DOWNLOAD Sharp UP-800 (serv.man32) Service Manual ↓ Size: 5.14 MB | Pages: 68 in PDF or view online for FREE

For connection of a remote printer to a terminal(s) in the IRC system, be sure to consult your authorized
SHARP dealer.

With the following procedure, you can do basic programming for the remote printer(s) included in the
IRC system.
For initial setup of the remote printer, please consult your authorized SHARP dealer.

Enter the PGM2 mode from the mode selection window.

Select “SETTING” and press the 

e

key.

The SETTING window will appear.

Select “DEVICE CONFIG” and press the 

e

key.

The DEVICE CONFIG window will appear.

Select the remote (kitchen) printer to be programmed.

Carry out the programming for the remote printer.

(See the next page for programming for individual remote
printer items.)

• Be sure to consult your authorized SHARP dealer for the

correct settings.

After programming for the remote printer, press the 

c

key.

TERMINAL#

Enter the terminal number (1-254, 0).

CHANNEL#

Enter the channel number (0-7).

PRINTER

Select the model of the remote printer.

TM-T88(3)/88(4) (EPSON)
TM-U220/230 (EPSON)
BUILT-IN(820)
BUILT-IN(810)

AUTO CUTTER

Choose whether to disable or enable the auto cutter function.

NO:

Disables the auto cutter function.

YES: Enables the auto cutter function.

PRINT TYPE

Select the receipt type.

ADDITION: Addition receipt type
S/D:

Single/double receipt type

ADD.+S:

Addition + single receipt type

D ADD.:

Double addition receipt type

D ADD+S: Double (addition + single) receipt type

SECOND KP

Enter the second remote (kitchen) printer number (1-9, 0).

NAME

Enter the name of the remote printer (max.12 characters).

INITIAL FEED#

Enter the initial line feed for the remote printer (0 to 64 lines).

SORT RCPT. CUTTING

Choose whether to disable or enable the partial cut between each sort group.

NO:

Disables the partial cut function.

YES: Enables the partial cut function.

SEQUENTIAL PRINT

Choose whether to disable or enable the sequential print function.

NO:

Disables the sequential print function.

YES: Enables the sequential print function.

With the following procedure, you can specify what items to be printed on the remote printer.

Enter the PGM2 mode from the mode selection window.

Select “SETTING” and press the 

e

key.

The SETTING window will appear.

Select “OPTIONAL” and press the 

e

key.

The OPTIONAL window will appear.

Select “PRINT SELECT2” and press the 

e

key.

The PRINT SELECT2 window will appear.

Make appropriate settings for items to be printed on the
remote printer and press the 

e

key.

(See the next page for programming for individual items.)

After programming for the items, press the 

c

key.

SEPARATOR LINE

NO:

Does not print the separator line on the remote printer.

YES: Prints the separator line on the remote printer.

FREE TEXT ON KP

NO:

Does not print the free text on the remote printer.

YES: Prints the free text on the remote printer.

ITEM CODE ON KP

NO:

Does not print the PLU/department code on the remote printer.

YES: Prints the PLU/department code on the remote printer.

PRICE ON KP

NO:

Does not print the price on the remote printer.

YES: Prints the price on the remote printer.

AMOUNT ON KP

NO:

Does not print the amount on the remote printer.

YES: Prints the amount on the remote printer.

GUEST# ON KP

NO:

Does not print the number of guests on the remote printer.

YES: Prints the number of guests on the remote printer.

QTY=1 ON KP

NO:

Does not print quantity data on the remote printer when the quantity is “1”.

YES: Prints quantity data on the remote printer even though the quantity is “1”.

UNIT PRICE PRINT

NO:

Does not print the unit price on the remote printer.

YES: Prints the unit price on the remote printer.