DOWNLOAD Sharp MX-M364N / MX-565N (serv.man5) Service Manual ↓ Size: 45.47 MB | Pages: 127 in PDF or view online for FREE

MX-M565N  MX-AM10  26 – 1

MX-M565N

Service Manual

 

1) Enter the product key to enable the functions.

a)

Enter the system setting mode.

b)

The machine enters the product key input mode.

c)

Enter the product key.

d)

Press the registration key.

2) After completion of the product key input, turn OFF the power

switch on the operation panel of the machine, and turn OFF
the main power switch.

3) Turn ON the main power switch and the power switch on the

operation panel.

4) Register the key.

a)

Touch [Action panel] button on the right upper side of the
operation panel of the home screen, and select "Edit
home."

b)

Select "Key registration."

c)

Select the key to be registered.

With the above operations, the key icon appears on the home
screen.

Execute SIM22-10 (Machine configuration display) to check to con-
firm that the set functions are enable.

Perform the  setting below according to the user environment.
-  (Network Settings/ Protocol settings menu) IP Address
-  (Network Settings/ Services Settings menu) DNS
When a proxy server is used:
-  (Application Settings/ Web Browser Settings menu)

Place a check mark in "Use Proxy Server".

-  (Network Settings/ Proxy Setting menu)

-  Proxy Server Address
-  User Name
-  Port Number
-  Address without Using Proxy

(Enter all the authenticated LAN addresses being used by
using semicolons to separate.)

Actually access a web site to check the operation.

1

Operation manual (CD-ROM)

1

2

Product key sheet

1

1

2

MX-M565N  IC card reader  27 – 1

MX-M565N

Service Manual

 

There are two kinds of card reader holders.
Choose the suitable one according to the card reader to be
installed.

Before installation, be sure to turn both the operation and main
power switches off and disconnect the power plug from the power
outlet. Make double sure that the data lamp on the operation panel
does not light up or blink when performing installation.

1)

Remove the front cabinet upper.

2)

Remove the operation panel cover.

3)

Remove the operation panel upper cover.

1

Non-contact IC card 
reader

RFIDeas

RDR-6081AKU

2

Equitrac

Y591-EHID-201 v01

3

Elatec

TWN3

4

RFIDeas

RDR-7582AKU

1

LHLDZ2230FCZZ

IC Card reader holder B

AX

1

2

LHLDZ2231FCZZ

IC card reader holder C

AX

1

3

PTPE-0352FCZZ

Card reader fixing tape 
(Double-stick tape)

AP

2

4

DHAI-4709FCPZ

USB mini harness-AR

BP

1

5

LBNDJ0013FCZ1

Binding band

AE

2

6

XEBS730P08000

Screw (M3 x 8 P tight)

AC

3

LHLDZ2230FCZZ

IC card reader holder B

Y591-EHID-201 v01

LHLDZ2231FCZZ

IC card reader holder C

RDR-6081AKU, TWN3, 
RDR-7582AKU

1

2

3

4

1

2

3

4

5

6

MX-M565N  IC card reader  27 – 2

1) Attach the card reader fixing tape to the IC card reader holder

referring to the notches as the reference.

The holder type and the attachment procedure differ depend-
ing on the kind of the IC card reader.

Vertical and horizontal directions: Fit with the notches.
Holder type C
RDR-6081AKU, TWN3, RDR-7582AKU

Vertical direction: Fit with the notch.
Horizontal direction: Fit with the notch and the lower edge.

2)

Cut out the boss.

The cutting position of the boss of the IC card reader holder
differs depending on the kind of the IC card reader.

3)

Attach the IC card reader to the IC card reader holder accord-
ing to the attachment reference ribs.

The attachment reference position differs depending on the
kind of the IC card reader.

Holder type B
Y591-EHID-201 v01
(No reference position)

MX-M565N  IC card reader  27 – 3

4)

Attach the IC card reader holder to the operation panel of the
machine.

5)

Bind up the cables of the card reader.

The length and the winging method differ depending on the
kind of the IC card reader.

Holder type B
Y591-EHID-201 v01
Pass the binding band through the hole before winding.

Hang the cable on the four hooks and wind so that there is no
slack.

If there is some slack, the cable may be pinched.

Fix with a screw.