DOWNLOAD Sharp MX-1800N (serv.man36) Service Manual ↓ Size: 2.37 MB | Pages: 5 in PDF or view online for FREE

Model
MX-1800N (serv.man36)
Pages
5 Few pages! See other manuals at the bottom of the first or last page.
Size
2.37 MB
Type
PDF
Document
Service Manual
Brand
Device
Copying Equipment / Details of each Section - P Drive Section.
File
mx-1800n-sm36.pdf
Date
PREV: Sharp MX-1800N (serv.man35) Service Manual

Sharp MX-1800N (serv.man36) Service Manual ▷ View online

MX-1800N  DRIVE SECTION  P – 5
e. Paper feed clutch (Paper feed tray 2)
1) Remove the paper tray lift-up motor unit.
2) Remove the paper feed motor.
3) Remove the paper feed drive unit.
4) Remove the connection gear 21T. Remove the screws to
detach the drive frame upper unit.
5) Disconnect the connector, and remove the paper feed clutch
unit.
6) Remove the E-ring, and remove the paper feed clutch.
f. Tray vertical transport clutch
1)
Remove the paper tray lift-up motor unit.
2)
Remove the paper feed motor.
3)
Remove the paper feed drive unit.
4)
Remove the connection gear 21T. Remove the screws to
detach the drive frame upper unit.
5)
Remove the belt.
6)
Remove the connector, then remove the tray vertical transfer
clutch unit.
7)
Remove the E-ring, then remove the tray vertical transfer
clutch.
MX-1800N  DRIVE SECTION  P – 5
e. Paper feed clutch (Paper feed tray 2)
1) Remove the paper tray lift-up motor unit.
2) Remove the paper feed motor.
3) Remove the paper feed drive unit.
4) Remove the connection gear 21T. Remove the screws to
detach the drive frame upper unit.
5) Disconnect the connector, and remove the paper feed clutch
unit.
6) Remove the E-ring, and remove the paper feed clutch.
f. Tray vertical transport clutch
1)
Remove the paper tray lift-up motor unit.
2)
Remove the paper feed motor.
3)
Remove the paper feed drive unit.
4)
Remove the connection gear 21T. Remove the screws to
detach the drive frame upper unit.
5)
Remove the belt.
6)
Remove the connector, then remove the tray vertical transfer
clutch unit.
7)
Remove the E-ring, then remove the tray vertical transfer
clutch.
MX-1800N  DRIVE SECTION  P – 5
e. Paper feed clutch (Paper feed tray 2)
1) Remove the paper tray lift-up motor unit.
2) Remove the paper feed motor.
3) Remove the paper feed drive unit.
4) Remove the connection gear 21T. Remove the screws to
detach the drive frame upper unit.
5) Disconnect the connector, and remove the paper feed clutch
unit.
6) Remove the E-ring, and remove the paper feed clutch.
f. Tray vertical transport clutch
1)
Remove the paper tray lift-up motor unit.
2)
Remove the paper feed motor.
3)
Remove the paper feed drive unit.
4)
Remove the connection gear 21T. Remove the screws to
detach the drive frame upper unit.
5)
Remove the belt.
6)
Remove the connector, then remove the tray vertical transfer
clutch unit.
7)
Remove the E-ring, then remove the tray vertical transfer
clutch.
MX-1800N  DRIVE SECTION  P – 5
e. Paper feed clutch (Paper feed tray 2)
1) Remove the paper tray lift-up motor unit.
2) Remove the paper feed motor.
3) Remove the paper feed drive unit.
4) Remove the connection gear 21T. Remove the screws to
detach the drive frame upper unit.
5) Disconnect the connector, and remove the paper feed clutch
unit.
6) Remove the E-ring, and remove the paper feed clutch.
f. Tray vertical transport clutch
1)
Remove the paper tray lift-up motor unit.
2)
Remove the paper feed motor.
3)
Remove the paper feed drive unit.
4)
Remove the connection gear 21T. Remove the screws to
detach the drive frame upper unit.
5)
Remove the belt.
6)
Remove the connector, then remove the tray vertical transfer
clutch unit.
7)
Remove the E-ring, then remove the tray vertical transfer
clutch.
Page of 5
Display

Sharp MX-1800N (serv.man36) Service Manual ▷ Download

Found More:

MX-1800N (serv.man36) Service Manuals

Preview DownloadPagesSize
MX-1800N (serv.man6) Installation Manual Service Manual 88 21.98 MB
MX-1800N (serv.man7) Circuit Diagram Service Manual 127 17.88 MB
MX-1800N (serv.man8) Front Back Covers Service Manual 5 400.93 KB
MX-1800N (serv.man9) Note for Servicing Service Manual 2 226.95 KB
MX-1800N (serv.man10) Section 1 - Product Outline Service Manual 2 377.16 KB
MX-1800N (serv.man11) Section 2 - Specifications Service Manual 14 346.94 KB
MX-1800N (serv.man12) Section 3 - Consumable Parts Service Manual 2 207.25 KB
MX-1800N (serv.man13) Section 5 - External View Internal Structure Service Manual 17 1.47 MB
MX-1800N (serv.man14) Section 6 - Adjustments Service Manual 62 5.73 MB
MX-1800N (serv.man15) Section 7 - Simulation Service Manual 86 2.15 MB
MX-1800N (serv.man16) Section 8 - Self Diagnostics Trouble Codes Service Manual 24 553.93 KB
MX-1800N (serv.man17) Section 9 - Maintenance Service Manual 14 2.89 MB
MX-1800N (serv.man18) Section 10 - Rom Version Up Service Manual 3 551.22 KB
MX-1800N (serv.man19) Section 11 - Electrical Service Manual 32 546.84 KB
MX-1800N (serv.man20) Section 12 - Others Service Manual 7 570.47 KB
MX-1800N (serv.man21) Details of each Section - A External Outfit Section. Service Manual 3 1023.3 KB
MX-1800N (serv.man22) Details of each Section - B Operation Panel Section. Service Manual 3 577.88 KB
MX-1800N (serv.man23) Details of each Section - C Scanner Section. Service Manual 6 1.25 MB
MX-1800N (serv.man24) Details of each Section - D Manual Paper Feed Section. Service Manual 6 1.78 MB
MX-1800N (serv.man25) Details of each Section - E Tray Paper Feed Section Service Manual 7 2.93 MB
MX-1800N (serv.man26) Details of each Section - F Paper Transport Section Service Manual 4 1.08 MB
MX-1800N (serv.man27) Details of each Section - G Duplex Section Service Manual 5 2 MB
MX-1800N (serv.man28) Details of each Section - H LSU Section Service Manual 4 1.5 MB
MX-1800N (serv.man29) Details of each Section - i Photoconductor Section Service Manual 5 2.49 MB
MX-1800N (serv.man30) Details of each Section - J Toner Supply Section Service Manual 2 636.29 KB
MX-1800N (serv.man31) Details of each Section - K Developing Section Service Manual 5 1.61 MB
MX-1800N (serv.man32) Details of each Section - L Transfer Section Service Manual 9 8.24 MB
MX-1800N (serv.man33) Details of each Section - M Process Control Sensor, Registration Sensor Section Service Manual 2 545.41 KB
MX-1800N (serv.man34) Details of each Section - N Fusing Section Service Manual 6 2.73 MB
MX-1800N (serv.man35) Details of each Section - O Paper Exit Section. Service Manual 4 2.22 MB
MX-1800N (serv.man37) Details of each Section - Q PWB Section. Service Manual 6 1.65 MB
MX-1800N (serv.man38) Details of each Section - R Fan and Filter Section. Service Manual 2 687.11 KB
MX-1800N (serv.man39) Details of each Section - S Sensor, Switch section. Service Manual 2 472.23 KB
MX-1800N (serv.man40) User's Guide (Supplied as pdf file on m c's Hard Disk Drive). User Manual / Operation Manual 61 2.11 MB
MX-1800N (serv.man41) System Settings Guide (Supplied as pdf file on m c's Hard Disk Drive). User Manual / Operation Manual 127 2.61 MB
MX-1800N (serv.man42) Scanner Guide (Supplied as pdf file on m c's Hard Disk Drive). User Manual / Operation Manual 127 3.27 MB
MX-1800N (serv.man43) Printer Guide (Supplied as pdf file on m c's Hard Disk Drive). User Manual / Operation Manual 61 1.88 MB
MX-1800N (serv.man44) Fax Guide (Supplied as pdf file on m c's Hard Disk Drive). User Manual / Operation Manual 127 4.25 MB
MX-1800N (serv.man45) Copier Guide (Supplied as pdf file on m c's Hard Disk Drive). User Manual / Operation Manual 127 4.88 MB
MX-1800N (serv.man46) Document Filing Guide (Supplied as pdf file on m c's Hard Disk Drive). User Manual / Operation Manual 47 1.17 MB
MX-1800N Mac OS10.8 Driver Rquires Postscript option. Mac OS Drivers 2.94 MB
MX-1800N (serv.man5) Section 2 - Specifications Service Manual / Specification 14 346.94 KB
MX-1800N (serv.man52) Parts change for productivity improvement. Service Manual / Technical Bulletin 3 184.15 KB
MX-1800N (serv.man53) Design change of MF Tray 2 Upper. Service Manual / Technical Bulletin 2 216.35 KB
MX-1800N (serv.man54) Preventing detection of waste toner bottle full. Service Manual / Technical Bulletin 2 101.04 KB
MX-1800N (serv.man55) Temporary change in containment bag for starting powder. Service Manual / Technical Bulletin 1 102.62 KB
MX-1800N (serv.man56) Starting Powder List (This list takes priority over information in Service Manuals). Service Manual / Technical Bulletin 4 66.25 KB
MX-1800N (serv.man57) Material change Rotation Plate Sheet. Service Manual / Technical Bulletin 3 290.1 KB
MX-1800N (serv.man58) Recommended shutdown procedure and Power Cycling of MFD Service Manual / Technical Bulletin 1 186.43 KB
MX-1800N (serv.man59) IMPORTANT Handling of EEPROM's. Service Manual / Technical Bulletin 5 203.32 KB
MX-1800N (serv.man60) Change in material of pick up roller. Service Manual / Technical Bulletin 2 77.2 KB
MX-1800N (serv.man61) CCE-1306 A REMINDER TO INSERT CONNECTORS TO DRIVER PWB COMPLETELY Service Manual / Technical Bulletin 2 237.57 KB
MX-1800N (serv.man62) CCE-1286 COUNTERMEASURE FOR NOISE FROM TN PIPE BK UNIT Service Manual / Technical Bulletin 2 126.49 KB
MX-1800N (serv.man63) CHANGE OF PHOTO SENSOR. Service Manual / Technical Bulletin 2 165.18 KB
MX-1800N (serv.man64) CCE-1076 WHITE STREAK S DUE TO THE DOCTOR COVER SEAL OR INNER BLADE WEAR. Service Manual / Technical Bulletin 3 280.8 KB
MX-1800N (serv.man65) CHANGE OF MICROSWITCH RSPF-DSPF SWITCH Service Manual / Technical Bulletin 3 146.49 KB
MX-1800N (serv.man66) PREVENTION OF F2-6 ERROR. TONER CARTRIDGE DRIVE AND STORAGE NOTES. Service Manual / Technical Bulletin 3 154 KB
MX-1800N (serv.man67) IMPROVEMENTS FOR THE PREVENTION OF LEAKING FROM THE PROCESS ELECTRODE COVER Service Manual / Technical Bulletin 2 57.54 KB
MX-1800N (serv.man68) TRANSPORT JAM FROM THE OPTION DESK. (PPD1_S3 etc.) Service Manual / Technical Bulletin 2 71.46 KB
MX-1800N (serv.man69) COUNTERMEASURES FOR THE 2ND TRANSFER DRIVING PULLEY BELT COMING LOOSE Service Manual / Technical Bulletin 2 88.41 KB
MX-1800N (serv.man70) REMOVAL OF LCD MYLAR A B DUE TO CHANGES TO THE 8.1 TOUCH PANEL Service Manual / Technical Bulletin 1 27.59 KB
MX-1800N (serv.man71) STRENGTH INCREASE TO BEADED PART OF THE 2ND TRANSFER BELT Service Manual / Technical Bulletin 1 72.96 KB
MX-1800N (serv.man72) IMPROVEMENTS TO THE TRANSPORT ROLLER POWER OF THE 2ND CASSETTE PAPER FEED UNIT Service Manual / Technical Bulletin 2 183.83 KB
MX-1800N (serv.man73) INCREASE IN VERTICAL TRANSFERABILITY MARGIN OF RIGHT LOWER DOOR Service Manual / Technical Bulletin 2 110.47 KB
MX-1800N (serv.man74) FIX TO INCREASE THE MARGIN THAT THE FAN MOTOR FASTENER WILL NOT BECOME STRIPPED Service Manual / Technical Bulletin 2 49.07 KB
MX-1800N (serv.man75) SUPPORT AGAINST SCUFFING THE PHOTORECEPTOR DRUM WHEN PULLING OUT THE DV UNIT Service Manual / Technical Bulletin 2 124.72 KB
MX-1800N (serv.man76) FIX FOR THE ABNORMAL NOISE (CLICKING) CREATED BY THE FUSING UNIT UPPER HEAT ROLLER RECEIVER Service Manual / Technical Bulletin 2 75.17 KB
MX-1800N (serv.man77) MXDEX2 - COUNTERMEASURES FOR DPFD2_S, etc. CAUSED BY CARRYING FORCE DECREASE BECAUSE OF PAPER POWDERS Service Manual / Technical Bulletin 1 26.09 KB
MX-1800N (serv.man78) DAMAGE ON DRUM SURFACE CAUSED WHEN DV UNIT IS PULLED OUT Service Manual / Technical Bulletin 2 154.79 KB
MX-1800N (serv.man79) H4-30 ERROR CAUSED BY INSUFFICIENT CRIMPING AT THE TS-HL MAIN HARNESS FASTEN TERMINAL AT THE TOP OF THE FUSING UNIT Service Manual / Technical Bulletin 2 84.74 KB
MX-1800N (serv.man80) ISSUING EXPLANATORY MATERIAL OF JOB LOG CODES. Service Manual / Technical Bulletin 13 160.14 KB
MX-1800N (serv.man81) JAM (APPD1_N) RESULTING FROM ADU FOLLOWER ROLLER SPRING COMING-OFF Service Manual / Technical Bulletin 2 119.64 KB
MX-1800N (serv.man82) CHANGE OF SHAPE OF PROCESS F COVER Service Manual / Technical Bulletin 2 44.85 KB
MX-1800N (serv.man83) L4-31 TROUBLE CODE OCCURRENCE Service Manual / Technical Bulletin 2 44.8 KB
MX-1800N (serv.man84) IMPROVEMENT FOR PRECISION OF DETECTING BEING FULL OF WASTE TONER Service Manual / Technical Bulletin 2 45.22 KB
MX-1800N (serv.man85) STRIPE PRINTING IN DRUM AXIS DIRECTION RESULTING FROM CLOUDY POLYGON MIRROR IN LSU Service Manual / Technical Bulletin 1 27.89 KB
MX-1800N (serv.man86) CONTAMINATION OF WHITE CALIBRATION SHEET ON SPF GLASS UNIT Service Manual / Technical Bulletin 2 67.26 KB
MX-1800N (serv.man87) HANDLING TROUBLE CODE F2-40 INVOLVING LEAK FROM PROCESS ELECTRODE Service Manual / Technical Bulletin 2 129.97 KB
MX-1800N (serv.man88) PAPER FEED JAM (DPFD1_N4, ETC.) Service Manual / Technical Bulletin 2 67.87 KB
MX-1800N (serv.man89) BREAKAGE OF PAPER EMPTY ACTUATOR Service Manual / Technical Bulletin 2 76.68 KB
MX-1800N (serv.man90) INCORRECT DETECTION OF WASTE TONER BOX FULL Service Manual / Technical Bulletin 3 132.89 KB
MX-1800N (serv.man91) COUNTERMEASURES FOR F2-40 TROUBLE Service Manual / Technical Bulletin 2 85.71 KB
MX-1800N (serv.man92) COUNTERMEASURE TO COPE WITH L4-06 TROUBLE,AND OR YELLOW COLOUR DROPPING OUT Service Manual / Technical Bulletin 2 101.91 KB
MX-1800N (serv.man93) IMPROVEMENT OF IMAGE UNEVENNESS Service Manual / Technical Bulletin 2 81.7 KB
MX-1800N (serv.man94) IMPROVEMENT OF E7-11 SHADING TROUBLE. Service Manual / Technical Bulletin 2 92.88 KB
MX-1800N (serv.man95) REPLACEMENT OF UPPER HEAT ROLLER. Service Manual / Technical Bulletin 2 78.58 KB
MX-1800N (serv.man96) STRENGTHENING THE SPRING ATTACHMENT HOLE OF TENSION HOLDER A ON RSPF. Service Manual / Technical Bulletin 1 76.72 KB
MX-1800N (serv.man97) REMEDY FOR OPC LAYER S PEELING-OFF Service Manual / Technical Bulletin 2 107.4 KB
MX-1800N (serv.man98) INFORMATION OF OPERATION PROCEDURE FOR REPLACING THE MFP BOARD Service Manual / Technical Bulletin 2 59.18 KB
MX-1800N (serv.man99) REDUCING UNEVEN CHARGE (IMAGE STREAKING) Service Manual / Technical Bulletin 2 80.43 KB
MX-1800N (serv.man100) IMPROVEMENT OF UPPER HEAT ROLLER AGAINST WRINKLE. Service Manual / Technical Bulletin 1 74.31 KB
MX-1800N (serv.man101) CPFD2 JAMMING (OR OTHER) OCCURS FROM MISSING TRANSPORT LOWER GEAR PULLEY. Service Manual / Technical Bulletin 2 100.59 KB
MX-1800N (serv.man102) Staple cartridge As Service Part Service Manual / Technical Bulletin 1 45.97 KB
MX-1800N (serv.man103) ROM Upgrade Service Manual / Technical Bulletin 3 39.21 KB
MX-1800N (serv.man104) COUNTER MEASURES FOR WASTE TONER AGITATION SHAFT DEVIATION IN WASTE TONER BOTTLE Service Manual / Technical Bulletin 2 150.96 KB
MX-1800N (serv.man105) IMPROVEMENT IN FULL DETECT LEVER RETURN PERFORMANCE Service Manual / Technical Bulletin 2 85.02 KB
MX-1800N (serv.man106) CHANGE OF RSPF HEIGHT AJDUSTMENT METHOD Service Manual / Technical Bulletin 1 17.48 KB
MX-1800N (serv.man107) STRENGTH IMPROVEMENT OF THE OUTPUT AXIS GEAR OF THE LIFT MOTOR A Service Manual / Technical Bulletin 2 81.6 KB
MX-1800N (serv.man108) CHANGE OF THE MEMORY PWB ATTACHING PROCEDURE TO THE MFP PWB Service Manual / Technical Bulletin 1 17.74 KB
MX-1800N (serv.man109) 001-NEW SET OF SERVICE PARTS THAT COMBINES THE FILTER COVER WITH TONER FILTER. Service Manual / Technical Bulletin 1 64.34 KB
MX-1800N (serv.man50) Pastel Light Combined Firmware Version E1.19.L0.a0 Driver / Update 24.96 MB
MX-1800N (serv.man51) (For use with DSK only) Driver / Update 25.15 MB
MX-1800N (serv.man2) NEW EEPROM Programming Request Form Handy Guide 3 333.07 KB
MX-1800N (serv.man3) GENERAL PROCEDURE FOR COLOUR CALIBRATION SET-UP Handy Guide 2 83.06 KB
MX-1800N (serv.man4) August 2007 Version 4 revised handy guide (Includes pastel light, Pastel and C-Jupiter) Handy Guide 53 1 MB
MX-1800N (serv.man47) How To Read A Main Machine Serial Number FAQ 1 16.5 KB
MX-1800N (serv.man48) UPDATED PJL PCL PS Command Lists FAQ 128.83 KB
MX-1800N (serv.man49) How to connect MX colour product to Linux UNIX systems using CUPS FAQ 9 1.45 MB

RANDOM: