DOWNLOAD Sharp UP-800 (serv.man32) Service Manual ↓ Size: 5.14 MB | Pages: 68 in PDF or view online for FREE

All clerk report

Individual clerk report

All cashier report

Individual cashier report

Hourly report (by specified range)

Hourly report (all)

Daily net report

GLU report

GLU report by clerk

Balance report

Customer ordering report

Stacked report 1

Stacked report 2

Electronic journal

Only for the individual clerk file system

Only for the individual clerk file system

Only for the clerk + cashier system

Only for the clerk + cashier system

Time range

GLU code

(The range can be specified by 

entering start and end codes.) 

Only for the individual GLU file system

Only for the individual GLU file system

Customer ordering code

(The range can be specified by 

entering start and end codes.)

-

X,Z

-

X,Z

-

-

-

-

-

-

-

-

X,Z

X1,Z1

X1,Z1

X1,Z1

X1,Z1

X1

X1,Z1

-

X1,Z1

X1,Z1

X1

-

X1,Z1

X1,Z1

X2,Z2

X2,Z2

X2,Z2

X2,Z2

-

-

X2,Z2

-

-

X2

X2,Z2

X2,Z2

-

<PERSONNEL>

ALL CLERK

IND. CLERK

ALL CASHIER

IND. CASHIER

<OTHERS>

HOURLY

DAILY NET

GLU

GLU BY CLERK

BALANCE

CUSTOMER 

ORDERING

STACKED REPORT

E. JOURNAL

In a system which has no save file and has been programmed so as to automatically lock the satellites after
resetting when general resetting, hourly resetting, cashier resetting or daily net resetting report is taken, the
data in the satellites concerned is not cleared. In this case, the satellites will be locked after resetting, and
any entry will not be allowed in the REG/MGR mode there.
Generation of the same resetting report in the locked state will print a copy symbol on the report.
The satellites can be unlocked by generating a consolidated resetting report at the master, or by manual
clearing of the sales memories of the satellites.

Your dealer can program whether or not to have save files, and whether or not to lock the satellites. For
details, consult your local authorized SHARP dealer.

As stated earlier (see page 8), there are two systems for collecting clerk sales data: a centralized system
and an individual system.

In this system, the transaction data on a clerk in each satellite will be transmitted to the master each
time the clerk signs off. You cannot generate an individual clerk report for each satellite. At the master,
you can generate full and individual clerk consolidated reports.
At each satellite, you can generate individual clerk consolidated reports.

If resetting operation for a consolidated individual clerk Z report is made at a satellite where a clerk is
signed on, the data on transactions being handled by the clerk or cashier is also added and printed
out.

If a consolidated full clerk Z report is taken at the master while a clerk signs on at a satellite, that
clerk’s sales data are excluded from the report and resetting operation for the clerk can not be made.

Machine no.
Consecutive no.
Date

Report type

Clerk code
Clerk name
Data on clerk #0001

Report mode

Data on clerk #0002
(If the report is taken with clerk #0002 signed on at a 
satellite, the data on the clerk is not printed.)

Reset counter
Time

In this system, you can generate full or individual clerk consolidated X or Z reports at the master only.
At each machine, you can generate an individual X or Z report on transactions made by an individual
clerk or clerks assigned to the machine.

If the system has no save file, the clerk for whom an individual Z report has been generated is not
allowed to make registrations in the REG mode. This condition, in which registrations by the clerk are
disallowed, is canceled when his or her sales data is consolidated and reset at the master or when the
sales data is manually cleared. (For the manual clearing operation, see pages 61–62.)

When an X or Z report for the locked clerk is generated again, the COPY mark will be printed in the
report as shown below. (This COPY mark will not appear when the system has a save file.)

   000001     OK

Symbol of copy

Symbol of copy