Sharp MX-M364N / MX-565N (serv.man5) Service Manual ▷ View online
MX-M565N MX-FN18 (SADDLE STITCH FINISHER) 13 – 6
5)
Remove the screws, and slide to the left the front lower cabinet
2, and remove it.
2, and remove it.
6)
Remove the fixing tapes.
7)
Remove the screws, and remove the rear lower cover.
8)
Remove the fixing tapes.
9)
Loosen the caster fixing screws.
10) Remove the screw, and remove the spanner installed inside
the front door.
MX-M565N MX-FN18 (SADDLE STITCH FINISHER) 13 – 7
11) Turn the bolt for which the adjustment is necessary, and adjust
to become it within the range of specification.
12) Check to insure that the upper and lower clearances between
the main unit and the finisher are even.
13) Tighten the caster fixing screws so that the indicator scale is
fit.
14) Install the rear lower cover with the fixing screws.
15) Install the front lower cabinet 2 with the fixing screws.
MX-M565N MX-FN18 (SADDLE STITCH FINISHER) 13 – 8
16) Install the front lower cabinet 1 with the fixing screws.
17) Attach the cabinet fixing screw.
18) Install the spanner for adjustment to inside the front door with
screw.
19) Close the front door.
F. Connection of the saddle stitch finisher
1)
Engage the saddle stitch finisher to the main unit.
2)
Open the front door of saddle stitch finisher.
3)
Fix the saddle stitch finisher to the main unit with the step
screw B (Packed items (No.4)).
screw B (Packed items (No.4)).
MX-M565N MX-FN18 (SADDLE STITCH FINISHER) 13 – 9
4)
Close the front cover.
5)
Remove the screw, and remove the connector cover on rear
side of the finisher.
side of the finisher.
6)
Install the Step screw B (Packed items (No.4)).
7)
Attach the connector cover on rear side of the finisher with the
fixing screw.
fixing screw.
G. Connection of connector to the main unit
1)
Connect two connectors of the saddle stitch finisher to the
main unit, and tighten the screws.
main unit, and tighten the screws.
H. Staple position label attachment
1)
Attach the staple position label (Packed items) to the position
indicated in the figure.
indicated in the figure.
For scanner (Packed items (No.9))
For DSPF/RSPF (Packed items (No.10))
I.
Turn on the power of the main unit
1)
Connect the power plug of the machine to the power outlet,
and turn ON the main power switch and the operation panel
power switch.
and turn ON the main power switch and the operation panel
power switch.
Fit with the corner R.
Label attachment reference
*Corner of the upper
cabinet bottom
Fit with the corner R.
DSPF
RSPF
Cleaning of the document scan section
CAUTION
When streaks appear on copy or scan
images, open the automatic document
feed unit and clean the document scan
section with the glass cleaner (accessory).
images, open the automatic document
feed unit and clean the document scan
section with the glass cleaner (accessory).
Click on the first or last page to see other MX-M364N / MX-565N (serv.man5) service manuals if exist.