Sharp MX-M364N / MX-565N (serv.man5) Service Manual ▷ View online
MX-M565N MX-PNX5A/B/C/D 11 – 3
D. Saddle finisher exterior attachment
1) Fix the front inner cover with screws, and close the front
cover.
2) Fix the front lower cover with a screw.
3) Fix the rear cover with a screw.
E. Saddle finisher connection
1)
Install the saddle finisher to the main unit.
2)
Connect the connector.
F. Punch jam processing label attachment
1)
Open the front cover, attach the punch jam processing label.
1
2
2
3
2
1
2
2
1
1
2
000-0000
000-0000
1
2
Label attachment reference
MX-M565N MX-PNX5A/B/C/D 11 – 4
G. Punch position label attachment
1) Attach the punch position label (for the scanner).
2) Attach the punch position label.
H. Turn on the power of the main unit
1) Connect the power plug of the machine to the power outlet,
and turn ON the main power switch and the operation panel
power switch.
power switch.
&IRST
3ECOND
&IT
,ABEL
&IT
CABINET
.O
For DSPF/RSPF
$30&
230&
R2.5 connection line
Edge line R 2.5
CAUTION
Cleaning of the document scan section
When streaks appear on copy or scan
images, open the automatic document
feed unit and clean the document scan
section with the glass cleaner (accessory).
images, open the automatic document
feed unit and clean the document scan
section with the glass cleaner (accessory).
Document scan section
MX-M565N MX-FN11 (FINISHER) 12 – 1
MX-M565N
Service Manual
[12] MX-FN11 (FINISHER)
1. Unpacking
A. Removal of the finisher
* For removal of the finisher, manpower of two persons or more is
required.
1)
Remove the fixing material, and remove the top case.
2)
Remove the bundled items from packing cushion.
3)
Holding the upper part of the saddle stitch finisher by two peo-
ple, pull up the saddle stitch finisher, and make it stand upright.
(Be careful to sliding worker's foot.)
ple, pull up the saddle stitch finisher, and make it stand upright.
(Be careful to sliding worker's foot.)
4)
Remove the skid and packing cushions.
5)
One person tilt the finisher, another person remove the lower
tray.
tray.
6)
Remove the other side similarly.
MX-M565N MX-FN11 (FINISHER) 12 – 2
B. Removal of the protection material
1)
Remove the fixing tapes and protection material.
2)
Open the front upper door, and remove the fixing tapes and
protection material.
protection material.
3)
Remove the screws and remove the fixing material for the
paper exit tray. (four positions)
paper exit tray. (four positions)
C. Packed items check
No.
Name
Quantity
1
Binding head round tapping M4x8
2
2
IT tapping M4x20
2
3
Binding head M4x12
4
4
Step screw B
2
5
Rail
1
6
Rail reception sheet metal
1
7
Connection fixture F (for x3)
1
8
Connection fixture R (for x3)
1
9
Staple position label (For scanner)
1
10
Staple position label (For RSPF/DSPF)
1
11
Punch position label (For scanner)
1
12
Punch position label (For RSPF/DSPF)
1
13
Guide mylar (Not used)
2
14
Cushion (S)
1
15
Cushion (M)
1
16
Cushion (L)
1
1
2
3
6
4
5
7
8
9
11
12
10
14
13
16
15
X3
X3
Click on the first or last page to see other MX-M364N / MX-565N (serv.man5) service manuals if exist.