Sharp MX-BMX1 (serv.man9) User Manual / Operation Manual ▷ View online
5
45
Trimmer
Clearing misfeed(s)
Raise the infeed roller shaft (A) by lifting latch (B).
Remove the misfed sheets in the infeed area.
After the misfed sheets are removed, lower the latch (B) and place the infeed roller shaft
into operating position.
Clearing misfeed in input area
The upper trimmer blade on the trimmer is protected by a knife protection plate that moves
away during the cutting stroke. Jams can occur in the input area or the exit area.
WARNING:
Never put fingers or other parts of the body between the upper and lower trimmer knives.
A
B
5
46
Clearing misfeed(s), continues
A
B
Lift the exit compressing brackets (A).
Secure them under the latch (B).
Remove the misfed sheets from the exit area.
After the misfed sheets are removed, lift up the latch (B) and place the compressing
brackets in operating position.
Clearing misfeed in exit area
5
4
Open the Top Cover.
Lift the jam clearance baffle (A).
Remove the misfed cover.
Put the jam clearance baffle back in normal position.
Clearing misfeed(s) in vertical transport area
Cover Feeder
A
5
48
Open the top cover.
Lift up both upper feed belts (A).
Note
Press the green dots (B) on the latches to release.
Remove the misfeeds.
Place the upper feed belts in normal position.
Close the top cover.
Inside the Book Folder
Exit area
Open the top cover.
Remove the misfeeds through the jam clearance
area (A).
Close the top cover.
A
Clearing misfeed(s)
Book Folder
B
B
A
Click on the first or last page to see other MX-BMX1 (serv.man9) service manuals if exist.