DOWNLOAD Sharp UP-800 (serv.man32) Service Manual ↓ Size: 5.14 MB | Pages: 68 in PDF or view online for FREE

When a remote printer is included in the inline system, order data is output to the remote printer according
to the remote printer assignment.

The remote printer, also called a kitchen printer, is used to print all or part of the data entered at a machine.
Although kitchen may be one of the typical settings for the convenient use of the remote printer, it can also
be used at any location.

If a remote printer is assigned to a department or PLU, the information on the department or PLU is output
to the remote printer when the 

ı

or 

f

key is pressed or the transaction is finalized at a terminal.

The data which can be output to a remote printer is as follows:

1) Item text
2) Quantity*
3) Unit prince*/Price*
4) Amount*
5) PLU/department code*
6) Free text*
7) Number of guests*

* Whether to print or not is selectable.

Second (back-up) remote printer
A second remote printer can be assigned to each remote printer for automatic back-up.
If an error occurs during data output to a remote printer, the data is output to the second remote printer
assigned to it.
If an error occurs during data output to the second remote printer, the data is output to the receipt printer of
the terminal.

Up to two remote printers can be preset to print data on each item (PLU or department).
If two printers are preset to print data on each item, the data is simultaneously output to both printers.
If either of these printers encounters an error, the data is output to its backup printer.
If the backup printer encounters an error, a receipt is printed.

In restaurants or the like, every terminal does not need an external printer (a bill printer, a validation printer
or a kitchin printer).
One external printer connected by an RS-232 cable can be shared by two or more UP-800F/UP-810F machines.

Print data rerouting chart

Rerouting data to the built-in printer chart

Out put to

built-in printer

via LAN

via RS-232 cable

UP-800F/UP-810F

UP-810F

Rerouting data flow

Print data (1)

Print data (2)

Print data (1)

External printer

External printer

Ordinary data flow

UP-800F/UP-810F

UP-800F/UP-810F

UP-800F/UP-810F

2

The system can generate two types of sales reports: consolidated reports (reports on all or specified
machines in the system) and individual reports (reports on individual machines). At the master, you can
generate consolidated reports on all or specified satellites and reports on the master itself. At each satellite,
you can generate reports on the satellite.

X1/Z1 mode: Daily sales reading (X1) and resetting (Z1) reports
X2/Z2 mode: Periodic consolidation reading (X2) and resetting (Z2) reports
OPXZ mode: Individual clerk/cashier daily sales reading (X) and resetting (Z) reports

To generate various reports, use the following procedure, referring to the list of consolidated reports
on the following pages.

Enter the required operating mode (OPXZ, X1/Z1 or X2/Z2)
from the mode selection window.

Select “SYSTEM READING” or “SYSTEM RESETTING”
depending on your need, and press the 

e

key.

Select the type of report you wish to generate and press the

e

key or enter the corresponding report type No.(2-digit)

shown on the display. By selecting an item with parentheses
on the opening screen and pressing the 

e

key, you can

jump to the pertinent report list. (If the desired type of report
is not listed on the display, you can scroll up or down the
screen with the scroll keys.)

If you need to enter data to generate a report, follow the
instructions given on the display for entry.
The MACHINE No. window will appear.

If you wish to generate a report on all the machines in the
system, select “ALL” and press the 

e

key. If you wish to

generate a report on specific machines, select “MACHINE
SELECT” and press the 

e

key. In this case, the MACHINE

SELECT window will open. Move the cursor to the machine
number, select “YES,” and press the 

c

key.

The OUTPUT TO window will appear.

Select “DISPLAY” or “REPORT PRINTER” and press the 

e

key.