Sharp MX-BMX1 (serv.man9) User Manual / Operation Manual ▷ View online
6
53
If feed errors occur, the feed belts needs to be cleaned or the pressure on the upper feed
belts needs to be increased. To clean the feed belts, see section , REMARKS Maintaining
Your Machine. To increase the pressure on the upper feed belts follow this procedure.
Open the top cover.
Place both springs in the upper position.
Close the top cover.
Book Folder fault codes
Feed errors
Spring in normal position
Spring in upper position
6
54
Page intentionally blank.
55
7. REMARKS
Do’s And Don’ts
• Always follow all warnings marked on, or supplied with, the equipment.
• Always exercise care in moving or relocating the equipment.
Caution:
• Unplug the powercord from the wall outlet and machine before you move or relocate
the equipment.
• Do not remove the covers or guards that are fastened with screws.
• Do not override or bypass electrical or mechanical interlock devices.
• Do not operate the equipment if you notice unusual noises or odors. Disconnect the
powercord from the power source and call your authorized technician to
correct the problem.
Warning:
• Do not put fingers or other parts of the body between the upper and lower trimmer
knives.
• Do not switch off the main power switch while machine is running. Make sure machine
cycle has ended.
• Do not open covers while machine is running.
• Do not move machine while machine is running.
7
56
Where to put Your Machine
Machine environment
Power connection
• Always connect the equipment to a properly grounded power source. If in
doubt, have the power source checked by a qualified electrician.
• WARNING: Improper grounding of the equipment can result in electrical shock.
• Never connect the machine to a power source that lacks a ground connection
terminal.
• Always locate the equipment on a solid support surface with adequate strength for the
weight of the machine.
• Always keep magnets and all devices with strong magnetic fields away from the
machine.
If the place of installation is air-conditioned or heated, do not place the machine where it
will be:
• Subjected to sudden temperature changes.
• Directly exposed to cool air from air-conditioner.
• Directly exposed to heat from heater.
Click on the first or last page to see other MX-BMX1 (serv.man9) service manuals if exist.