Sharp MX-BMX1 Service Manual ▷ View online
BOOKLET MAKER MX-BMX1
SERVICE MANUAL
24 November 2010
Subject to change
Page intentionally blank
III
20 October 2010
IMPORTANT SAFETY NOTICES
Before disassembling or assembling parts of the Mail Inserting System and pe-
ripherals,
make sure the power cord is unplugged.
The wall outlet should be near the Mail Inserting System and easily accessible.
Note that some components of the Mail Inserting System
and peripherals are sup-
plied with electrical voltage even if the main power switch is turned off.
If any adjustment or operation check has to be made with exterior covers off or
open while the main switch is turned on, keep hands away from electrical or
mechanically driven components.
OBSERVANCE OF ELECTRICAL SAFETY STANDARDS
The Mail Inserting System and its peripherals must be installed and maintained
by a customer service representative who has completed the training course
on those models.
Always connect the equipment to a prop-
erly grounded power source. In doubt, have
the power source checked by a qualified
electrician.
WARNING: Improper connection of the
WARNING: Improper connection of the
equipment grounding conductor can result
in electrical shock.
Always follow all warnings marked on, or
Always follow all warnings marked on, or
supplied with, the equipment.
Always locate the equipment on a solid
Always locate the equipment on a solid
support surface with adequate strength for
the weight of the machine.
Always exercise care in moving or relocat-
Always exercise care in moving or relocat-
ing the equipment.
Always keep magnets and all devices
Always keep magnets and all devices
with strong magnetic field away from the
machine.
Never use a ground adapter plug to connect
the equipment to a power source that lacks
a ground connection terminal.
Never attempt any maintenance function
Never attempt any maintenance function
that is not specifically described in this
documentation.
Never remove the covers or guards that
Never remove the covers or guards that
are fastened with screws, unless you are a
trained Service representative.
Never install the unit near a radiator or any
Never install the unit near a radiator or any
other heat source.
Never override or “cheat” electrical or me-
Never override or “cheat” electrical or me-
chanical interlock devices.
Never operate the equipment if you notice
Never operate the equipment if you notice
unusual noises or odors. Disconnect the
power cord from the power source and call
your customer service engineer to correct
the problem.
PREVENTION OF PHYSICAL INJURY
SAFETY AND ECOLOGICAL NOTES FOR DISPOSAL
Dispose of replaced parts in accordance with local regulations.
IV
20 October 2010
WARNING:
To avoid hazardous situations like for instance electric shock or danger while
exposed to moving, rotating or cutting devices, do not remove any covers,
guards or screws other than those specified in this manual.
Turn off the power and disconnect the power plug (by pulling the plug, not the
cable) if any of the following conditions exists:
You drop objects or spill something into the equipment.
You suspect that your equipment needs service or repair.
Your equipment’s covers has been damaged.
You notice unusual noises or odours when operating the equipment.
If the power cable or plug becomes worn out or otherwise damaged.
Before cleaning and care (unless otherwise specifically instructed).
Electromagnetic compliance:
This is a Class A product. In a domestic environment this product may
cause radio interference in which case the user may be required to take
adequate measures.
The product (System) which is connected to this machine will be class A.
•
•
•
•
•
•
•
•
•
•
•
SAFETY DURING OPERATION