DOWNLOAD Sharp MX-M364N / MX-565N (serv.man5) Service Manual ↓ Size: 45.47 MB | Pages: 127 in PDF or view online for FREE

MX-M565N  MX-TU12  16 – 1

MX-M565N

Service Manual

 

Before installation, be sure to turn both the operation and main
power switches off and disconnect the power plug from the power
outlet. Make double sure that the data lamp on the operation panel
does not light up or blink when performing installation. 

1) Open the front cabinet, and remove the front cabinet upper.

2) Attach the paper exit tray, and fix it with the screw.

3)

Attach the front cabinet upper, and close the front cabinet.

4)

Attach the paper holding arm.

5)

Attach the full detection actuator.

Be careful of the installing direction of the full detection actua-
tor.

1)

Connect the power plug of the machine to the power outlet,
and turn ON the main power switch and the operation panel
power switch.

1

Paper exit tray

1

2

Screw

1

3

Paper holding arm

1

4

Full detection actuator

1

2

1

3

4

MX-M565N  MX-KB11 N  17 – 1

MX-M565N

Service Manual

 

Before installation, be sure to turn both the operation and main
power switches off and disconnect the power plug from the power
outlet. Make double sure that the data lamp on the operation panel
does not light up or blink when performing installation.

1) Remove the front cabinet upper.

2) Remove the operation panel cover.

3)

Remove the operation panel upper cover.

1)

Slide the operation panel unit to the left, and put it down.
Remove the operation panel cover.

2)

Remove the operation panel lower cover.

3)

Turn over the operation panel unit.

1

Keyboard unit

1

2

Operation panel lower cover (For keyboard)

1

3

Fixing screw (M4 x 8 S-tight)

3

4

Keyboard front cabinet cover

1

MX-M565N  MX-KB11 N  17 – 2

4) Remove the clamp. Peel off the mylar and disconnect the con-

nector.

1) Turn over the operation section cover.

2) Remove the front cabinet cover from the Keyboard unit and fix

the Keyboard front cabinet cover in the packed items (No.4).
When fixing the Keyboard front cabinet cover, use the screws
fixing the front cabinet cover with the Keyboard unit.

3) Attach the keyboard unit and fix it with the fixing screw.

4)

Connect the keyboard interface harness and attach the opera-
tion section cover.

Be sure to place the key interface harness between the opera-
tion section cover and the FFC. (Section A)

1)

Connect the connector to the operation panel unit , and fix the
harness with the clamp.

When assembling, put the mylar on the flat cable and fix them
with the clamp.

Fit the flat cable edges with sections A of the Mylar, and
remove slack in sections B of the flat cables.

MX-M565N  MX-KB11 N  17 – 3

When attaching the operation panel unit, insert the mylar tip
into the cover of the operation section.

Allow slack around section A of the flat cable.

2) Attach the operation panel unit.

3) Attach the operation panel lower cover which was removed at

procedure B-2).

4) Attach the operation panel cover.

1)

Attach the operation panel upper cover.

Connect the terminal so that it faces downward between the
arrow marks.

2)

Attach the operation panel cover.

3)

Attach the front cabinet upper.