MX-6500N, MX-7500N (serv.man120). ROM UPGRADE ..... (3) Ver 03.00.X100 — Sharp Copying Equipment Technical Bulletin (repair manual)

Model
MX-6500N MX-7500N (serv.man120)
Pages
2 Few pages! See other manuals at the bottom of the first or last page.
Size
28.31 KB
Type
PDF
Document
Technical Bulletin
Brand
Device
Copying Equipment / ROM UPGRADE ..... (3) Ver 03.00.X100
File
mx-6500n-mx-7500n-sm120.pdf
Date

View Sharp MX-6500N / MX-7500N (serv.man120) Technical Bulletin online

 
 
 
Sharp Electronics (UK) Ltd., Technical Services Group
 
CCE-1413 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
1. Model Name: 
MX6500N – MX7500N 
 
2. Description:
 
Upgrade of ICUM, ICU1, PCU-ROM and E-Manual 
 
From mid-November 2014 production 
ROM 
Control No. 
ICUM 
ICU1 
ICU2 
PCU 
SCU 
DSPF 
E-Manual 
D00 
0300X100  0300X100  0100X100  0200X100  0100X10a  0100X100  0170X100 
  Item of change: See the attached sheets. 
 
 
 
 
 
ROM Version Combination History Table 
 
No. 
ROM 
Control 
No. 
ICUM 
ICU1 
ICU2 
PCU 
SCU 
DSPF  E-Manual  Action 
T/R No 
(2) 
C00 
0200X100  0200X100  0100X100  0103X100  0100X10a  0100X100  0160X100 
2014/1 
Mid 
CCE-1265 
(1) 
B00 
0110X100  0110X100  0100X100  0102X100  0100X10a  0100X100  0150X100 
2013/10 
Mid 
CCE-1236 
 
 
ROM UPGRADE ..... (3) Ver 03.00.X100
 
TECHNICAL BULLETIN 
 
Date:  
23
rd
 January 2015 
Model:  
MX6500N – MX7500N 
Ref.:   
CCE-1413 
Colour:  
White 
Page:  
1 of 2 
 
 
 
Sharp Electronics (UK) Ltd., Technical Services Group
 
CCE-1413 
 
[Description] 
No. 
Item 
Details 
Main unit control 
Following settings have been added to the Detail tab in Paper Settings. 
1) Motor Speed Setting 
2) Registration Adjustment (Manual) 
3) Maximum Density Setting 
 
Setting range of Paper Settings has been expanded as listed below: 
1) Fusing Temperature Settings (Old: -10 to 10/ New: -20 to 20) 
2) Primary Transfer Setting  (Old: -20 to 20/ New: -30 to 30) 
3) Secondary Transfer Setting (Old: -20 to 20/ New: -30 to 30) 
4) PTC Current Value Setting (Old: -30 to 30 / New: -40 to 40) 
5) Settable weight of Coated Paper (Gloss) and Coated Paper (Matt) (Old: 55 to 256g/m² 
/ New: 55 to 300g/m²) 
Main unit control 
Custom size paper output has been allowed upon the setting of "Edge-to-Edge Printing" 
on printer driver.  
This allows the more appropriate "Edge-to-Edge Printing" on fixed size paper. 
Main unit control 
Modification has been made so that when Saddle Stitch and Trimming are set for output 
of one sheet to the machine with MX-FN22, the paper is trimmed but no saddle stitch is 
performed. 
Main unit control 
Correction of failure to match the print position on side 1 and 2 of SRA3 paper.  
The failure occurred after the print position adjustment. 
Main unit control 
Correction of failure to output paper onto Right tray when Booklet maker and Right tray 
are mounted. 
Main unit control 
Remedy of the problem with colour change which occurs in the midst of printing. 
 
*You don't see any improvement just by upgrading the firmware. Please execute Colour 
Balance adjustment at the time of firmware upgrade as may be necessary. 
Main unit control 
Modification of a problem which occurs with following steps: 1) Print out a test pattern in 
Paper Settings from Bypass tray in duplex. 2) The Bypass tray gets empty 3) Add papers 
to the bypass tray. 4) The test pattern is printed in simplex. 
Main unit control 
Modification has been made so that one User Type setting can be applied to more than 
one tray. This allows auto tray change in case of tray empty. 
Main unit control 
The paper weight allowed for feeding from bypass tray on LCT has been expanded to 
300g/m². 
Also Heavy Paper 3, Heavy Paper 4, Glossy Paper, Labels and Embossed are allowed 
to select as Paper Type. 
10  Main unit control 
"Side1/2, XY Ratio Settings" is no more displayed on Paper Settings registration screen 
on installation of Fiery because the magnification adjustment cannot be reflected. 
11  Main unit control 
Multi-level print speed setting has been implemented to increase the print speed of 
custom size paper. The speed varies depends on the paper size. 
12  Main unit control 
Followings have been changed to improve the registration level: 
(1) The timing to perform the registration adjustment 
(2) Default value of AG in SIM44-28 to perform the registration adjustment when 
necessary. 
SIM44-28 AG(RG_PERM_TIMER): Changed from 1 to 0. 
 
*Default value won't change just by upgrading the firmware. Please change the value of 
AG in SIM44-28 at the time of firmware upgrade. In addition, execute SIM50-22 if 
necessary. 
 
 
 
Page of 2
Display

Download Sharp MX-6500N / MX-7500N (serv.man120) Technical Bulletin

Here you can view online or download Sharp MX-6500N / MX-7500N (serv.man120) Technical Bulletin in pdf. This Technical Bulletin can help you recover, restore, fix, disassemble and repair Sharp MX-6500N / MX-7500N (serv.man120) Copying Equipment. Information contained in Sharp MX-6500N / MX-7500N (serv.man120) service manual (repair manual) typically includes:

  • Disassembly, troubleshooting, programming, maintenance, remote, adjustment, installation and setup instructions.
  • Schematics, wiring and block diagrams.
  • Printed wiring boards (PWB) and printed circuit boards (PCB).
  • Parts list (bill of materials).