Sharp UP-800 (serv.man32) User Manual / Operation Manual ▷ View online
43
You can specify whether to enable or disable the system retry function if a communication between
machines does not end successfully.
This function can be specified in the INLINE CONFIG window of the master and each satellite in the IRC
system.
machines does not end successfully.
This function can be specified in the INLINE CONFIG window of the master and each satellite in the IRC
system.
1.
Enter the PGM2 mode from the mode selection window.
2.
Select “SETTING” and press the
e
key.
The SETTING window will appear.
3.
Select “INLINE CONFIG” and press the
e
key.
The INLINE CONFIG window will appear.
4.
Move the cursor to the “SYSTEM RETRY” line.
Select “DISABLE” or “ENABLE” with the
.
key (toggle key)
and press the
c
key.
• If the system retry function is enabled, a transmission job with which an error has occurred is
not finalized immediately, but the master waits for selection of one of the three commands
(RETRY, ABORT and IGNORE) through the keyboard. Then the master retries access to the
satellite that has caused the transmission error or terminates the access as a successful or
unsuccessful transmission depending on the selection made.
(RETRY, ABORT and IGNORE) through the keyboard. Then the master retries access to the
satellite that has caused the transmission error or terminates the access as a successful or
unsuccessful transmission depending on the selection made.
• If the function is disabled, the job is terminated immediately.
• For further information, see the “System retry function” section on page 63–64.
• The default setting is “ENABLE.”
• For further information, see the “System retry function” section on page 63–64.
• The default setting is “ENABLE.”
NOTE
5. Specifying whether to enable or disable the system retry function
when a transmission error occurs – master and satellite
44
At a satellite, you can choose which machine, either the master or the satellite, should be searched first for
the PLU/EAN code. If you specify that the master should be searched first and enter the PLU/EAN code, the
master is first searched and then the satellite is searched, and vice versa.
However, either choice of search order made at the master is invalid. In other words, even if you specify at
the master that the satellite should be first searched, the master will be first searched.
the PLU/EAN code. If you specify that the master should be searched first and enter the PLU/EAN code, the
master is first searched and then the satellite is searched, and vice versa.
However, either choice of search order made at the master is invalid. In other words, even if you specify at
the master that the satellite should be first searched, the master will be first searched.
1.
Enter the PGM2 mode from the mode selection window.
2.
Select “SETTING” and press the
e
key.
The SETTING window will appear.
3.
Select “INLINE CONFIG” and press the
e
key.
The INLINE CONFIG window will appear.
4.
Move the cursor to the “LOOKUP ORDER” line.
Select “MA”(Master) or “SA”(Satellite) with the
.
key(toggle
key) and press the
e
key.
6. Choosing whether to search the master or satellite
first for the PLU/EAN code – satellite
45
1.
Enter the PGM2 mode from the mode selection window.
2.
Select “READING” and press the
e
key.
The READING window will appear.
3.
Select “INLINE CONFIG” and press the
e
key.
The INLINE READING window will appear.
4.
Select “INLINE PRESET” and press the
e
key.
The OUTPUT TO window will appear.
5.
Select “DISPLAY” or “REPORT PRINTER” and press the
e
key.
7. Reading the contents of the IRC programming – master and satellite
46
PGM2
I NL I NE PRESET
T–No.
192.168.070.001
MWS PORT No.
49152
MASTER LIST
T–No. M–No.
001 000001#
002 000002#
003 000003#
004 000004#
005 000005#
SYSTEM RETRY ENABLE
BACK UP MASTER
T–No. M–No.
002 000002#
LOOKUP ORDER MA FIRST
Sample Print (master)
PGM2
I NL I NE PRESET
T–No.
192.168.070.002
MWS PORT No.
49152
SYSTEM RETRY ENABLE
LOOKUP ORDER MA FIRST
Sample Print (satellite)
Terminal number of the master
MWS port no.
Terminal number of the satellite
MWS port no.
System retry function (enable/disable)
List of the machines involved in the IRC system
(terminal no. and machine no.)
(terminal no. and machine no.)
Back-up master (terminal no. and machine no.)
The machine from which the PLU/EAN code is searched first
The machine from which the
PLU/EAN code is searched first
PLU/EAN code is searched first
System retry function (enable/disable)
Click on the first or last page to see other UP-800 (serv.man32) service manuals if exist.