DOWNLOAD Sharp MX-4140N / MX-4141N / MX-5140N / MX-5141N (serv.man8) Service Manual ↓ Size: 40.14 MB | Pages: 127 in PDF or view online for FREE

Model
MX-4140N MX-4141N MX-5140N MX-5141N (serv.man8)
Pages
127
Size
40.14 MB
Type
PDF
Document
Service Manual
Brand
Device
Copying Equipment / Installation Manual Revised June 2014.
File
mx-4140n-mx-4141n-mx-5140n-mx-5141n-sm8.pdf
Date

Sharp MX-4140N / MX-4141N / MX-5140N / MX-5141N (serv.man8) Service Manual ▷ View online

MX-5141N  IC card reader  28 – 2
B. Attachment to the IC card reader holder
1)
Attach the card reader fixing tape to the IC card reader holder
referring to the notches as the reference.
* The holder type and the attachment procedure differ
depending on the kind of the IC card reader.
Holder type B
Y591-EHID-201 v01
Vertical and horizontal directions: Fit with the notches.
Holder type C
RDR-6081AKU, TWN3, RDR-7582AKU
Vertical direction: Fit with the notch.
Horizontal direction: Fit with the notch and the lower edge.
2)
Cut out the boss.
* The cutting position of the boss of the IC card reader holder
differs depending on the kind of the IC card reader.
Holder type C
RDR-6081AKU, RDR-7582AKU
Holder type C
TWN3
3)
Attach the IC card reader to the IC card reader holder accord-
ing to the attachment reference ribs.
* The attachment reference position differs depending on the
kind of the IC card reader.
Holder type B
Y591-EHID-201 v01
(No reference position)
MX-5141N  IC card reader  28 – 3
Holder type C
RDR-6081AKU, RDR-7582AKU
Holder type C
TWN3
4)
Attach the IC card reader holder to the operation panel of the
machine.
5)
Bind up the cables of the card reader.
* The length and the winging method differ depending on the
kind of the IC card reader.
Holder type B
Y591-EHID-201 v01
Pass the binding band through the hole before winding.
Hang the cable on the four hooks and wind so that there is
no slack.
* If there is some slack, the cable may be pinched.
Fix with a screw.
MX-5141N  IC card reader  28 – 4
Fold and put the rest of the cable under the bundle.
Fix the cable at the USB connector socket section in the
USB mini harness side.
* Fix so that the USB connection position is at the center of
the card reader holder.
Holder type C
RDR-6081AKU, RDR-7582AKU
Hang the cable on the two hooks and wind it so that there is
no slack.
* If there is some slack, the cable may be pinched.
Fold and put the rest of the cable under the bundle.
Bind the root section of the USB connector in the card
reader side and the USB connector socket section in the
USB mini harness side with the binding bands.
* Fix so that the USB connection position is at the center of
the card reader holder.
Holder type C
TWN3
Hang the cable on the two hooks and wind it so that there is
no slack.
* If there is some slack, the cable may be pinched.
Fold and put the rest of the cable under the bundle.
Bind the root section of the USB connector in the card
reader side and the USB connector socket section in the
USB mini harness side with the binding bands.
* Fix so that the USB connection position is at the center of
the card reader holder.
MX-5141N  IC card reader  28 – 5
C. Attach the operation panel upper cover
D. Connect the connector of the IC card reader to 
the connector of the machine
E. Turn ON the power of the main unit
1)
Connect the power plug of the machine to the power outlet,
and turn ON the main power switch and the operation panel
power switch.
F. System setting modification
IC card reader device registration
1)
Device registration
a)
Enter the card reader setting menu as shown below.
System Settings
Registration
b)
Press [Read] button.
c)
Disconnect the connector which links the machine and the
IC card reader, and then insert it back.
d)
Press [OK] button.
e)
Check to confirm that values are displayed on "Product
ID" and "Vender ID".
f)
Press [SUBMIT] button, and check to confirm that the suc-
cess dialog message is displayed.





Page of 127
Display

Sharp MX-4140N / MX-4141N / MX-5140N / MX-5141N (serv.man8) Service Manual ▷ Download