Sharp MX-M364N / MX-565N (serv.man5) Service Manual ▷ View online
MX-M565N IC card reader 27 – 4
Fold and put the rest of the cable under the bundle.
Fix the cable at the USB connector socket section in the USB
mini harness side.
mini harness side.
Fix so that the USB connection position is at the center of the
card reader holder.
card reader holder.
Holder type C
RDR-6081AKU, RDR-7582AKU
Hang the cable on the two hooks and wind it so that there is no
slack.
RDR-6081AKU, RDR-7582AKU
Hang the cable on the two hooks and wind it so that there is no
slack.
If there is some slack, the cable may be pinched.
Fold and put the rest of the cable under the bundle.
Bind the root section of the USB connector in the card reader
side and the USB connector socket section in the USB mini
harness side with the binding bands.
side and the USB connector socket section in the USB mini
harness side with the binding bands.
Fix so that the USB connection position is at the center of the
card reader holder.
card reader holder.
Holder type C
TWN3
Hang the cable on the two hooks and wind it so that there is no
slack.
TWN3
Hang the cable on the two hooks and wind it so that there is no
slack.
If there is some slack, the cable may be pinched.
Fold and put the rest of the cable under the bundle.
Bind the root section of the USB connector in the card reader
side and the USB connector socket section in the USB mini
harness side with the binding bands.
side and the USB connector socket section in the USB mini
harness side with the binding bands.
Fix so that the USB connection position is at the center of the
card reader holder.
card reader holder.
MX-M565N IC card reader 27 – 5
C. Attach the operation panel upper cover
D. Connect the connector of the IC card reader to
the connector of the machine
E. Turn ON the power of the main unit
1) Connect the power plug of the machine to the power outlet,
and turn ON the main power switch and the operation panel
power switch.
power switch.
F. System setting modification
IC card reader device registration
1)
1)
Device registration
a)
a)
Enter the card reader setting menu as shown below.
System Settings > User Control > Card Reader Device
Registration
System Settings > User Control > Card Reader Device
Registration
b)
Press [Read] button.
c)
Disconnect the connector which links the machine and the
IC card reader, and then insert it back.
IC card reader, and then insert it back.
d)
Press [OK] button.
e)
Check to confirm that values are displayed on “Product
ID” and “Vendor ID”.
ID” and “Vendor ID”.
f)
Press [SUBMIT] button, and check to confirm that the suc-
cess dialog message is displayed.
cess dialog message is displayed.
MX-M565N IC card reader 27 – 6
2) Setting
a)
Enter the card reader setting menu as shown below.
System Settings > User Management > Card Type/Card
Reader Settings
System Settings > User Management > Card Type/Card
Reader Settings
b)
Check-mark “Use IC Card for Authentication”.
c)
Press [Submit] button.
G. IC card recognition check
There are two check methods of IC card recognition. Use either
one to check that the IC card reader is recognized.
Check method 1
1) Enter the card reader setting menu as shown below.
one to check that the IC card reader is recognized.
Check method 1
1) Enter the card reader setting menu as shown below.
Home > Settings > System Settings > USB-Device Check
2) Check to confirm that “Card Reader/Writer” is displayed.
Check method 2
Check to confirm that the icon of the card reader is displayed on the
system area of the home screen.
(If there is no check-mark on “Use IC Card for Authentication,” the
icon is not displayed.)
Check to confirm that the icon of the card reader is displayed on the
system area of the home screen.
(If there is no check-mark on “Use IC Card for Authentication,” the
icon is not displayed.)
H. External fixture attachment
Before installation, be sure to turn both the operation and main
power switches off and disconnect the power plug from the power
outlet. Make double sure that the data lamp on the operation panel
does not light up or blink when performing installation.
power switches off and disconnect the power plug from the power
outlet. Make double sure that the data lamp on the operation panel
does not light up or blink when performing installation.
1)
Attach the operation panel cover.
2)
Attach the front cabinet upper.
I. Making and importing of the setting file for HID
card reading
The following procedures are executed only when a request is
made by a user for customizing the data format of IC card reading.
made by a user for customizing the data format of IC card reading.
1)
Make the setting file for HID card reading.
For the making procedures, refer to the Manual of Setting File
for HID Card Reading.
For the making procedures, refer to the Manual of Setting File
for HID Card Reading.
2)
Copy the setting file to a USB memory.
1
3
MX-M565N IC card reader 27 – 7
3) Import the setting file for HID card reading to the machine.
a)
Enter the system settings menu as shown below:
Home > Settings > User Control > Administrator Login >
Card Area Setting
Home > Settings > User Control > Administrator Login >
Card Area Setting
b)
Connect the USB memory to the USB connector in the
operation section.
operation section.
c)
Select the file made in procedure 1) above.
d)
Press [Execute] button.
(The setting file for HID card reading is loaded.)
(The setting file for HID card reading is loaded.)
4) Perform the operation check.
a)
While holding the IC card over the IC card reader, press
[Execute] button of “Card Scan Test”.
[Execute] button of “Card Scan Test”.
b)
The IC card data are loaded. The test result is displayed
as shown below:
Display when loading is successfully completed:
as shown below:
Display when loading is successfully completed:
Display when loading is failed:
When an error occurs, troubleshoot the cause and remove the trou-
ble. Then perform the above procedures again.
Possible causes for an error may be error of the IC card or
improper contents of the setting file for HID card reading.
ble. Then perform the above procedures again.
Possible causes for an error may be error of the IC card or
improper contents of the setting file for HID card reading.
3. Setting file for HID card reading
A. Overview
This manual describes the following setting procedures for reading
data from an IC card by using the HID card reading function:
- Setting of the reading area of card data
- Setting for assignment of read data to the card ID and the facility
data from an IC card by using the HID card reading function:
- Setting of the reading area of card data
- Setting for assignment of read data to the card ID and the facility
code
* If the above setting procedures are not completed, the default
setting is valid, reading all the data in the card and assigning to
the card ID.
the card ID.
The brief steps of the setting are:
- Make the setting file according to the format specified in this man-
- Make the setting file according to the format specified in this man-
ual.
- Import the setting file through web page or by using the system
setting of the machine, “HID user area setting”
In-case of System setting mode:
User control > Card area setting > Importing from the setup file
In-case of System setting mode:
User control > Card area setting > Importing from the setup file
B. Format of the setting file
The format of the setting file should be as shown below:
Section name
Key name = Key value
* Use the template setting file, change the key value, make an
Section name
Key name = Key value
* Use the template setting file, change the key value, make an
arbitrary file name with an arbitrary extension (such as.ini), and
save the file.
save the file.
- A line started with “#” or “;” is treated as a comment.
- A blank line may be inserted.
- Use one-byte alphanumeric characters only (except for comment
- A blank line may be inserted.
- Use one-byte alphanumeric characters only (except for comment
lines).
- A one-byte space may be inserted in front of and at the back of
“=” which connects the key name and the key value.
- Characters for the key value are case-insensitive. (“ABCD” is
considered as the same as “abcd”.)
The section name (which is not changed in principle) and the key
name must be distinguished each other.
The section name (which is not changed in principle) and the key
name must be distinguished each other.
- The size of the setting file must be 4KByte or less.
- For the keys which are not set, the column of the value must be
- For the keys which are not set, the column of the value must be
blank or the whole line may be deleted (commented out).
C. Descriptions on the setting file
(1) Setting of the general information
*1: This manual describes only the setting of the HID card.
Detail of error
Error display
Error content and remedy
Card is not
found.
found.
Content
The card is not detected.
Remedy
Check to confirm that the card is securely
inserted into the IC card reader.
inserted into the IC card reader.
Read Error.
Content
A read error occurs.
Remedy
Check to confirm that the card and the card
reader operate normally with a personal
computer, etc.
reader operate normally with a personal
computer, etc.
Read Success.
Card ID : XXXXX
Facility Code : XXXXX
Section name
Description
General
Setting of the general information
[General]
Key name
Description
Version
Setting file version (* Fixed to 1.0)
Card
Set as shown below depending on the kind of the card to be
set.
set.
*1
Key value
Description
Felica FeliCa
Card
Hid HID
Card