Sharp MX-BMX1 Service Manual ▷ View online
Replacement Adjustment
20 October 2010
3-11
COVERS
3.3.5 UPPER TOP COVER
1. Open the Top Cover.
2. Remove screws [A] ( x4 ).
3. Remove nut plates [B].
4. Lift off the Upper Top Cover [C].
2. Remove screws [A] ( x4 ).
3. Remove nut plates [B].
4. Lift off the Upper Top Cover [C].
[A]
[C]
[B]
20 October 2010
3-12
COVERS
3.3.6 REAR TOP COVER
1. Remove the nut [A] ( x 1).
2. Remove the screw [B] ( x 1).
2. Remove the screw [B] ( x 1).
NOTE: Lift the Jam clearance baffle [C] to get better acces to the screw.
3. Remove the screws [D] ( x 2).
4. Remove the Rear Top Cover.
4. Remove the Rear Top Cover.
[D]
[C]
[B]
[A]
Replacement Adjustment
20 October 2010
3-13
COVERS
3.3.7 TOP COVER ASSEMBLY
[A]
[B]
Removal
1. Remove Front and Rear cover (
1. Remove Front and Rear cover (
3.3.1 ).
2. If a Cover Feeder is installed - disconnect connectors [A].
3. Squeeze the barbs on the sides and remove connectors [B] from Top cover.
3. Squeeze the barbs on the sides and remove connectors [B] from Top cover.
20 October 2010
3-14
COVERS
4. Remove nuts [C] ( x4 ).
5. Remove screw [D] ( x1 ) and [E] ( x1 ).
6. Move Top cover towards the front side.
7. Remove screws [F]( x2 ) and adjustment plates [G] ( x2 ).
8. Lift off the Top cover.
5. Remove screw [D] ( x1 ) and [E] ( x1 ).
6. Move Top cover towards the front side.
7. Remove screws [F]( x2 ) and adjustment plates [G] ( x2 ).
8. Lift off the Top cover.
Replacement
1. Reverse the removal procedure.
1. Reverse the removal procedure.
[C]
[D]
[F]
[C]
[F]
[G]
[G]
[E]
Click on the first or last page to see other MX-BMX1 service manuals if exist.