DOWNLOAD Sharp MX-M364N / MX-565N (serv.man5) Service Manual ↓ Size: 45.47 MB | Pages: 127 in PDF or view online for FREE

MX-M565N  MX-PUX1  20 – 1

MX-M565N

Service Manual

 

Before installation, be sure to turn both the operation and main
power switches off and disconnect the power plug from the power
outlet. Make double sure that the data lamp on the operation panel
does not light up or blink when performing installation. 

1) Remove the left cabinet.

2) Remove the shield plate.

1)

Attach the DIMM memory board to the MFP control PWB as
the figure below.

When handling an expansion memory board, be careful not to
touch the terminals.

1)

Attach the shield plate.

2)

Attach the left cabinet.

1

CD-ROM

1

2

Operation manual

1

3

Product key sheet

1

1

2

3

',006/27

MX-M565N  MX-PUX1  20 – 2

1) Enter the product key to enable the functions.

a)

Enter the system setting mode.

b)

The machine enters the product key input mode.

c)

Enter the product key.

d)

Press the registration key.

2) After completion of the product key input, turn OFF the power

switch on the operation panel of the machine, and turn OFF
the main power switch.

3) Turn ON the main power switch and the power switch on the

operation panel.

Execute SIM22-10 (Machine configuration display) to check to con-
firm that the set functions are enable.

MX-M565N  MX-FX11  21 – 1

MX-M565N

Service Manual

 

*: Brazil, South Africa only

Before installation, be sure to turn both the operation and main
power switches off and disconnect the power plug from the power
outlet. Make double sure that the data lamp on the operation panel
does not light up or blink when performing installation.

1) Remove the screw and cur the cabinet on the rear cabinet of

the main unit. Attach the step screw (Packed items No.7) as
the figure below.

2)

Fix the Fax unit with the screws which were removed in the
step 1).

1)

Remove the left cabinet.

2)

Remove the shield plate.

1

Fax  unit

1

2

Line  cable

1

3

Ferrite core

2

4

Step screw (M3)

1

5

M3 screw

1(2)*

6

Binding band

1*

7

Step screw (M4) 

1

8

Line cable

1

2

1

4

3

5

6

8

U.K

France

Germany

Australia

For other destinations

7

&XW

MX-M565N  MX-FX11  21 – 2

1) Connect the I/F cable to the MFP controller PWB, and fix the

binding band (and FG line (Taiwan, Brazil, South Africa)) with
the M3 screw included in the package.

Check to confirm that it is securely connected.
(Except Taiwan, Brazil, South Africa)

(Taiwan, Brazil, South Africa)
It is necessary to attach the core included in the machine.  

1) Attach the shield plate.

2)

Attach the left cabinet.

1)

Connect the power plug of the machine to the power outlet,
and turn ON the main power switch and the operation panel
power switch.

1)

Enter the SIM26-6 mode.

2)

Check to confirm that the destination setting of the machine
matches the specifications of the FAX destination. If not, the
FAX may not function properly.

1)

Enter the SIM66-2 mode.

2)

Press DEST CODE button.

3)

Take a note of the corresponding destination code.

4)

Press BACK button to return to the code entry mode.

5)

Enter the destination code taken in procedure 3), and press
SET button.

6)

Press EXECUTE and YES buttons.

1)

Connect the line cable on the line to the modular jack indicated
as “LINE.”

When connecting the line cable (to LINE or TEL), wind the line
cable two turns or one turn around the included ferrite core as
shown in the figure, and connect to the modular jack which is
marked with “LINE.”

After connection, perform the setting of “External telephone con-
nection” of the system setting (administrator).

About 
10 cm

2 turns

About 
10 cm

1 turn