Sharp UP-800 (serv.man32) User Manual / Operation Manual ▷ View online
11
A clerk sign-on report can be generated at the master. This report is used to know which clerks have signed
on at which machines.
on at which machines.
Report generation procedure
1.
Enter the PGM2 mode from the mode selection window.
2.
Select “READING” and press the
e
key.
The READING window will appear.
3.
Select “INLINE CONFIG” and press the
e
key.
The INLINE READING window will appear.
4.
Select “SIGN ON CLERK” and press the
e
key.
The OUTPUT TO window will appear.
5.
Select “DISPLAY” or “REPORT PRINTER” and press the
e
key.
PGM2
SIGN ON
NAME
CODE
M–No.
CLERK0001
0001
000123
CLERK0002
0002
000234
CLERK0003
0003
000001
Clerk name, clerk code, machine no. of
the machine at which the clerk has signed on
the machine at which the clerk has signed on
Sample Print (master)
6. Clerk sign-on report
12
The sign-off operation is intended to cancel the assignment of a clerk to a machine and terminate his or her
registration operation.
The sign-off operation at a machine (master or satellite) can be done only for the clerk who has signed on at
the machine and are not in the middle of a registration entry.
registration operation.
The sign-off operation at a machine (master or satellite) can be done only for the clerk who has signed on at
the machine and are not in the middle of a registration entry.
Sign-off procedure
• For the contactless clerk key system:
• For the contactless clerk key system:
Remove the contactless clerk key.
* The contactless clerk key is optional.
* The contactless clerk key is optional.
• For the clerk entry key system:
Press the same clerk entry key that you pressed to sign on.
• For the WMF clerk key system (option):
Pull out the WMF clerk key.
* The WMF clerk key is not a SHARP product.
* The WMF clerk key is not a SHARP product.
• For the code entry system:
Press the
˚
key.
• The sign-off operation can be made only for one clerk at a time.
• If a clerk signs on at a machine while another clerk has already signed on there using the clerk
• If a clerk signs on at a machine while another clerk has already signed on there using the clerk
entry key system or the code entry system, the preexisting clerk is automatically signed off
unless he or she is halfway through an item entry.
unless he or she is halfway through an item entry.
• If the sign-off operation for the contactless clerk key system is done while the corresponding
clerk is still in the middle of a registration entry, the transaction is finalized automatically.
Your POS terminal can provide the clerk + cashier system instead of current system (clerk only
system). If you want to change the system, please consult your authorized SHARP dealer.
system). If you want to change the system, please consult your authorized SHARP dealer.
Cashier sign-off procedure
• For the cashier entry key system:
• For the cashier entry key system:
Press the same cashier entry key that you pressed to sign on.
• For the code entry system:
Press the
j
key.
NOTE
NOTE
7. Sign-off operation
(cancellation of clerk assignment) (REG mode/MGR mode)
13
When you have completed the programming at the master, you can distribute the preset data from the
master to all or desired satellites in the IRC system.
master to all or desired satellites in the IRC system.
(1) Initial downloading
For initial setup of the IRC system, follow the downloading procedure below. When the preset data in
the master is downloaded to each satellite, existing preset data in the satellite, if any, is cleared.
the master is downloaded to each satellite, existing preset data in the satellite, if any, is cleared.
1.
Enter the PGM2 mode from the mode selection window.
2.
Select “INITIAL D/L” and press the
e
key.
The INITIAL D/L window will appear.
3.
If you wish to distribute all preset data files in the master to
satellites, select “ALL PGM” and press the
satellites, select “ALL PGM” and press the
e
key. If you
wish to distribute an individual preset data file, select the
corresponding data item and press the
corresponding data item and press the
e
key.
Enter an appropriate code range if needed.
The MACHINE No. window will appear.
The MACHINE No. window will appear.
4.
If you wish to download the preset data to all satellites, select
“ALL” and press the
“ALL” and press the
e
key. If you wish to download the data
to certain satellite(s), select “MACHINE SELECT” and press
the
the
e
key. In this case, the MACHINE SELECT window will
open.
Move the cursor to the corresponding machine numbers,
select “YES,” and press the
select “YES,” and press the
c
key.
Check the contents of the programming of all the satellites in the IRC system that have received
the preset data.
the preset data.
NOTE
8. Downloading the contents of the programming to satellites – master
14
(2) Maintenance downloading
To update the preset data for the IRC system, follow the downloading procedure below. The preset
data in the master is downloaded to each satellite without clearing its existing preset data.
data in the master is downloaded to each satellite without clearing its existing preset data.
1.
Enter the PGM2 mode from the mode selection window.
2.
Select “MAINTE. D/L” and press the
e
key.
The MAINTENANCE D/L window will appear.
3.
Select a preset data item for maintenance and press the
e
key.
Enter an appropriate code range if needed.
The MACHINE No. window will appear.
The MACHINE No. window will appear.
4.
If you wish to download the preset data to all satellites, select
“ALL” and press the
“ALL” and press the
e
key. If you wish to download the data
to certain satellite(s), select “MACHINE SELECT” and press
the
the
e
key. In this case, the MACHINE SELECT window will
appear.
Move the cursor to the corresponding machine numbers,
select “YES,” and press the
select “YES,” and press the
c
key.
Click on the first or last page to see other UP-800 (serv.man32) service manuals if exist.