DOWNLOAD Sharp UP-800 (serv.man32) Service Manual ↓ Size: 5.14 MB | Pages: 68 in PDF or view online for FREE

Model
UP-800 (serv.man32)
Pages
68
Size
5.14 MB
Type
PDF
Document
User Manual / Operation Manual
Brand
Device
ECR / UP-800 In-Line (IRC) Instruction Manual
File
up-800-sm32.pdf
Date
PREV: Sharp UP-800 (serv.man31) User Manual / Operation Manual

Sharp UP-800 (serv.man32) User Manual / Operation Manual ▷ View online

POS TERMINAL
INTER-REGISTER
COMMUNICATION SYSTEM
INSTRUCTION MANUAL
UP-800F
UP-810F
MODEL
1
TABLE OF CONTENTS
Introduction ·············································································································································3
Inline Operation ·······································································································································4
1. Message display·····································································································································4
(1) Message displayed during inline communication··············································································4
(2) Error messages·································································································································5
2. Open store operation (OPXZ mode) – master and satellite ···································································6
3. Close store operation (OPXZ mode) – master and satellite ···································································7
4. Clerk system···········································································································································8
(1) Centralized clerk file system ·············································································································8
(2) Individual clerk file system ················································································································9
5. Sign-on operation (clerk assignment) (REG mode/MGR mode) ··························································10
6. Clerk sign-on report ······························································································································11
7. Sign-off operation (cancellation of clerk assignment) (REG mode/MGR mode) ··································12
8. Downloading the contents of the programming to satellites – master ··················································13
(1) Initial downloading···························································································································13
(2) Maintenance downloading ··············································································································14
9. Look-up and updating of the GLU file···································································································17
(1) Centralized GLU file system············································································································17
(2) Individual GLU file system···············································································································17
10. PLU/EAN stock control ·························································································································18
11. T-LOG polling ·······································································································································19
12. PLU/EAN data control ··························································································································20
13. Price change function ···························································································································22
14. Customer data control ··························································································································22
15. Communication with a remote printer (option)······················································································23
16. Rerouting print data ······························································································································24
Consolidated and Individual Reports··································································································25
1. Operating modes ··································································································································25
2. Consolidated reports – master/back-up master····················································································26
(1) Report generation procedure ··········································································································26
(2) List of consolidated reports (SYSTEM READING/RESETTING) ····················································27
3. Individual reports – master/back-up master/satellite ············································································29
(1) Report generation procedure ··········································································································29
(2) List of individual reports (READING/RESETTING) ·········································································30
4. Resetting reports in a system with no save file ····················································································32
5. Clerk report···········································································································································33
(1) Centralized clerk file system ···········································································································33
(2) Individual clerk file system ··············································································································34
6. Cashier report·······································································································································35
7. Reports that can be generated when the Compulsory Cash/Check Declaration (CCD) function is
enabled ·················································································································································36
8. Reset clear operation (X1/Z1 and X2/Z2 modes) – master ··································································37
2
1
2
IRC Programming··································································································································38
1. Setting the machine numbers – master and satellite············································································38
2. Setting the terminal numbers (IRC machine numbers) for satellites ····················································39
3. Initial setting for the master and master list creating/updating ·····························································40
(1) Setting the terminal number for the master and creating the master list·········································40
(2) Deleting a machine from the master list··························································································41
4. Specifying the terminal to serve as a back-up master – master···························································42
5. Specifying whether to enable or disable the system retry function when a transmission error occurs –
master and satellite ······························································································································43
6. Choosing whether to search the master or satellite first for the PLU/EAN code – satellite ··················44
7. Reading the contents of the IRC programming – master and satellite ·················································45
8. Programming for the remote printer ·····································································································47
(1) Basic programming for the remote printer – master and satellite ···················································47
(2) Optional programming for the remote printer – master and satellite···············································49
9. Programming for the Manager Work Station (MWS) – master and satellite·········································51
(1) Programming of the MWS terminal number····················································································51
(2) Programming of the time-out time···································································································52
(3) Programming of the gateway number ·····························································································52
10. Reading the contents of the Manager Work Station (MWS) programming – master and satellite ·······53
System Back-Up ····································································································································54
1. How the IRC back-up system works·····································································································54
2. Master declaration ································································································································55
(1) When the master breaks down – Master declaration at the back-up master ··································55
(2) When the back-up master breaks down – Master declaration at the master ··································57
3. Recovery declaration····························································································································58
(1) When the master recovers from a breakdown – Recovery declaration at the back-up master·······58
(2) When the back-up master recovers from a breakdown – Recovery declaration at the master·······60
Error Recovery ······································································································································61
1. Manual clear operation ·························································································································61
(1) Manual clearing procedure··············································································································61
(2) List of manual clearing items···········································································································62
2. System retry function····························································································································63
(1) When the system retry function is disabled·····················································································63
(2) When the system retry function is enabled ·····················································································64
BASIC SPECIFICATIONS for LAN········································································································65
6
5
4
3
Page of 68
Display

Sharp UP-800 (serv.man32) User Manual / Operation Manual ▷ Download

  • DOWNLOAD Sharp UP-800 (serv.man32) Service Manual ↓ Size: 5.14 MB | Pages: 68 in PDF or view online for FREE
  • Here you can View online or download the User Manual / Operation Manual for the Sharp UP-800 (serv.man32) in PDF for free, which will help you to disassemble, recover, fix and repair Sharp UP-800 (serv.man32) ECR. Information contained in Sharp UP-800 (serv.man32) User Manual / Operation Manual (repair manual) includes:
  • Disassembly, troubleshooting, maintenance, adjustment, installation and setup instructions.
  • Schematics, Circuit, Wiring and Block diagrams.
  • Printed wiring boards (PWB) and printed circuit boards (PCB).
  • Exploded View and Parts List.

Found More:

UP-800 (serv.man32) Service Manuals

Preview DownloadPagesSize
UP-800 (serv.man25) UP-800 810 Service Manual Service Manual 86 12.92 MB
UP-800 (serv.man18) UP-800 Series Enhancement ROM (V1.70) Program Operation Manual (This manual contains details on the enhanced features) Service Manual 16 1.2 MB
UP-800 (serv.man17) for spare part numbers refer to the seperate parts guide manual. Service Manual 14 489.45 KB
UP-800 (serv.man19) Latest UP820 Service Manual Service Manual 89 9.04 MB
UP-800 (serv.man20) ER-03DWB, ER-05DWB Cash Drawer service manual including parts guide Service Manual 7 198.26 KB
UP-800 (serv.man21) UP-800 Series Enhancement ROM (V1.6x) Program Operation Manual (This manual contains details on the enhanced features including some Orderman enhancements) Service Manual 13 701.88 KB
UP-800 (serv.man22) UP-800 Series Enhancement ROM (V1.5x) Program Operation Manual (This manual contains details on the enhanced features it does not include Orderman features) Service Manual 10 133.92 KB
UP-800 (serv.man23) UP-820N, UP-820F Service Manual Service Manual 88 8.1 MB
UP-800 (serv.man24) UP-820N, UP-820F Program Manual Service Manual 60 903.1 KB
UP-800 (serv.man26) UP-800, UP-810 Program Manual Service Manual 62 724.52 KB
UP-800 (serv.man30) UP-820F Operation Manual User Manual / Operation Manual 127 5.59 MB
UP-800 (serv.man31) UP-820N Operation Manual User Manual / Operation Manual 127 5.53 MB
UP-800 (serv.man33) UP-800 810 Reports Manual (This manual contains Sales Reports and Program Reports samples) User Manual / Operation Manual 82 3.52 MB
UP-800 (serv.man34) UP-800, UP-810 Operation Manual User Manual / Operation Manual 127 6.73 MB
UP-800 (serv.man27) UP-810 internal printer (LT-1320CS)Parts Guide Service Manual / Parts Guide 1 36.37 KB
UP-800 (serv.man28) UP-820 Parts Guide Service Manual / Parts Guide 22 1.51 MB
UP-800 (serv.man29) UP-800, UP-810 Parts Guide Service Manual / Parts Guide 20 1.64 MB
UP-800 (serv.man84) UP800 Series T Bulletin. Terminals Freezing when using Channel 2 for Scanner Service Manual / Technical Bulletin 1 17 KB
UP-800 (serv.man73) UP-800 series touch panel part number Service Manual / Technical Bulletin 1 59.7 KB
UP-800 (serv.man74) UP-811, 820F loose cash drawer solenoids. Service Manual / Technical Bulletin 1 209.07 KB
UP-800 (serv.man75) UP820 SSP-082 (ROM V1.03b only)- This SSP will disable the SCM, , SCM- on the UP-800 Service Manual / Technical Bulletin 2 36.82 KB
UP-800 (serv.man76) UP820 SSP-081 (ROM V1.05 only)- This SSP will disable the SCM, , SCM- on the UP-800 Service Manual / Technical Bulletin 2 35.93 KB
UP-800 (serv.man77) This SSP will eliminate the rare phenomenon of Juddering Print on the UP-820 Service Manual / Technical Bulletin 2 36.27 KB
UP-800 (serv.man78) This SSP will eliminate the rare phenomenon of Juddering Print on the UP-810 Service Manual / Technical Bulletin 2 36.27 KB
UP-800 (serv.man79) UP800 SSP-109 (ROM V1.64 only) Please install to resolve following problem -, Break Error after Vat Shift, Item Discount Service Manual / Technical Bulletin 2 37.23 KB
UP-800 (serv.man80) UP800 SSP-108 (ROM V1.64 only) Please install to resolve following problem -, Incorrect Error message, CCD Not Done Service Manual / Technical Bulletin 2 37.06 KB
UP-800 (serv.man81) UP800 SSP-107 (ROM V1.64 only) Please install to resolve following problem -, Incorrect employee information in the employee transaction file Service Manual / Technical Bulletin 6 47.58 KB
UP-800 (serv.man82) Release of Paper Guide to prevent paper feed problems caused by operator pulling out receipt before correct completion of issue. Service Manual / Technical Bulletin 7 5.92 MB
UP-800 (serv.man83) UP800 SSP-001 (ROM V1.02 only), Please install to resolve following two problems, 1. Terminal Freeze if using Scanner on CH2 on In-Line system., 2. Intermittent Drawer failure Service Manual / Technical Bulletin 3 77.27 KB
UP-800 (serv.man58) UP810LG1.ini and UP810LG2.ini files for Rom Version 1.01, 1.03b need to be placed in the LOGO Converter install folder to enable 90 dots high HEADER LOGO and 130 high FOOTER LOGO Driver / Update 870 B
UP-800 (serv.man64) UP-800 series Main ROM Version 1.03B(Self extracting file, can be loaded via POSUtilityTool4.exe) Create an All RAM backup and remove any existing SSP's before upgrading Driver / Update 1.86 MB
UP-800 (serv.man57) UP810LG1.ini and UP810LG2.ini files for Rom Version 1.01, 1.03b need to be placed in the LOGO Converter install folder to enable 130 dots high HEADER LOGO and 130 high FOOTER LOGO Driver / Update 871 B
UP-800 (serv.man56) UP810LG1.ini and UP810LG2.ini files for Rom Version 1.50, 1.60 need to be placed in the LOGO Converter install folder to enable 90 dots high HEADER LOGO and 130 high FOOTER LOGO Driver / Update 870 B
UP-800 (serv.man55) UP810LG1.ini and UP810LG2.ini files for Rom Version 1.50, 1.60 need to be placed in the LOGO Converter install folder to enable 130 dots high HEADER LOGO and 130 high FOOTER LOGO Driver / Update 871 B
UP-800 (serv.man54) UP-800 Orderman ROM V1.62 This ROM version is based on V1.52 with additional Orderman enhancements and other features. (Do NOT use with V1.51 1.03 1.02 program data with this version) Driver / Update 2.04 MB
UP-800 (serv.man53) UP-800 Version History 1.62 (This document contains all the specification changes and Bug fixes upto version 1.62) Driver / Update 6 69.14 KB
UP-800 (serv.man52) Launch Demo Program All RAM DATA coverted to work with Rom V1.62, Extract Zip file to SD card and load using SD CARD MODE with Folder code 10022009 Driver / Update 55.53 KB
UP-800 (serv.man51) UP-800 Enhanced ROM V1.64 This ROM version is based on V1.62 with additional Orderman enhancements and other features. (Do NOT use with V1.51 1.03 1.02 1.62 program data with this version) Driver / Update 2.05 MB
UP-800 (serv.man50) UP-800 Version History 1.64 (This document contains all the specification changes and Bug fixes upto version 1.64) Driver / Update 10 848.16 KB
UP-800 (serv.man59) Documentation for downloading Graphic Logo image to UP-810 (Updated to include rom versions 1.60) Driver / Update 8 170.96 KB
UP-800 (serv.man60) Screen Shot Tool Software. (Software and Installation Operation instructions, to allow screen shots to be taken of the UP-800 LCD screen from PC) Driver / Update 1.11 MB
UP-800 (serv.man61) Software Utility for downloading Graphic Logo to UP-820 integral printer Driver / Update 1.7 MB
UP-800 (serv.man62) UP-800 Orderman ROM V1.51 This ROM version is based on V1.03 with additional Orderman and other features. (Do NOT use 1.03 1.02 program data with this version) Driver / Update 2.35 MB
UP-800 (serv.man63) UP-800 Version History 1.03B (This document contains all the specification changes and Bug fixes upto version 1.03B) Driver / Update 4 49.05 KB
UP-800 (serv.man65) POS Utility Tool V4 (Required for downloading ROM image via PC) Driver / Update 27.75 KB
UP-800 (serv.man68) Sample logo image 90 dots x 576 dots graphical logo. Driver / Update 975 B
UP-800 (serv.man67) Sample logo image 130 dots x 576 dots graphical logo Driver / Update 1.3 KB
UP-800 (serv.man66) Retail Launch Demo Program (8000 products) All RAM DATA, Extract Zip file to SD card and load using SD CARD MODE with Folder code 09102007 Driver / Update 359.57 KB
UP-800 (serv.man48) UP-800 series Main ROM Version 1.05(Extract the ROM file from the zip), can be loaded via POSUtilityTool4.exe) Create an All RAM backup and remove any existing SSP's before upgrading. V1.05 data is compatible with V1.04, V1.03 and V1.03B data. Driver / Update 1.85 MB
UP-800 (serv.man72) Launch Demo Program Keysheet in Excel format. Driver / Update 11.76 KB
UP-800 (serv.man71) Launch Demo Program All RAM DATA, Extract Zip file to SD card and load using SD CARD MODE with Folder code 13092007 Driver / Update 56.45 KB
UP-800 (serv.man70) ER02FD Utility for uploading and Downloading RAM contents (SAME VERSION AS AS UP600 700) Note Slower than using SD card. Driver / Update 117.41 KB
UP-800 (serv.man69) Software Utility for downloading Graphic Logo to UP-810 integral printer Driver / Update 1.7 MB
UP-800 (serv.man36) UP-800 Version History 1.74 (This document contains all the specification changes and Bug fixes upto version 1.74) Driver / Update 12 2.27 MB
UP-800 (serv.man37) UP-800 Enhanced ROM V1.74 This ROM version is based on V1.73 with additional enhancements and features. V1.73 data is 100, compatible with V1.74(Do NOT use 1.51 1.04 1.05 1.03 1.02 1.62 1.64 1.70 1.71 1.72 program data with this version. Driver / Update 1.92 MB
UP-800 (serv.man38) Launch Demo Program All RAM DATA coverted to work with Rom V1.73, Extract Zip file to SD card and load using SD CARD MODE with Folder code 06072011 Driver / Update 51.69 KB
UP-800 (serv.man39) UP-800 Version History 1.73 (This document contains all the specification changes and Bug fixes upto version 1.73) Driver / Update 15 117.96 KB
UP-800 (serv.man40) UP-800 Enhanced ROM V1.73 This ROM version is based on V1.70 with additional enhancements and features. (Do NOT use 1.51 1.04 1.05 1.03 1.02 1.62 1.64 1.70 1.71 1.72 program data with this version. Driver / Update 1.92 MB
UP-800 (serv.man41) UP-800 Version History 1.70 (This document contains all the specification changes and Bug fixes upto version 1.70) Driver / Update 8 84.14 KB
UP-800 (serv.man42) UP-800 Enhanced ROM V1.70 This ROM version is based on V1.64 with additional enhancements and features. (Do NOT use 1.51 1.04 1.05 1.03 1.02 1.62 1.64 program data with this version Driver / Update 1.96 MB
UP-800 (serv.man43) UP-800 series Main ROM Version 1.03(Self extracting file, can be loaded via POSUtilityTool4.exe) Create an All RAM backup and remove any existing SSP's before upgrading Driver / Update 1.84 MB
UP-800 (serv.man44) UP820LG1.ini and UP820LG2.ini files for Rom Version 1.64 need to be placed in the LOGO Converter install folder to enable 130 dots high x 360 wide UP-820 HEADER LOGO and FOOTER LOGO Driver / Update 1.04 KB
UP-800 (serv.man45) UP810LG1.ini and UP810LG2.ini files for Rom Version 1.64 need to be placed in the LOGO Converter install folder to enable 90 dots high HEADER LOGO and 130 high FOOTER LOGO Driver / Update 1.05 KB
UP-800 (serv.man46) UP810LG1.ini and UP810LG2.ini files for Rom Version 1.64 need to be placed in the LOGO Converter install folder to enable 130 dots high HEADER LOGO and 130 high FOOTER LOGO Driver / Update 1.06 KB
UP-800 (serv.man47) release notes, Version history Driver / Update 2 21.59 KB
UP-800 (serv.man49) UP-800 series Main ROM Version 1.04(Extract the ROM file from the zip), can be loaded via POSUtilityTool4.exe) Create an All RAM backup and remove any existing SSP's before upgrading. V1.04 data is compatible with V1.03 and V1.03B data., For version history see V1.64 version history documentation Driver / Update 1.99 MB
UP-800 (serv.man85) Software utility for programming LM048SPA Blue Tooth devices Software / Firmware 2.81 MB
UP-800 (serv.man9) Promotions Procedure Handy Guide 10 311.28 KB
UP-800 Opticon scanner config sheet for eprom terminals. Handy Guide 3 78.1 KB
UP-800 (serv.man2) Metrologic MS9520 to Sharp Eprom Setup codes and cable spec Handy Guide 1 86.15 KB
UP-800 (serv.man3) Documentation on how to connect a Bizerba scale to UP800 series including cable specification Handy Guide 2 45.61 KB
UP-800 (serv.man4) Documentation on how to connect Avery FX series scale to UP800 series including cable specification Handy Guide 2 65.71 KB
UP-800 (serv.man5) Orderman UP800 Set-up Guide (The guide contains step by step information to configure a working UP800 to Orderman system) Handy Guide 3 23.37 KB
UP-800 (serv.man6) UP-800 Series Enhancement ROM V1.5x Presentation Guide (This documentation contains brief details on the enhanced features) Handy Guide 13 192.15 KB
UP-800 (serv.man7) Bonus Points Function Handy Guide 6 70.84 KB
UP-800 (serv.man8) UP-800 series training presentation Handy Guide 121 1.92 MB
UP-800 (serv.man10) IPL Via EPROM Procedure Handy Guide 1 44.89 KB
UP-800 (serv.man11) IPL Via PC Procedure Handy Guide 2 94.03 KB
UP-800 (serv.man12) Master Reset Procedure Handy Guide 2 98.51 KB
UP-800 (serv.man13) SD Card Function Handy Guide 5 155.57 KB
UP-800 (serv.man14) MRS keysheet for UP-820F in Excel format. Handy Guide 10.84 KB
UP-800 (serv.man15) MRS keysheet for UP-800F in Excel format. Handy Guide 10.65 KB
UP-800 (serv.man16) MRS keysheet for UP-810F in Excel format. Handy Guide 10.97 KB
UP-800 (serv.man35) UP-800 series FAQ's Updated 21st February 2012 FAQ 14 202.43 KB

RANDOM: