Sharp MX-1800N (serv.man103) Service Manual / Technical Bulletin ▷ View online
Sharp Electronics (UK) Ltd., Technical Services Group
CCE543
1. Model Name: MX-1800N
2. Description:
ICU (PROGRAM/BOOT), PCU, SCU-ROM, and e-instruction manual upgrade
From December 2007 production
ROM
control
No.
ICU
(PROGRAM
)
ICU
(BOOT)
PCU SCU
IMAGE
DATA
FAX
e-
Manual
B11 E117L0
E117L0
E101L0
0101L0
0103P0
010400
0210L0
* ICU BOOT above is the version described in the ROM management label. Check that
the actual version is:
ICU(BOOT): 01.01.00/LANGUAGE: 01.56.00/GRAPHIC:
01.06.00
(Sim22-5).
1. Changed items for each ROM upgrade: See the accompanying sheet.
2. Description of e-instruction manual
1) Scanner guide
• The size of paper described in the second line of “Specifying the size by entering
numerical values.” on pages 37, 56 and 70 will be changed as follows:
Before change: The width can be from 64 mm to 432 mm (2-1/2" to 17"),
Before change: The width can be from 64 mm to 432 mm (2-1/2" to 17"),
and the length can be from 64 mm to 297 mm (2-1/2" to 11-
5/8").
After change:
The width can be from 50 mm to 432 mm (2" to 17"),
and the length can be from 50 mm to 297 mm (2" to 11-5/8").
• Along with the change above, the description of the display size of No. 3 on
pages 37, 56 and 70 will be changed in the same manner as above.
2) Fax guide
• “Minimum original size” described in the third line of the table “TRANSMITTABLE
ORIGINAL SIZES” on page 16 will be changed as follows:
Before change: 64 mm (width) x 64 mm (length)
Before change: 64 mm (width) x 64 mm (length)
(2-5/8" (width) x 2-5/8" (length))
After change: 50 mm (width) x 50 mm (length)
(2" (width) x 2" (length))
• The description of the display size of No.4 of “Specifying the size with
numbers” on page 32 will be changed as follows:
Before change:
Before change:
X: (64
432) mm, Y: (64
297) mm
After change: X: (50
432) mm, Y: (50
297) mm
ROM Version Combination History Table
ROM Upgrade
Date:
17
th
January 2008
Model:
MX1800
Ref.:
007
Colour:
White
Page:
1 of 3
TECHNICAL BULLETIN
No.
ROM
administration
ICU PCU SCU
IMAGE
DATA
FAX
e-Manual
Action
Issued
T/R No.
(1)
B00
E116L0 E100L0 0100L0 0103P
0
010400
0200L0
2007/
8
CCE-
493
Description
No
.
Subject Description
1
Image send-
related
related
Minimum scanning area of irregular size for image sending has been modified.
Destination (AB type): [Before change] 64mm
[After change] 50mm
Destination (Inch type): [Before change] 64mm
[After change] 50mm
2 Additional
function
[Prohibiting blank printing] mode has been added to the following:
[System setting (Administrator login)]
[Prohibition setting]
[Printer
environment setting]
3 Printer-related
Printing a web screen in fast mode and in colors on the standard browser
(Safari) of MacOSX (10.4.7) may result in printing of unusual tones
(excessively dense). This error has been corrected.
(Safari) of MacOSX (10.4.7) may result in printing of unusual tones
(excessively dense). This error has been corrected.
4 Printer-related
When PDF file having specific type of image (overlapping images) is printed, it
may result in an error of printing overlapping background that does not appear
on screen. This error has been corrected.
may result in an error of printing overlapping background that does not appear
on screen. This error has been corrected.
5 Printer-related
Printing a data file having large capacity on AutoCAD required excessive
amount of time. Printing speed has been improved.
amount of time. Printing speed has been improved.
6 Printer-related
When “Time of maintenance” is displayed, a MIB value on MFP is
“hrDeviceStatus = Down, hrPrinterStatus = other” (According to
specifications). If the Standard TCP/IP port on Windows receives the MIB
value, the spooler may be placed under “offline” status and sending print data
may be disabled. Against this error, Valid/Invalid setting of maintenance
notice by MIB has been added to controller software SW.
“hrDeviceStatus = Down, hrPrinterStatus = other” (According to
specifications). If the Standard TCP/IP port on Windows receives the MIB
value, the spooler may be placed under “offline” status and sending print data
may be disabled. Against this error, Valid/Invalid setting of maintenance
notice by MIB has been added to controller software SW.
Controller software SW (Sim55-3)
SW. No.9 DATA:5
0:Valid (default value) You cannot print because “Time of maintenance” is
informed.
1:Invalid You can print because “Time of maintenance” is not informed.
7 Printer-related
Printing on MacOS10.3.9 and Illustrator 10 may result in PS error or garbled
characters. This error has been corrected.
characters. This error has been corrected.
8
Fixing motor
control-related
control-related
If shut-off status continues for a long time, a miniscule rotation is provided to
upper and lower fixing rollers at a timing of date changes (0:00) to prevent
deformation (flat spot) of pressing part. This control has been added.
upper and lower fixing rollers at a timing of date changes (0:00) to prevent
deformation (flat spot) of pressing part. This control has been added.
9
Scan to Network
folder-related
folder-related
In Scan to Network folder function, data transmission to a folder specified by
Netware was disabled. This error has been corrected.
Netware was disabled. This error has been corrected.
Sharp Electronics (UK) Ltd., Technical Services Group
CCE543
10
Internet Fax-
related
related
If a transmission error occurs in sending a delivery acknowledgment in
response to delivery acknowledge request when receiving internet fax,
transmission after the error may be disabled. This error has been corrected.
response to delivery acknowledge request when receiving internet fax,
transmission after the error may be disabled. This error has been corrected.
11 Internet Fax-
related
Setting of allowing/disallowing size selection upon receiving internet fax has
been added to fax software SW. *Only valid on a AB type machine unit only.
been added to fax software SW. *Only valid on a AB type machine unit only.
Fax software SW (Sim66-1)
SW.No.75 DATA: 1, 2
00: Selection among B5/A4/B4/A3 (default value: Same operation as current
setting)
01: Selection among A4/B4/A3
10: Selection between A4/A3
11: Selection between A4/B4
10: Selection between A4/A3
11: Selection between A4/B4
12
OSA external
authentication -
related
authentication -
related
OSA external authentication was disabled under low network conditions. This
error has been corrected.
error has been corrected.
Sharp Electronics (UK) Ltd., Technical Services Group
CCE543
Display