
displayed.

In the example screen above, A4 (8-1/2" x 11")
size plain paper is loaded.

To change the paper tray for the cover, touch the
tray selection key. (In the screen example, the
"BYPASS TRAY" display is the tray selection key.)

The tray selection screen appears when the tray
selection key is touched. Select the desired tray in
this screen.

Return to the main
screen of copy mode.

To select another size
paper, select the desired
size and touch the
[AUTO IMAGE] key. The
appropriate copy ratio
will be selected
automatically based on

the original size and the paper size. (See steps 2
and 3 on page 4-15.)

Copying will start after all originals have been
scanned. (The next step is not needed.)

Replace the original with the next original and
press the [START] key. Repeat this operation until
all originals have been scanned and then touch
the [READ-END] key.

NOTES
● When the cover paper is fed from the inserter, the

cover cannot be copied on.

● Two-sided copying is not possible on label sheets,

transparency film, and tabbed paper. When
copying on a cover, do not select a tray that has
one of these types of paper.

NO

PRINT ON COVER

YES

CANCEL

OK

BYPASS

TRAY

PAPER TRAY

A4

PLAIN

1

2

CANCEL

OK

RIGHT

BINDING

COVER

SETTING

G

CANCEL

OK

OK

RIGHT

BINDING

COVER

SETTING

LEFT

BINDING

NOTES
● When the pamphlet copy function is set, the two-

sided copying mode will be automatically
selected.

● If this function is used in combination with the

pamphlet copy function (pamphlet stapling) and
the number of origial pages exceeds the number
of pages that can be stapled, a message asking
you to select "CANCEL", "CONTINUE", or
"DIVIDE" will appear.
To cancel the job, select "CANCEL". To make
pamphlet copies without stapling, select
"CONTINUE". To divide the pages into sets that
can be stapled, select "DIVIDE".
If you performed steps 4 to 6 to insert cover paper,
divided stapling is not possible. You can either
continue pamphlet copying without stapling, or
cancel the job.

To cancel the pamphlet copy function, touch the
[CANCEL] key on the pamphlet copy setting screen
(step 2).

PAPER SELECT

  AUTO

A3

100%

Use job build mode when you need to copy more original pages than can be loaded at once in the document feeder
(the maximum number of pages that can be loaded is 150). This function allows the original pages to be scanned in
sets.

[Example] Copying 300 pages of A4 originals

The [JOB BUILD] key
will be highlighted to
indicate that the function
is turned on, and the job
build icon (

) will

appear in the upper left
of the screen.)

Return to the main
screen of copy mode.

Scanning of originals will
start. After scanning of
the first set of originals (A
in the example above) is
completed, remove the
scanned originals, place
the next set of originals

(set B in the example) and press the [START] key.
Repeat this operation until all sets of originals have
been scanned.

Originals

*

Divide the originals into sets of 150 pages each. 

Scan the originals starting from the first page of set 
A. Scan set B next, taking care to keep the correct 
page order.

A:1

50 sheets

B:1

50 sheets

300 original pages

1

1

151

To display the special modes screen...
See "General procedure for using special
functions" on page 5-2.

ES

N SHIFT

LET COPY

ERASE

DUAL 

COP

JOB

BUILD

TANDE

COPY

RASE

OK

1/3

DUAL PAGE

COPY

JOB

BUILD

TANDEM

COPY

To cancel the job build function, touch the [JOB
BUILD] key on the special modes screen (step 1).
The highlighted display will be cancelled.

READ-END

PLACE NEXT ORIGINAL. PRESS [START].

WHEN FINISHED, PRESS [READ-END].