Sharp LC-60LE822E (serv.man9) Service Manual ▷ View online
LC-60LE822E/LC-60LE822ERU
4 – 1
LC-60LE822E
Service Manual
CHAPTER 4.
REMOVING OF MAJOR PARTS
[1] REMOVING OF MAJOR PARTS
1. Removing of Stand Unit and Rear Cabinet Ass’y.
1. Remove the 3 lock screw and detach the Support Cover .
2. Remove the 4 lock screws and detach the Stand Unit .
3. Remove the 1 lock screw and detach the AC Cord Cover .
4. Disconnect AC Cord .
5. Remove the 4 lock screws , 5 lock screws , 2 lock screws and 18 lock screws and detach the Rear Cabinet Ass’y.
AC Cord
11
Rear Cabinet Ass'y
4
Stand Unit
2
1
Support Cover
6
AC Cord Cover
10
10
7
3
5
9
8
LC-60LE822E/LC-60LE822ERU
4 – 2
2. Removing of Speaker-L/R.
1. Remove the 2 lock screws and detach the Stand Cover .
2. Disconnect SP wire.
3. Detach the Speaker-L , Speaker-R .
4. Detach the Insulation Sheet (AC)
MAIN Unit
2 Stand Cover
1
[SP]
[SP]
4
Speaker-R
3 Speaker-L
5
Insulation
Sheet (AC)
Sheet (AC)
LC-60LE822E/LC-60LE822ERU
4 – 3
3. Removing of Connectors
1. Disconnect the following connectors from the MAIN Unit. (SB, LB, PD, LW, RA, RL)
2. Disconnect the following connectors from the POWER/LED Drive Unit. (AS, L1, L2, LB, PD, PL)
3. Disconnect the following connectors from the LCD Control Unit. (LW, PL)
MAIN Unit
POWER/LED Drive Unit
[L1]
[L2]
[L2]
[LB]
[PD]
[AS]
[PL]
[LB]
[PD]
[RA]
[RL]
[LW]
[SB]
MAIN Unit
POWER/LED Drive Unit
LCD Control Unit
[LW]
[PL]
LC-60LE822E/LC-60LE822ERU
4 – 4
4. Removing of MAIN Unit, POWER/LED Drive Unit, Woofer, Stand Angle,60” LCD Panel Module Unit.
1. Remove the 6 lock screws and detach the MAIN Unit .
2. Remove the 2 lock screws and detach the Terminal Angle (Bottom) .
3. Remove the 2 lock screws and detach the Terminal Angle (Side) .
4. Remove the 6 lock screws and detach the POWER/LED Drive Unit .
5. Remove the 4 lock screws and detach the Woofer .
6. Remove the 1 lock screw and detach the LCD Angle (Bottom-R) .
7. Remove the 4 lock screws and detach the LCD Angle (Top-L) .
8. Remove the 2 lock screws and detach the LCD Angle (Top-R) .
9. Remove the 2 lock screws and detach the LCD Angle (Bottom-L) .
10.Remove the 12 lock screws and detach the 2 Stand Angle .
11.Remove the 4 lock screws and detach the 4 FIX Angle (B-MA) .
12.Remove the 2 lock screws and detach the Back Light Chassis Support Angle .
13.Remove the 9 lock screws and detach the 60” LCD Panel Module Unit .
14.Remove the 2 lock screws and detach the ECO Switch with Holder .
25
60" LCD Panel
Module Unit
Module Unit
[L1]
[L2]
[L2]
25
25
23
Back Light Chassis
Support Angle
24
12
11
17
17
21
19
19
LCD Angle
(Bottom-R)
(Bottom-R)
18
LCD Angle
(Bottom-L)
(Bottom-L)
20
Stand Angle
20
Stand Angle
22
FIX Angle
(B-MA)
(B-MA)
9
10
Woofer
[SB]
2 MAIN Unit
5
6 TERMINAL Angle
(Side)
3
4 TERMINAL Angle
(Bottom)
1
8
POWER/LED
Drive Unit
Drive Unit
7
16 LCD Angle
(Top-R)
15
15
14
LCD Angle
(Top-L)
(Top-L)
13
13
27
28
ECO Switch
with Holder