Sharp MX-M364N / MX-565N (serv.man5) Service Manual ▷ View online
MX-M565N MX-FN11 (FINISHER) 12 – 7
13) Tighten the caster fixing screws so that the indicator scale is
fit.
14) Install the rear lower cover with the fixing screws.
15) Install the auxiliary wheels with the fixing screws.
16) Install the spanner for adjustment to inside the front lower door.
17) Close the front cover, and secure it with the fixing screws.
18) Attach the fixing screw, and close the front upper door.
MX-M565N MX-FN11 (FINISHER) 12 – 8
19) Attach the front lower cover with the fixing screw.
G. Connection of the finisher
1)
Engage the finisher to the main unit.
2)
Open the front cover of finisher.
3)
Fix the finisher to the main unit with the step screw B (Packed
items).
items).
4)
Close the front cover.
5)
Remove the screw, and remove the connector cover on rear
side of the finisher.
side of the finisher.
6)
Install the Step screw B (Packed items).
7)
Attach the connector cover on rear side of the finisher.
MX-M565N MX-FN11 (FINISHER) 12 – 9
H. Connection of connector to the main unit
1)
Connect two connectors of the finisher to the main unit, and
tighten the screws.
tighten the screws.
I.
Staple position label attachment
1)
Attach the staple position label (Packed items) to the position
indicated in the figure.
indicated in the figure.
For scanner
For DSPF/RSPF
J. Turn on the power of the main unit
1)
Connect the power plug of the machine to the power outlet,
and turn ON the main power switch and the operation panel
power switch.
and turn ON the main power switch and the operation panel
power switch.
Fit with the corner R.
Label attachment reference
*Corner of the upper
cabinet bottom
Fit with the corner R.
DSPF
RSPF
Cleaning of the document scan section
CAUTION
When streaks appear on copy or scan
images, open the automatic document
feed unit and clean the document scan
section with the glass cleaner (accessory).
images, open the automatic document
feed unit and clean the document scan
section with the glass cleaner (accessory).
MX-M565N MX-FN18 (SADDLE STITCH FINISHER) 13 – 1
MX-M565N
Service Manual
[13] MX-FN18 (SADDLE STITCH FINISHER)
1. Unpacking
A. Removal of the saddle stitch finisher
* For removal of the saddle stitch finisher, manpower of two per-
sons or more is required.
1)
Remove the fixing material, and remove the top case.
2)
Remove the bundled items from packing cushion.
3)
Holding the upper part of the saddle stitch finisher by two peo-
ple, pull up the saddle stitch finisher, and make it stand upright.
(Be careful to sliding worker's foot. )
ple, pull up the saddle stitch finisher, and make it stand upright.
(Be careful to sliding worker's foot. )
4)
Remove the skid and packing cushions.
5)
One person tilt the saddle stitch finisher, another person
remove the lower tray.
remove the lower tray.
6)
Remove the other side similarly.
Click on the first or last page to see other MX-M364N / MX-565N (serv.man5) service manuals if exist.