MX-6500N, MX-7500N (serv.man110). CAUTIONS WHEN INSERTING AND REMOVING THE HARNESS CONNECTOR DURING OPERATION PANEL INSTALLATION. — Sharp Copying Equipment Technical Bulletin (repair manual)

Model
MX-6500N MX-7500N (serv.man110)
Pages
2 Few pages! See other manuals at the bottom of the first or last page.
Size
111.5 KB
Type
PDF
Document
Technical Bulletin
Brand
Device
Copying Equipment / CAUTIONS WHEN INSERTING AND REMOVING THE HARNESS CONNECTOR DURING OPERATION PANEL INSTALLATION.
File
mx-6500n-mx-7500n-sm110.pdf
Date

View Sharp MX-6500N / MX-7500N (serv.man110) Technical Bulletin online

 
 
 
Sharp Electronics (UK) Ltd., Technical Services Group
 
CCE-1428 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
1. Model Name: 
MX6500N – MX7500N 
 
2. Description: 
We would like to inform you of the cautions when installing the operation panel to the  
 
 
 
main unit of MFP. 
 
 
 
When inserting the harness connector of the main unit of MFP into PWB (LVDS PWB) of  
 
 
 
the operation panel, it may damage the harness connector of the main unit.  When  
 
 
 
conducting this work, please pay attention to the cautions below and then start the work. 
 
 
 
 
 (1) When inserting and removing the connector during the mounting\demounting of the  
operation panel, it is recommended that the connector is at eye-level so that you can be in a 
better  position to view the condition of the connector while performing work.  
 
 
 
 
 (2) Please insert the connector in parallel and horizontally with the connector of PWB  
 
 
   
  side, holding the upper and lower sections of the bundle harness only and not the  
 
 
    
  unlock lever section. 
 
 
 
 
 
 
 
 
 
 
 
 (3) When removing the harness connector (CN7) of the main unit, please be careful not  
 
 
  
   to apply any force in a slanting direction against both unlock levers of the connector. 
 
 
 
 
 
 
 
 
 
  
 
 
CAUTIONS WHEN INSERTING AND REMOVING 
THE HARNESS CONNECTOR DURING 
OPERATION PANEL INSTALLATION.
 
TECHNICAL BULLETIN 
 
Date:  
3
rd
 June 2015 
Model:  
MX6500N – MX7500N 
Ref.:   
CCE-1428 
Colour:  
White 
Page:  
1 of 2 
 
 
 
Sharp Electronics (UK) Ltd., Technical Services Group
 
CCE-1428 
 
(4) When inserting/removing other connectors, please be careful not to apply any stress  
 
 
  
   
to the lock lever sections (○sections) of this connector (CN7) by the fingers etc. 
 
 
 
 
 
CN7 
Page of 2
Display

Download Sharp MX-6500N / MX-7500N (serv.man110) Technical Bulletin

Here you can view online or download Sharp MX-6500N / MX-7500N (serv.man110) Technical Bulletin in pdf. This Technical Bulletin can help you recover, restore, fix, disassemble and repair Sharp MX-6500N / MX-7500N (serv.man110) Copying Equipment. Information contained in Sharp MX-6500N / MX-7500N (serv.man110) service manual (repair manual) typically includes:

  • Disassembly, troubleshooting, programming, maintenance, remote, adjustment, installation and setup instructions.
  • Schematics, wiring and block diagrams.
  • Printed wiring boards (PWB) and printed circuit boards (PCB).
  • Parts list (bill of materials).