Sharp MX-4140N / MX-4141N / MX-5140N / MX-5141N (serv.man8) Service Manual ▷ View online
MX-5141N MX-TRX2 (EXIT TRAY UNIT) 17 – 1
MX-5141N
Service Manual
[17] MX-TRX2 (EXIT TRAY UNIT)
1. Unpacking
A. Removal of the exit tray unit
B. Packed items check
2. Installation
NOTE: Before installation, be sure to turn both the operation and
main power switches off and disconnect the power plug
from the power outlet. Make double sure that the data lamp
on the operation panel does not light up or blink when per-
forming installation.
from the power outlet. Make double sure that the data lamp
on the operation panel does not light up or blink when per-
forming installation.
A. Installation of the exit roller unit
1)
Open the right door. Remove the screw, and remove the con-
nector cover.
nector cover.
2)
Remove the screw. Disengage the engagement in the front
side then in the rear side, and remove the paper exit cover.
side then in the rear side, and remove the paper exit cover.
3)
Connect the connector, and install the exit roller unit (Packed
items). Use the screw which was removed in step 3) and fix
the unit.
items). Use the screw which was removed in step 3) and fix
the unit.
4)
Install the connector cover, and fix it with the screw.
No.
Name
Quantity
1
Exit roller unit
1
2
Full detection actuator
1
1
2
1
2
3
4
MX-5141N MX-TRX2 (EXIT TRAY UNIT) 17 – 2
5)
Install the exit tray unit (A) and the full detection actuator (B)
(Packed items).
(Packed items).
* Be careful of the installing direction of the full detection actu-
ator.
B. Turn on the power of the main unit.
1)
Connect the power plug of the machine to the power outlet,
and turn ON the main power switch and the operation panel
power switch.
and turn ON the main power switch and the operation panel
power switch.
C. Tray setting
Use SIM26-1 to set the tray YES/NO.
A
B
B
MX-5141N MX-LT10 (LONG PAPER FEEDING TRAY) 18 – 1
MX-5141N
Service Manual
[18] MX-LT10 (LONG PAPER FEEDING TRAY)
1. Unpacking
A. Packed items check
2. Installation
Do not insert the finger in the hook part of the tray.
A. Long paper feeding tray attachment
1)
Open the long paper feeding tray guide and hook it to the lock
of the long paper feeding tray.
of the long paper feeding tray.
2)
Pull out the guide of the machine.
Do not pull out the MF tray unit with the guide.
3)
Hook the Long paper feeding tray to the guide of the machine.
4)
Insert the guide of the machine.
This tray can only be used for long paper feeding.
Do not leave long paper for an extended period of time.
You can use long paper with this tray.
No.
Name
Quantity
1
Long paper feeding tray
1
MX-5141N MX-KB11 N (KEYBOARD) 19 – 1
MX-5141N
Service Manual
[19] MX-KB11 N (KEYBOARD)
1.Unpacking
A.Check the packed items
2.Installation
Before installation, be sure to turn both the operation and main
power switches off and disconnect the power plug from the power
outlet. Make double sure that the data lamp on the operation panel
does not light up or blink when performing installation.
A.External fixture removal
1) Remove the front cabinet upper.
2) Remove the operation panel cover.
3) Remove the operation panel upper cover.
B.Operation panel removal
1) Slide the operation panel unit to the left, and put it down.
Remove the operation panel cover.
2) Remove the operation panel lower cover.
3) Turn over the operation panel unit.
No.
Name
Quantity
1
Keyboard unit
1
2
Operation panel lower cover (For keyboard,
Not used )
1
3
Fixing screw (M4 x 8 S-tight)
3
4
Keyboard front cabinet cover
1
2
‘13/Nov
2
Click on the first or last page to see other MX-4140N / MX-4141N / MX-5140N / MX-5141N (serv.man8) service manuals if exist.